SRMO road road side drains, parking and berms at Ind. Area Sultanpur Distt. Chamba (HP). (SH- P/L interlocking pavers and road side drain (Balance work)

Amount

Excavation in foundations, trenches etc. in earth work in all kinds of soils such as pick work, jumper work, pick jumper work, pick jumper blasting work, blasting work in soft and hard rock conglomerate rock or saturated soil and its intermediate classification of soil including chiseling/ wedging out of rocks (where blasting is prohibited) and pumping or bailing watering /dewatering upto any lift stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in layers when required into plinth sides of foundations consolidation each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within any leads including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in- Charge.

Providing and Laying concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 and 1203 P.C.C nominal mix 1:4:8 (1 cement:4 sand:8 graded stone aggregate 40mm nominal size) (25 mm aggregates) and curing complete including cost of form work with in all lead and lifts.

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C grade M 10 Nominal mix 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) and curing complete including cost of form work with in all lead and lifts.

Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 including carriage of material with in all lead and lifts

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 40mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge.80mm thick cement concrete paver block of M-40 grade approved by HPPWD with approved color design and pattern and including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 R.C.C grade M 20 1:2:4 (1 cement : 2 Sand : 4 graded stone aggregate 20mm nominal size) and curing complete including cost of form work with in all lead and lifts.

Demolition below G.L. upto all depth and disposal of unserviceable materials within all lead un-reinforced cement concrete more than 15 cm. Thickness. Including carriage of material with in all lead and lifts.

Steel work welded in built up sections/ framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structuralsteel etc. as required. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, and stacking of serviceable material within all lead as per direction of Engineer-in-Charge.

Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin- charge.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foregin matters Enamel paint other than white including carriage of material with in all lead and lifts

Pankaj Sharma (BID ID -448640)

Kalim Mohd (BID ID -447616)