Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.6 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹20.4 L+₹53,063 (2.68%)Rejected-Finance | L2 | Rejected-Finance HIGHER BID VALUE | |
| 3 | L3₹20.8 L+₹1.0 L (5.07%)Rejected-Finance RANGAPAHAR RAILWAY CROSSING GATE NO 1 DIMAPUR 797112 NAGALAND | DIMAPUR | NAGALAND | 797112 | L3 | Rejected-Finance HIGHER BID VALUE | |
| 4 | L4₹21.6 L+₹1.7 L (8.66%)Rejected-Finance | L4 | Rejected-Finance HIGHER BID VALUE | |
| 5 | L5₹21.8 L+₹2.0 L (9.87%)Rejected-Finance | L5 | Rejected-Finance HIGHER BID VALUE |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
1 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 869 EWS
GE 869 EWS PIN-913869 C/O 99 APO
REPAIR MAINT TO WALL PLASTERING CEILING PLASTER PLUMBING SHAFTS FOR PERMT BLDGS OF ENGR REGT HAV QTRS OFFICERS QTRS AND WELCOME MAINT TO OFFRS MD ACCN AT UPPER LEIMAKHONG MIL STN
2022_MES_519944_1
8411/E8
Open Tender
Civil Works
Item Rate
210 days
LEIMAKHONG
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
GE 869 EWS
₹40,000
Yes
12 Aug 2022
4 May 2022
3 Jun 2022
4 May 2022
1 Jun 2022
18 May 2022
60 days
Amount
B/R work
Preparation of old decorated surfaces of walls including brooming, down scraping down smoke soot, moulds, masss and efflorscent salts and trading oil and greasy spots & removing of nails mark & applying one coat of white wash on wall on old decorated surfaces complete all as specified and directed.
Preparation of old decorated surfaces of ceiling including brooming, down scraping down smoke soot, moulds, masss and efflorscent salts and trading oil and greasy spots & removing of nails mark & applying one coat of white wash on ceiling on old decorated surfaces complete all as specified and directed.
Mateirial & labour for Preparation of old decorated surfaces of wall including washing, rubbing down and stopping of distempered and painted surfaces ,brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and one coat of oil emulsion distemper all as specified and directed.
All as per item No. 5 here-in- before but two coat of oil bound distemper and -ditto-
Preparation of old painted surefaces of wood based material exc 10 cm width or girth & applying one coat of synthetic enamel paint on wooden surfaces.
M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
Material & labour for preparing old wooden surface by cleaning & wiping filling with wooden filler and applying a coat french polishing on surfaces of any description, width or girth complete all as specified and directed
Taking down cement plaster of any thickness on brick or stone walls etc including raking out joints, hacking for key and scrubbing down with water built in cement mortar complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces of wall finished even and fair without using extra cement complete all as specified and directed.( Dhimapur sand)
M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed.
M & L for rendering 5mm thick plaster in cement mortar (1:3) on other than fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Using Dimapur Sand)
M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.
S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl existing and taking down complete all as specified and directed.
S&F as in replacement stainless steel plate rack of size 24" x 36" x 10" complete all as specidfied and directed. (Make: Blue Star cat No KPR-312 or equivalent in Nirali/Jain Brothers/Prayag)
Disconnecting existing tanks,exc 250 & n exc 500 setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. (Cleaning repairing, etc. measured separately).
S & F in repairs water storage tank ISI marked of capacity 500 ltrs hoisted and fixed in position including ball brass valves of 20mm dia, high pressure with polythene float and fly nut complete, screwed for iron pipe of brass ferrule and fixed in 20mm bore GI tube etc complete all as specified and directed.
S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Hacking out old broken glass exc 1.5 sqm (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane with hacking out old broken glass sheet complete all as specified and as directed.
S & F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with 140 mm overall lenth of cover plate.complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.
S&F 18/19mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed
S&F 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed
S & F 30 mm wide continuous (piano) hinges,mild steel, bright finish or electrogalvanised complete all as specified and directed.
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed
S&F magnetic door catches of standard size, mild steel body and striking plate including letting in and fixed complete all as specified and directed.
S&F in repair vitreous china squatting pan “Orissa pattern of size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed.
S&F in repair light coloured vitreous china WHB white oval shape of 550mmx400mm (minimun) on new brackets excluding taps, 32mm dia waste china & plug including bracket etc complete all as specified and directed.
S&F in repairs pillar taps, ISI marked cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks for iron pipes for 15 mm bore dia of pipe and fixed complete all as specified and directed.
S&F in repairs PVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe 600mm long 15mm bore with brass heads and washers all as specified and directed.
S&F 75mm dia PVC (SWR) floor trap, plain with grating including setting and jointing with solvent cement complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S & F in repairs bore bib taps, ISI marked cast copper alloy, chromium plated fancy type screwed down, screwed for iron pipe or for brass ferule for 15 mm bore dia of pipe complete all as specified and directed.
S&F in repairs stop valves 15 mm dia cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and directed.
S&F in repair for brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union any colour for fixing with 15mm pipe complete all as specified and directed.
S&F in repairs brass chromium plated, 600mm long between flanges tubular towel rail , 20mm dia, D type. fixed with and including chromium plated brass screws and wooden plastic cleats, complete all as specified and directed.
Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal from site complete all as directed.
S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Refixing of 15mm steel tubing and including cleaning in positon (walls, ceiling and floor etc complete all as specified and directed.
S&F 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall as in waste/soil pipe complete all as specified and directed (Make : KISHAN/ SUPREME /PRINCE /ANANT /ORIPLAST)
S&F 75mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall as in waste/soil pipe complete all as specified and directed (Make : KISHAN/ SUPREME /PRINCE /ANANT /ORIPLAST)
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed.
M & L for non skid coloured ceramic tiles 7 to 8mm thick jointless (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for 75mm thick PCC M10 grade (Nominal mix) using 20mm graded crushed stone aggregate as in sub base complete all as specified and directed.
M&L 25mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in levelled course finish even and fair for tile finishes complete all as specified and directed.
M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick jointless set and joint in neat cement slury and pointed in white or colour cement to match over and including 10mm thick plaster in CM 1:4 as backing coat to receive tiles complete all as specified and directed.
S & F in repairs fancy type decorative Drapary rod of 20mm dia for window and doors with curtain rings and decorative doom holders fixed to wall with screw complete all as specified and directed.
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed.
M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed.
All as per item no 50 but except bricks complete all as specified and directed.
Demolition of reinforced cement concrete in roofs, floors (other than ground floors) complete all as specified and directed.
M & L TMT mild steel bars 6mm to 8 mm dia and over ,cut to length,bend to shape required, including cranking ,bending spirally for hooping for columns,hooking ends and binding with the including mild steel wire(annealed) not less than 0.9mm dia or securing with clips.complete all as specified and directed.
M&L for RCC M-15 grade (Nominal mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n exc 200mm thick (horizontal or sloping) rough finished surface of concrete complete all as specified and directed.
M&L for rendering 15mm thick on other than fair faces of brick work in cement mortar (1:4) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement complete all as specified & directed.(Using Dimapur Sand) [Note: WPC will be measured and paid separately)
Supply of Integral water proofing Compound ISI marked.
Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed.
M&L for 75mm thick PCC M-10 grade (Nominal mix) using 40mm graded stone aggregate as in plinth protection finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed
Demolition and breaking up drain pipes, internal dia of pipe 75mm to 110mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.
S&F in repair PVC (SWR) branch bends any radius 110mm bore of pipe complete all as specified and directed.
S&F in repair 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
S&F in repair 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
S&F in repair PVC (SWR) branch bends any radius 75mm bore of pipe complete all as specified and directed.
M&L in repair PVC (SWR) vent cowl of bore 110mm complete all as specified and directed.(Make : KISHAN/ SUPREME /PRINCE /ANANT /ORIPLAST)
S&F in repair GI spouts 40mm dia projecting at least 20 cm clear of the wall complete all as specified and directed.
Cutting chases, pinning in, making good to facings of brick walls where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed water conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
Taking up or down 20mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.
S&F GI tubing (ISI Marked) 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Refixing of 20mm steel tubing and including cleaning in positon (walls, ceiling and floor etc complete all as specified and directed.
S&F in repair Gun metal, globe or gate valves(ISI Marked), with iron wheel head, screwed both ends for 20mm bore iron pipe and fixed complete all as specified and directed.
M&L for preparation of surfaces plastered or unplastered old surface and Washing, rubbing down and stopping of distempered and painted surfaces on wall and applying one coat of white washing complete all as specified and directed.
Preparation of newly plastered surfaces of walls and applying two coats of cement base paint including necessary scaffolding complete all as specified and directed.
Preparation of old plastered surfaces of walls including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and applying one coats of cement base paint including necessary scaffolding complete all as specified and directed.
M&L for removal of existing finish and preparation of old plastered surface including necessary scaffolding and applying two coats of acrylic exterior paint over a coat of primer (brand apcolite Apex manufactured by Asian or Brand weather coat manufactured by Berger or equivalent as approved by GE) complete all as specified and directed.
M&L for preparation of old plastered surface on ceiling and applying one coat of white washing complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying three coats of white wash on wall complete all as specified and directed.
Disconnecting existing tanks,exc 250 & n exc 500 setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. (Cleaning repairing, etc. measured separately).
S & F in repairs water storage tank ISI marked of capacity 500 ltrs hoisted and fixed in position including ball brass valves of 20mm dia, high pressure with polythene float and fly nut complete, screwed for iron pipe of brass ferrule and fixed in 20mm bore GI tube etc complete all as specified and directed.
SUBHASH CHAND GUPTA
MAURYA CONSTRUCTIONS
M/S BIJOYA LAXMI ENTERPRISE
M/s Ritz Marketing
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .