SPECIAL REPAIRS/REPLACEMENT OF OH LINE TO UG CABLE AND CONNECTED ITEMS AT NLP MIL STN UNDER GE 872 EWS

Amount

Dismantling/ Taking down Cross Arms, Mild Steel Channel, Angle Section, Flat Iron, Mild Steel Rod, etc., complete all as specified and as directed.

Dismantling/ Taking down Insulator of any description, complete all as specified and as directed.

Dismantling/ Taking down ACSR Conductor including Line Spacers of OH Electric Lines from LT Electric Poles of any description, complete all as specified and as directed.

Dismantling/ Taking down GI Earth Wire, Cradles Guards of any size and shape at any Position from LT Electric Poles of any description, complete all as specified and as directed.

Dismantling Stay Assembly of any description, complete all as specified and as directed. NOTE : Unserviceable Stay Assembly will be dismantled at Ground Level and disturbed Ground will Made Good as directed for which Earth Works, Demolition Cement Concrete, etc. will not be Measured & Paid separately.

Excavating in Trenches, not exc. 1.50 Metre Wide and Depth not exc. 1.50 Metre for Taking out/up and Laying of Cable Line, etc, Forming Surfaces to required Foundation, etc. and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Levelling, Watering and Well Ramming in layers not exc. 25 Cm, in Soft/Loose Soil, complete all as specified and as directed.

Removing Excavated Materials (Soils) to a distance not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point, complete all as specified and as directed.

Drilling/Making Hole (Horizontally) under Roads/ Hardstanding/ Pavements, etc. by any means (as suitable) for passing GI Tubing 50mm to 100mm bore (dia), complete all as specified and as directed.

M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 10 Sqmm, 2 Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 10 Sqmm, 4 Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 16 Sqmm, 4 Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 70 Sqmm, 3½ Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 150 Sqmm, 3½ Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

M&L Sand Cushioning (Dry) in Trenches/Ducts for Protection of UG Cables (below, above and around the UG Cable laid) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. NOTE : For the purpose of Payment, Punned thickness of Sand Cushioning only will be Measured.

Supply & laying Sub-class ‘B’ Bricks of Size 230 x 115x 75 mm, Kiln burnt, for Covering to UG Cable as Protection, laid Flat, Transversally Width Equal to the Length of the Cable, complete all as specified and as directed.

M&L Galvanised Steel Tubing Pipe 50mm bore (dia), Light grade with Fittings as required/ordered at Sites, laid in Trenches or inserting in Horizontal boring, complete all as specified and as directed.

M&L Galvanised Steel Tubing Pipe 80mm bore (dia), Light grade with Fittings as required/ordered at Sites, laid in Trenches or inserting in Horizontal boring, complete all as specified and as directed.

M&L Galvanised Steel Tubing Pipe 100mm bore (dia), Light grade with Fittings as required/ordered at Sites, laid in Trenches or inserting in Horizontal boring, complete all as specified and as directed.

Supply, Installation & Commissioning LT Feeder Pillar Box, Factory Made (CPRI approved Manufacturer) made out of 3.15mm thick CRCA Sheet, Outdoor type, Dust Proof and Vermin Proof (IP-54) and Painted with Two Coats of Synethetic Enamel Paint over a Coat of Red Oxide Zinc Chrome Primer, suitable for 415 Volts, 3 Phase, 4-Wire System, 50 Hz Supply having Copper Bus-bars 200 Amp for Phase & Neutral, installed on Porcelain/ Epoxy Insulator, Platform mounted of size 600x500x450mm, Self moulded type and Mild Stee Angle Iron Frame 50x50x6.0mm, Front & Rear Opening with Double Shutters and Locking Arrangement with 50mm Lock, MAKE : HARISON/NAVTAL and grouting Legs in Cement Concrete 1:2:4 (20mm graded stone aggregate) including necessary Formwork, Earthwork, etc., Providng all Electric Connections and Testing, Comprising with and including the following Accessories, complete all as specified and as directed:- INCOMING :- (a) MCCB 63 Amp, 4 Pole, 16 kA, 415 Volt, Fixed Thermal & - 01 No. Fixed Magnetic (b) Digital Amp Meter 0-400 Amp, Square Flush pattern - 01 No. (c) Digital Volt Meter 0-500 Volt, Square Flush pattern - 01 No. (d) Indicating Lamp LED type in Incomming Phase - 01 Set (e) Internal Wiring with PVC insulated Copper Conductor Multi-stranded Cable 1100 Volt grade IS-694 marked of appropriate gauge including Copper Lugs (f) Connection from MCCB to Bus-bars with Solid Copper Conductor (g) MCCB shall be provided with suitable Spreader of Copper Conductor for fixing of Incomming Cable OUTGOING:- For 07 No. Outgoing Cables

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.3mm thick burried directly in Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected with and including Galvanised Earth Strip of size 32x6.0mm by means of Bolts, Nuts, Check nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar with GI 40mm bore (dia) light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore (dia) medium grade including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing, complete all as per specified and as directed. NOTE : All Joints should be joined by Exothermic Welding or Brazing.

M/S KESHAVECONSTRUCTIONS