Shifting of 11 KV Electrical systems due to construction of elevated flyover to interconnect Lucknow airport with Shaheed path and other related works.

Amount

Safe loading & carriage including unloading & proper stacking of following store materials from ESC Daliganj/JE store to site of work.

11KV 3x185 sq mm XLPE cable

11 KV ST/Th C/J kit 3x185 sq mm

11KV End termination O/Door 3x185 sq mm

MS earthing rod 20x2500 mm

Stay Set Complete 16x1800 mm

Stay Wire 7/10 swg

Laying of 11 KV XLPE Cable 3x185 sqmm double circuit in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. the two cables should be seprated by a partition of single bricks (All the material required for laying will be supplied by the contractor except 11 KV XLPE cable)

Cable laying By drill method Single circuit

Cable laying By drill method Single circuit in HDPE Pipe 120 mm dia (All the material required for laying will be supplied by the contractor except 11 KV XLPE cable)

Painting of Existing ST pole with two coat of Red oxide paint, PO red paint at top of pole 2 mtr and balance by two coats of best quality aluminium paint ISI of Berger/Nerolac/Asian paints as per norms.

Hoisting of 11KV XLPE cable on double pole with MS/GI pipe of size 4/6" dia 3 M long including its jumpering complete with clamps, nuts and bolts(all material arranged by contractor).

Making Heat & shrinkables joints of 11 KV 3x185 sqmm XLPE cable by Heat and shrinkables jointing kits Outdoor (Jointing kit O/D will be provided by deptt. )

Digging of pit of size 3x2x1 mtr. for making straight through joint 11 KV work included filling of soil leveling and ramming of the same .( S/Th Provided by department)

Plotting of cable layout rute on graph paper (i.e. depth underneath and distance from either side from prominent reference fixed point ) the reference point must not be more than 100 mtr.

Earthing of ST pole with MS-Earthing Rod 20x2500 mm, Earth wire with nut and bolt as per RESSPO norms (All materials shall be provided by contractor except MS-Earthing Rod).

High Pressure Testing

Erection of stay set 16x1800 mm by digging of pit of size 0.4x0.6x1.6 m including groutin, nuzzling & fixing of stay insulator with stay wire of size 7/10 swg ( All material arranged by contractor except stay set and stay wire.

Dismantaling of 11 KV existing O/H line with shearing of pole & taking down of existing ACSR Dog/Racoon/Weasal Conductor and rolling back of conductor

Dragging, loading and carriage with unloading of dismantled materials as scraps from site to Lesa Store/JE Store.

SINGH ENTERPRISES