Shifting of Electrical Utilities Coming under the road widening near Cement kadal Qamarwari falling under the jurisdiction of ESD Watalkadal, ED 3rd (Turnkey Basis)

Amount

Shifting of Electrical Utilities Coming under the road widening near Cement kadal Qamarwari falling under the jurisdiction of ESD Watalkadal, ED 3rd (Turnkey Basis)

Supply, installation, testing and commissioning including transportation, loading and unloading of Gapless Surge Arrestor, 9 KV, 10 KA, Lighting Arrestor Set Heavy duty with Polymer Housing, Station type conforming to IEC-99-4 Capable of withstanding Maximum continuous operating voltages (M.C.O.V)

Supply, installation, testing and commissioning including transportation, loading and unloading of 11KV 200 Amperes, Triple pole switches Gang Operated (G.O. Set) conforming: IS-2544, IS: 5340 (Part-III) and SS: 9921 (Part-I -V

Supply, installation, testing and commissioning including transportation, loading and unloading of 11 KV Horn, Gap (fuse 3-phase 200A) as per Relevant IS.

Supply, installation, testing and commissioning including transportation, loading and unloading of 300mm² Single Core Cable,1.1kV Grade, Armoured, XLPE Insulated Stranded Conductor FRLS type for 250 KVA DT along with Lugs/thimbles/clamps

Supply, installation, testing and commissioning including transportation, loading and unloading of 400mm² (2Ckt) Single Phase Cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type along with Lugs/thimbles/clamps

Supply, Installation, Testing & Commissioning including Transportation, loading Unloading, digging/excavation up 1.5 meter deep for planting of S.T. poles 11 Meter long swaged Type conforming to ST 410 SP-56, IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300 mm above the planting depth which should be 1.5ms (SP 56). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply, Installation, Testing & Commissioning including Transportation, loading Unloading, digging/excavation up 1.5 meter deep for planting of S.T. poles 9.0 Meter long swaged Type conforming to ST 410 SP-33, IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300 mm above the planting depth which should be 1.5ms (SP 33). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply, Installation, Testing & Commissioning including Transportation, loading Unloading, digging/excavation up 1.5 meter deep for planting of S.T. poles 8.0 Meter long swaged Type conforming to ST 410 SP-15, IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300 mm above the planting depth which should be 1.5ms (SP 15). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply, fabrication and fixing including Transportation, loading Unloading of 11 KV Polymeric composite Disc Insulator 12kV,min failing load 45KN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Supply, fabrication and fixing including Transportation, loading Unloading of 1. GI Channel/Angle/Flat of sizes including clamps for L.A set/G.O set/Horn Gap for 630 KVA substation=150 Kg 2. G.I Channel Bedding for transformer (300Kg) icluding Angle Braces, Clamps/Collars for 630 KVA - 300 Kg & for 250 KVA - 300 Kg 3. HT Network

Supply and fixing of GI Nuts and Bolts full thread of sizes Galvanized as per IS (for Substation, HT Network, LT Network.

Supply, laying, testing and commissioning of Earthing of Substation-Excavation of earth pit of dia 650mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as per IS 1239. GI strip for neutral earthing of size 25mm*3mm for connection of transformer body, G.O Set & lightening Arrestor (Including Baby Insulators, if required) as per IS 2629/85, GI nuts & bolts, refilled with earth enhancement materials & earth chamber made of brick masonry with RCC slab cover.

Supply, Installation, Testing and Commissioning including Transportation, loading Unloading of 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lightening Impulse 75 KV Positive and 80 KV Negative, creepage distance 320mm

Supply and fixing of wedge Connector/PG Clamps

Supply and fixing of Danger Plate With Clamps as per Standards wih writing in English & Urdu.

Supply, Installation, fabrication, Testing and Commissioning of LT Distribution Box for 250 kVA DTR with TPN MCCB for incomer & SFU's for Outgoing Circuits

Supply, Installation, fabrication, Testing and Commissioning of LT Distribution Box for 630 kVA DTR with TPN MCCB for incomer & SFU's for Outgoing Circuits

Supply, Installation, Laying, Testing & Commissioning including Transportation, loading Unloading of 100 mm² ACSR Conductor

Supply and Painting of poles with Single coat Red oxide Primer and two coats of Aluminium Paint Aluminium Paint

Providing of material & Laying of Cement bottoming 1:2:4 mix as per REC standards 0.6 cum/pole

Providing of material & Laying of Cement bottoming 1:2:4 mix as per REC standards 0.5 cum/pole

Providing of material & Laying of Cement bottoming 1:2:4 mix as per REC standards 0.45 cum/pole

Earth work in excavation by manual means in trenches for foundations of 630 KVA, 11/0.433kV, 3-phase Distribution Transformers

Providing and laying in position cement concrete of specified grade including curing including the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size): Transformer Bed including cement bottoming of Poles for 630 KVA Substation

Supply and fixing of Anti-Climbing Device with Clamps for Substation & HT Network Poles

Supply and fixing of PG Clamps for 100 mm² ACSR Conductor

Suppply, Laying, Testing and Commissioning of Pole Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Supply and Fixing of GI Wire 6 SWG & 8 SWG

Supply and fixing of 16 KN Polymer Shackle Insulators along with GI U-Clamps

Dismantling of 630 KVA, 11/0.433kV, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, (Copper wound ), and with LV Cable Box having detachable Aluminium Gland plate and Re-erection of same at new site including Transportation, loading and unloading from Present site to new site

Dismantling of 250 KVA, 11/0.433kV, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level-2, (Copper wound ), and with LV Cable Box having detachable Aluminium Gland plate and Reerection of same at new site including Transportation, loading and unloading from Present site to new site

Dismantling of 9 mtr Poles including allied accessories and transportation to Divisional Stores including unloading/loading/carriage. The job including dismantling of cement Bottoming.

Dismantling of 8 mtr Poles including allied accessories and transportation to Divisional Stores including unloading/loading/carriage. The job including dismantling of cement Bottoming.

Dismantling of 100 sqmm ACSR Conductor and transportation to Divisional Stores including unloading/loading/carriage

M/S YATOO ELECTRICALS