PROVN OF COVERED PATHWAYS FROM MAIN ROAD TO STAGE-I AT AIR FORCE STN AT NATHATOP UNDER GE (AF) UDHAMPUR.

Amount

Excavating in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation etc and n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in hard /dense soil, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete,complete all as specified and directed.

M&L for Brick work with sub-class 'B' bricks designation 75 old size, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Returning, filling incl spreading leveling watering and well ramming in layers not exceeding 25 cm in hard and dense soil complete all as specified and directed.

Removing surplus soil to a distance n.exc 50m and deposited where directed at a level not exceeding 1.50 m above the starting point complete all as specified and directed.

M&L RCC M-30 design Mix (using 20 mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed by Engr-in-Charge.

M&L RCC M-30 design Mix (using 20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts all as specified and directed by Engr-in-Charge.

M&L PCC 1:2:4 type B1(20mm graded aggregate ) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs etc complete all as specified and directed by Engr-in-charge.

M&L RCC M-30 design Mix ( using 20 mm graded crushed stone aggregate) as in beams , gable beam, cantilever bressumer lintles over 1.5 m span and the like, complete all as specified and directed by Engr-in-charge.

Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engr-in-charge.

Formwork to flat sides of columns and stanchions complete as per specified and directed.

Formwork to flat sides and soffits of or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams,complete as per specified and directed.

M&L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete as per specified and directed.

All as per srl item No. 13 above but 5mm dia and over including 10mm dia in stirrups, spacers and binders etc complete as per specified and directed.

M&L for 15 mm thick rendering in two layers (10mm + 5mm) on fair faces of brick/concrete or stone surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete with water proofing compound (WPC shall be measured separtely) , complete as per specified and directed.

Supply only Liquid water proofing compound complete as per specified and directed.

M&L for 10 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete as per specified and directed.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash, complete as per specified and directed.

M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of primer in camouflage pattern approved complete as per specified and directed..

M&L Hard core of broken stones or boulders of gauge n exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick incl watering and rolled to true surface complete as per specified and directed.

M&L 100 mm thick cement concrete (1:4:8) type D-2 as in sub base to floor complete as per specified and directed.

M&L for 40mm thick sand (cushioning) filling under floors including watering and consolidation complete as per specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 50 mm thickness, M-30 Grade with grey cement and pigment complete as per specified and directed.

S&F mild steel Framed work as in door or gates of angle or other section with gusset plates, rails, braces etc, complete drilled for fixing of steel sheeting or other covering, door etc to prepared for hanging or sliding with and including either hooks and hinges or steel hanging doors fitting and hanging, MS handle & sliding door bolt, also fastening and fixing confirming to Fe- 410-W (Grade E-250) quality-A, complete as per specified and directed.

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete as per specified and directed.

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 quality 'A 'ccomplete as per specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance Pieces, cleats etc Fe 410 - (Gde- E- 250) quality- A complete as per specified and directed.

S&F Plain black mild steel sheeting 1.25mm thick in steel gate and straight flashing surface, complete as per specified and directed.

S&F Pre- Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screw or L type or J type hook , complete as per specified and directed.

S&F Pre- Painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screw or L type or J type hook , complete as per specified and directed.

Surface dressing n.exc 15 cm deep in hard /dense soil complete as per specified and directed.

Excavating in trenches, n exc 1.5 m wide or not exc 10 Sqm on plan and n exc 1.5 m in depth for foundation and getting out hard rock, complete all as specified and as directed.

Removing of rock to distance n exc 50mtr and deposited where directed at a level not exceeding 1.50 m above the starting point complete as per specified and directed.

Material and labour for cement concrete 1:2:4 type B-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling mass concrete complete as per specified and directed.

Use and waste of form work to the side of PCC steps including fair finish surfaces complete as per specified and directed.

Material and labour for 75 mm thick plain cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate ) as in flooring / plinth protection laid in alternative bays and joints shall be filled up with bituminous gola with 80/25 bitumen ( 1 part of bitumen to be mixed with 3 part of sand ) including finish the surface even and smooth complete all as specified and as directed.

Supply and fixing plates ( plain or chequered) as per IS-3502 ( Base IS-10748 Gr-II ) square or rectangular cut or notched ( ordinary and counter shunk ) forming holes , without any attachment complete all as specified and as directed .

Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut of 11 to 15 mm dia and exceeding 15 cm and n.exceeding 22.5 cm long complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete, all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of new steel surface n.exc 10 cm width or girth complete all as specified and as directed .

M&L for small articles such as clamp , hold fast , wall ties /wind ties , support of valley gutters , support or stays for rain water , ventilating pipes , including bolts if required etc made of MS flat iron conforming to Fe-290 W (Gde E-165), complete all as specified and as directed .

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in fixing of hold fast complete all as specified and as directed .

Supply only 25 mm thick pre-formed filler board for expansion joint, complete all as specified and as directed.

M&L for point wiring for One light/Fan/Exhaust fan point controlled by one switch complete with PVC insulated and unsheathed cable 1.5 sqmm (nominal area) ISI marked multi-stranded copper conductor single core including ISI marked 20mm dia 'medium grade' PVC conduit for point wiring concealed in wall/false ceiling with pressed steel concealed Sunken boxes not less than 1.6mm thick of reqd size (factory painted) and with top cover 3 mm thick of Hylam sheets of required colour, painting Sunken boxes inside and out side with one coat of red oxide primer complete including 1.5 sqmm PVC insulated and unsheathed ISI marked copper cable to common earth connected to earth dolly colour coding of cable as per IE Rule complete all as specified & directed.

All as per above Srl Item No. 45 One 5 pin 5 Amp switch socket out let point on an independent board

M&L for point wiring complete with PVC insulated and unsheathed cable 2.5 sqmm (nominal area) ISI marked multi-stranded copper conductor single core including ISI marked 20mm dia 'medium grade' PVC conduit for point wiring in concealed in wall/false ceiling with pressed steel concealed Sunken boxes not less than 1.6mm thick of reqd size (factory painted) and with top cover 3 mm thick of Hylam sheets of required colour, painting Sunken boxes inside and out side with one coat of red oxide primer complete including 2.5 sqmm PVC insulated and unsheathed ISI marked copper cable to common earth connected to earth dolly colour coding of cable as per IE Rule complete all as specified & directed.

S&F switch piano, flush type, 5 amps single pole, one way, complete all as specified and as directed.

S&F Switch socket combination 2 in1 3pin 6 Amps flush type universal complete all as specified and as directed.

S&FSwitch socket combination 2 in1 3 pin 6 and 16Amps flush type universal Complete all as specified and as directed.

Material and labour for surface/wall mounted LED Batten luminaire with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver of capacity LED 20 watt complete all as specifeied and as directed..

M&L for ceiling rose surface bakelite, 3 terminals complete all as specified and as directed.

S&F Vertical three phase distribution board, TPN, 4 way 440 volts having IP-54 , double door with provision for fixing of MCCBs as incomer 125Amps and MCBs as outgoing complete main switch, busbar, GI box including accessories therein & disposing from site complete all as specified and as directed.

S&F MCCB three pole 415 Volts 50 Hz 125 Amps rating with rupturing capacity not less than 36 kA, Ics = 100% Icu, adjustable thermal & adjustable megnetic settings with spreader links, copper reducer etc including accessories therein & disposing from site complete all as specified and as directed.

M&L for MCB single TPN 240 Volts 63 Amps complete all as specified and as directed with rupturing capacity 10 KA, complete all as specified and as directed.

S&F sheet metal enclosure factory made double door For DB 240 Volts with 200 Amps rated bus bar SPN 8 Way and making good disturbed surface of walls complete all as specified and as directed.

S&F of sheet metal enclosures double door for DBs SPN 04 way 240 Volt with 200 Amps rated Busbar including accessories therein and disposing off complete all as specified and directed.

S&F MCB SPN 63 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed.

S&F MCB SP 6-32 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed.

M&L of sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 2.5.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 2.5.00 sqmm (nominal area) 1100 volts grade cable as earth wire,including suitable size of steel conduit drawn through concealed conduit and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. Note: Two runs each of one RM of 2.5.00 sqmm main cable and one RM of 2.5.00 sqmm cable earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

Supply and fixing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, of size 95 sqmm 3.5 core laid in trenches or passing through pips/ ducts complete all as specified and directed by Engineer in charge

Excavation in trenches in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation / laying of pipes and getting out, complete all as specified and as directed.

Returing filling in any type of soil including spreading levelling watering and well ramming in layers not exceeding 25cm, complete all as specified and as directed.

Removing excavated material (soils) not exceeding 50mtr and deposting where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and as directed.

M&L for Common burnt sub class ‘B’ brick laid flat in trenches over and across the length of cable with length of brick perpendicular to the direction of cable adjacent/abutting each other complete all as specified and directed for cable protection, complete all as specified and as directed.

Sand cushioning for before laying the cable and then after laying the cable 15cm width of trenches for protection of cables including punning down, complete all as specified and as directed.

GI tube light grade of size 80mm with all fittings and fixed complete to wall/poles or laid in floor for cable crossing including cutting of bitumen roads/PCC and making good after laying of cable complete all as specified & directed by Engineer-in-charge.

M&L for Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-22 (9.0 metres ), complete all as specified and as directed.

Supply and fixing LED street light fitting 70 Watt 230 V AC utdoor type with high pressure diecast aluminum hosing and heat resistantcomplete with driver, lamp suitable size bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection & two wire conection as per suitable fitting complete all as specified and as directed.

Supply and fixing of XLPE insulated amoured heavy duty electic cables with aluminium conductor 1100 volts grade cross sectional area 16sqmm 4 core, complete all as specified and as directed.

Supply and fixing of laying pipe, GI light grade 40mm bore fixed on walts or laid floor complete with all accessories all as specified and directed by Engineer in Charge

M&L for Earthing complete with galvanised steel earth plate electrode of size 600x600x6mm thick as earth electrode burried directly in ground (earth pit not less than 2.25 Meter deep below ground level) with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4 mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers incl jointing of earth electrode and earth wire by means of welding,all as directed including providing earth wire protection pipe GI light grade20mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and pit cover made of MS sheet 4 mm thick duly fixed to angle iron frame with hinges of appropriate size by welding and having locking arrangement, adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil , removing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 directed by Engineer-in-charge .

M&L inreplacement of LT panel Out door type cubical floor mounted type made out 3.15mm thick CRCA Sheet IP 65 duly powder coated complete bus bar 250 Amps rating made of Aluminium strip duly drilled holes for connections and mounted on epoxy based post insulators for 3 phase 4 Wire 415 volts 50HZ Power suply system suitable for and including the following (a) MCCB 415 Volts 200Amps 4 Pole with Reputing CAP 36KA Microprocessar based for over load short circuit protation : 01 Nos incoming (b) MCCB 415 Volts 100 Amps 4 Pole with Reputing CAP 36KA Microprocessar based for over load short circuit protation : 01 Nos (c)MCCB 415 Volts 63 Amps 4 Pole with Reputing CAP 36KA Microprocessar based for over load short circuit protation : 01 Nos (d) All acessories prewired with suitable size copper conductor cable/strip and suitable foundation as per manufactors remcomendation (e) Indicator set RYB 01 Set 03 psc Led type

M&L of sheet metal enclosures double door for DBs SPN 12 way 240 Volt with 200 Amps rated Busbar including accessories therein and disposing off, complete all as specified and directed.

M&L for earth continuity conductor or main earthing lead fixed to wall on battenor recess or chases or buried in ground or drawn in conduit/pipe orfixed to poles or any other indicated situation for loop earthing etc as required 4mm dia galvanised iron or steel wire, complete all as specified and as directed.

MAHADEV ENTERPRISES (BID ID -3243174)

vijay builders (BID ID -3246064)

bamral builder (BID ID -3251915)