PROVN OF SOAKAGE WELL AND SEPTIC TANK WITH RELATED WORKS AND SPL REPAIR TO CERTAIN BLDGS COOK HOUSE AND OR LINE AT MIL STN BIKANER UNDER GE N BIKANER

Amount

Dismantling of existing false ceiling of any type of insulated board complete all as specified and as directed by Engineer-in-Charge.

Dismantling Asbestos cement Corrugated sheets in roof covering including ridges complete all as specified and as directed by Engineer-in-Charge.

Dismantling timber scantling 40 sq cm and over in section, in any position complete but unframed structure complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster on brick or conc surfaces including racking out joints hacking for key, scrubbing down with water complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete in ground floor and pavings n.exc 15cm thick (below or above ground level) including tiles and similar works complete all as specified.

Demolition of lime Concrete to any thickness in any position incl all topping thickness (below or above ground level) complete all as specified and as directed by Engineer-in-Charge.

Demolition of brick masonry built in CM. all as specified and the item credited from the demolilition is used to filling the manhole area and levelled to the surrounding area complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhat or frames exc 1.50 Sqm n.exc 4 Sqm (without taking down shutters from the frames) complete all as specified and as directed by Engineer-in-Charge.

Ditto all as per item no -08 above but n.exc 1.50 Sqm complete all as specified and as directed by Engineer-in-Charge.

Taking down door shutter of any desc exc 1 sqm but not exc 2 sqm and refixing in the same opening complete all as specified and as directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.

Dismantling structural steel work as in trusses nexc 10.00 mtr span complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing 15 mm bore with connections for cleaning for refixing or removing to store yard complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing 20 mm bore with connections for cleaning for refixing or removing to store yard complete all as specified and as directed by Engineer-in-Charge.

Dismantling water tanks and removing to store 500 ltrs complete all as specified and as directed by Engineer-in-Charge.

Dismantling cast iron /PVC pipes fixed to walls or laid in trenches in any position of dia 100 mm complete all as specified and as directed by Engineer-in-Charge.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radious built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L half brick work with fly Ash bricks straight or curved on plan to any radius built in CM 1:4 using old size bricks complete all as specified and as directed by Engineer-in-Charge..

M&L Jodhpur stone of roof slabs, self faced 7.5 cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L Jodhpur stone for lintels, beams and roofs, self faced, 7.5 to 10cm thick complete all as specified and as directed by Engineer-in-Charge.

M&L for 50mm thick PCC type B-1, 1:2:4 (20mm graded aggregate) crushed stone aggregate as in stone roof slab as levelling course complete all as specified

Raking out of cement or cement lime mortar to stone slab as in roof stone patti or precast concrete slab floor, any description, laid flat complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone agg. ,50mm thick as in floors over stone patti roof slab finished the surface even and fair comp.all as specified.

Supply only liquid water proofing compound complete all as specified.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg/sqm incl cleaning surface complete all as specified and directed.

S&F APP based polymeric membrance min weighing 3kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric land on primed surface by force application complete all as specified.

M&L for Lime concrete terracing as specified on roof (excluding bitumen tack coat) complete all as specified and as directed by Engineer-in-Charge.

M&L for 40 mm thick Brick tiles bedded in 15 mm thick cement and sand mortar (1:6) and joints grouted flush in cement and sand mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and as directed by Engineer-in-Charge.

M&L for flush point in cement motor 1:4 over stone patti in paving complete all as specified and as directed by Engineer-in-Charge.

M&L steel work in tubular trussess/ purlins incl spl shaped washer etc. using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240. complete all as specified and directed by Engineer-In-Charge.

M&L framed brackets of angles or tees with web and flanges cut to shape, drilled and countershunk for screw, including bending , Grills tank staging and welding angles, as necessary, guser plate, riveting, etc. n exc. 10 kg brackets, confirming to Fe. 290 Gde -E-165 (Brackets over 10 kg each to be measured under structural steel ) complete all as specified and as directed by Engineer-In-Charge.

S&F Mild steel bolts.exc. 5 cm length not exc. 10 cm length (machine made) with hexagonal or square heads at one end and screwed the other , or screwed both ends, each screwed end to be fittied with washers and one hexagonal or square nut 11 to 15 mm neck dia complete all as specified and as directed by engineer-in-charge.

Erection and fixing only steel work in roof trusses including special shape washers complete all as specified and as directed by Engineer-in-Charge.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel Sheet high rib profile tile pattern color coated 0.5 mm thick of 550 Mpa Tensile strength sheets as in roof covering and fixed as per manufacturers instruction (design as app by Engg in charge complete all as spfd )

M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for 15mm thick rendering on fair faces of brick surfaces finished even and smooth W/O using extra cement in cm 1:4 complete all as specified and as directed by Engineer-in-Charge.

M&L for 10mm thick rendering on brick or concrete surfaces in cm 1:6 finished even and smooth w/o using extra cement complete all as specified and as directed by Engineer-in-Charge.

S&F Composite cement ceiling board 4 mm thick in ( 595 mmX595 mm ) pannel (Make-everest ramco or eql.) designer ceiling pre finished conforming to IS 14862 type B cateogory three incl GI frame , grid work,hold fast,suspended with suspender along with holding down bolt complete . (Note: Ceiling board shall confirming to IS-14862 ,shall be fire resistant , Moisture resistant and ceiling shall be suspended with suspenter and adjuster .)

M&L for providing 75 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in bays n exc 2.5 m finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

M&L for Providing PCC 1:4:8 as in sub base/mass concrete type D-2 using 40mm graded stone agg complete all as specified and as directed .

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and smooth without using extra cement complete all as specified.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 laying floor finishes complete all as specified and as directed by Engineer-in-Charge.

M&L for Non-skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade (double charged) complete all as specified and directed by Engineer-in-Charge (tiles shall be approved by Engineer-in-Charge)

M&L for Non-skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade (double charged) complete all as specified and directed by Engineer-in-Charge (tiles shall be approved by Engineer-in-Charge)

S&F 20-25 mm Thick single piece machine cut kota stone slab in flooring laid and jointed with gry cement slurry Mixed with pigment to match the shade of the slab incl rubbing and mirror polishing complete incl roughing the surface all as spd in SSR pt I Para 13.47.4 and as directed by Engineer-in-charge.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with mirror finish complete all as specified in SSR pt I Para 13.47.4 and as directed by Engineer-in-Charge.

M&L for 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles on vetical surface mplete all as specified.

M&L for glazed coloured ceramic tiles in dado/vertical surface (350mm x250mm x 7 mm/450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

M&L for Non skid coloured tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types as in platform Complete all as specified and directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specification and as per approved by engineer in charge.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing of 100 mm But hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified.

S&F steel locking bolts with mils steel electrogalvanised plate and bright bolt ont less than 10 mm dia and 100 mm size, complete all as specified .

S&F for 150mm size aluminium anodised barrel tower bolt of extruded section and fixed.all as specified and directed.

S&F for 150mm size aluminium anodised handle of febricated type and fixed.all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified

M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast lintels upto 1.5 m clear span, cills, steps complete all as specified.

S&F 35mm thick Factorymade second class hard wood plain framed pannelled shutter (two panels and double shutter) with lock rail and pannel or 9mm BWP comerical ply or 12mm venered particle board with comerical face veneering on both faces. The size of rail and style as per IS-1003 part I kilin seasoned

S&F 2nd class hardwood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass guage, etc. (without sash bars), edges of framing plain, chamfered or rounded. Fitted with cut and mitred beads for securing glass,etc. sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24(a); supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-charge.

S&F mild steel barrel tower bolt, stove enamelled black with bright bolt of 150 mm complete all as specified and as directed by engineer-in-charge.

S&F mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12 mm dia with and incl. a minimum of 6 bolts and nuts four on bolt plate and two on staple plate of 300 mm long complete all as specified and as directed by Engineer-In-Charge.

S&F MS pressed handle oval type stove enamel block with bright bolt of 150 mm complete all as specified and as directed by engineer-in-charge.

S&F 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by engineer-in-charge.

S&F in repair 20 mm dia mild steel curtain rod chromium plated incl brackets, stops etc. complete all as specified.

S&F powder coated aluminum door window frames/shutter ,other sections for doors , windows , ventilatorswith one or more rebates , channel for sliding shutters , grills etc including jointing cleats for fixing etc , complete all as specified. .

S & F in repair aluminium glazing clip with rubber gasket of suitable size and thickness as required at site for fixing glass in aluminium door/windows complete all as specified and directed by Engineer-in-Charge.

S&F in repair sheet glass 5.5 mm thick ordinary quality & glazing with rubber gasket in squares exc 0.5sqm in each pane as in aluminium door/window complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium anodised barrel tower bolt of extruded section of 150mm complete all as specified and as directed by engineer-in-charge.

S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 100 mm complete all as specified and as directed by engineer-in-charge.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S & F Aluminium handles cast type anodised of 150mm complete all as specified and as directed by engineer-in-charge.

Material and labour for 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by engineer-in-charge.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor overall length of cover plate 150 mm complete

S&F factory made mild steel Window box type with side huge shutters incl pintol hinges,steel handles, steel peg stay and all locking arrangement and one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEBTZ/TD/888R & 889 ii) MS fillets, glazing, wire gauge shall be measured and paid separately iii) opening incl provn shutter for cooler to be provided

S&F factory made mild steel Ventilator box type with upper top hung shutters and bottom fixed type shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEBTZ/TD/888R & 889 ii) MS fillets, glazing, wire gauge shall be measured and paid separately

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each pane all as specified

S&F 3 mm thick Frosted glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each pane all as specified

M&L Galvanised stain less steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks, or galvanised wire staples.

Ditto all as per item no 81 above but fixed as in repairs .

S&F in repair stainless steel peg set of 6 peg foldable or fixed complete all as specified & directed by Engineer-in-charge

S/F Cast Iron Pipe (Sand Cast) for waste and vent pipe with or without ears, with cement joints fixed to walls, 50mm dia complete all as specified and as directed by engineer-in-charge.

S&F Cast Iron Pipe (Sand Cast) for waste and vent pipe with or without ears, with cement joints 100mm dia laid in trenches complete all as specified and as directed by engineer-in-charge.

S&F cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints fixed to wall all as specified.

S&F Cast Iron Pipe (Sand Cast) for waste and vent pipe with or without ears, with cement joints 75 mm dia laid in trenches complete all as specified and as directed by engineer-in-charge.

S&F cast iron soil, waste and vent pipes (sand cast) 75mm bore in any length with or without ears with cement joints fixed to wall all as specified.

S&F CI floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 1:2:4, 75mm dia complete all as specified and as directed by engineer-in-charge.

S&F CI bends (any radius), disminishing pieces or tappers(larger bore measures), 100mm dia with oval access door complete all as specified and as directed by engineer-in-charge.

S&F CI bends (any radius), disminishing pieces or tappers(larger bore measures), 75mm dia with oval access door complete all as specified and as directed by engineer-in-charge.

M&L for Extra over cast iron pipe and fittings if lead joint is provided in lieu of cement joint for 75 mm bore complete all as specified and as directed by engineer-in-charge.

M&L for Extra over cast iron pipe and fittings if lead joint is provided in lieu of cement joint for 100 mm bore complete all as specified and as directed by engineer-in-charge.

S&F CI branch pieces Single (equal or unequal ) ordinary or inverted (spigot or socket type) or with parallel branches 100 mm dia complete all as specified and as directed by engineer-in-charge.

S&F cast iron Branch pieces, single (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches/ Junction box 75 mm bore fixed in repair with oval access door complete all as specified and as directed by engineer-in-charge.

S&F CI cowls , 50mm dia complete all as specified and as directed by engineer-in-charge.

S&F Stack clamp out of 50mm x5mm flat iron stays and 16 mm dia round iron stays, including bolt and nuts and securing ends of stays to walls or roof for 50mm bore piece complete all as specified and as directed by engineer-in-charge.

S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to walls for 75mm bore pipe complete all as specified and as directed by engineer-in-charge.

S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to walls for 100mm bore pipe complete all as specified and as directed by engineer-in-charge.

S&F Steel water tubing 15mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows , tees, short pieces, connectors, back nuts, diminis complete all as specified and as directed by engineer-in-charge.

M&L 20 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and ceilingsor laid under floors etc complete all as specified.

S&F 500 ltr capacity Rotational moulded polyethylene water storage tanks three layer (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, 500 ltr Capacity, including Ball brass valves, high pressure, with polythene float and flynut complete all as specified and as directed by engineer-in-charge.

S&F 1000 ltr Rotational moulded polyethylene water storage tanks three layer(Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, 1000 ltr Capacity, including Ball brass valves, high pressure, with polythene float and flynut com

S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe complete all as specified and as directed by engineer-in-charge. fixed

S&F in repairs Vitereous china wash down water closet pan (Pedestal pattern) white including trap bolts etc complete including connections to drain and seat cover and anti siphonage pipe complete all as specified and as directed by engineer-in-charge.

S&F Vitreous China Squatting pan `Orissa pattern` size 580x440mm including integral foot rest, incl P or S trap comp all as specified and fixed in repairs. complete all as specified and as directed by engineer-in-charge.

S & F in repair Viterous China urinal half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; white including CP spreader, waste pipe etc.

S&F in repair chromium plated long body Bib Tap, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule, fancy type, CP, 15mm dia complete all as specified and as directed by engineer-in-charge.

S&F in PVC valveless, symphonic action type flushing cistern 10 Ltr ,low level, white with inlet, ball valve float and handle,complete including connection to pipe all as specified.

S&F in repairs health faucet with 1 mtr long tube and hook and knob al as specified and directed by Engineer-In-Charge. Cat Part No BEA 40 of Prayag/jainko/sakti or Equivalent

S&F Towel rail of cast copper alloy chromium plated standered size fixed in repair as approved by Eng-in-Charge.

S&F in repair chromium plated soap dish Make Jaquar/ cera or eqivalent approximate size 160x160x90 mm complete all as specified and as directed by engineer-in-charge.

S&F Bib Tap, cast copper alloy with crutch or butterfly handle chromium plated screwed down screwed for iron pipe or brass ferrule, fancy type, CP, 15mm dia complete all as specified and as directed by engineer-in-charge.

S&F in repair 15 mm bore Brass centre hole basin CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed by engineer-in-charge.

S&F in repair 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed to wall complete all as specified and as directed by engineer-in-charge.

S&F kitchen sinks with drainage board made of stainless steel 1mm thick with plugs, washers and waste, pie cast iron cantilever brackets and conneting union to pipe overall size 915mm x 460mm bowl size 410 x 330 x 160mm complete all as specified and as directed by engineer-in-charge.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including brackets & waste pipe etc complete all as specified.

S&Fin repair 15mm bore PVC connection with PTMT nuts length 450 mm complete all as specified and as directed by engineer-in-charge.

S&F in repair fancy type chromium plated stop valve/Angle valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions chromium plated of size 15 mm. all as specified

S&F in repair Brass chromium plated shower rose 125 mm size with and incl shower arm complete all as specified and as directed by engineer-in-charge.

S&F in repair 15 mm bore brass fancy concealed type stop valve chromium plated with long shank and cup complete screwed for iron pipe complete all as specified and as directed by engineer-in-charge.

S&F in repair 32 mm size cp waste coupling of PTMT(half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) incl waste pipe complete all as specified and as directed by engineer-in-charge.

S&F PVC gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed by engineer-in-charge.

M&L for prep of new plastered and unplastered surfaces of walls by applying a upto 3 mm thick thin layer of Birla white putty to give uniform surface applying two coat of oil bound distamper on walls surfaces of desired finish as app by Eng-in-charge in any position

M&L Complete removal of existing treatment of walls and applying two coats of oil bound distemper over a layer upto 3 mm of wall care putty complete all as specified and as directed by Engineer-in-Charge.

M&L two coats of Acrylic smooth exterior weather coat paint on walls including preparation on new surfaces complete all as specified and directed.

M&L two coats of Acrylic smooth exterior weather coat paint on walls including preparation (complete removal of existing treatment) on old surfaces complete all as specified and directed. .

M&L for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of primer all as specified.

Ditto all as per item no 129 above but one coat on old decorated surfaces complete all as specified and as directed by engineer-in-charge.

M&L for three coats of white wash on walls old plastered surfaces complete all as specified and as directed by engineer-in-charge.

M&L for three coats of white wash on walls new plastered surfaces complete all as specified and as directed by engineer-in-charge.

M&L for applying two coats of white washing on ceiling including preparation of old plastered surfaces complete all as specified.

M&L for applying two coats of white washing on ceiling including preparation of new plastered surfaces complete all as specified.

M&L two coats of cement cement base paint on walls including preparation on new surfaces complete all as specified and directed. .

M&L two coats of cement cement base paint on walls including preparation on old surfaces complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new wooden surfaces incl preparation over a coat of pink primmer complete all as specified and as directed by engineer-in-charge.

Dismantling Stone slabs and tiles of any description or thickness in roof ,sun shades, floors, aprons etc laid bedded and pointed in any mortar. (Note: Dismantling shall be carried out in portion only .)

M&L 5 cm thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4, complete al as specified.

Excavation in trenches n exc 10Sqm on plan n exc 1.5 m deep and n exc 1.5 m wide for laying of UG cable / pole etc and getting out including forming bottom surface to required level and gradient in soft/dense soil complete all as specified and as directed. getting out in any type of soil.

Excavating over area, exc 1.5 m but not exc 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes,beyond the first 1.5 m etc.getting out in soft /loose soil complete all as spfd and directed.

Returning filling in incl spreading levelling watering and well ramming in layers n exc 25cm thickness complete all as specified and as directed by engineer-in-charge.

Removing excavated soil to a distance n exc 50m and depositing at alevel n exc 1.5m above the starting point.

M&L for conc 1:3:6 type C2 using 40mm graded aggregateas in bed to 150mm drain pies incl packing under and haunching against the sides of pipes after they are laid and tested for.

S&F salt glazed stone ware drain pipe 150mm bore, class 'SP 2' ISI marked ,laid to slope in trenches and jointed in CM (1:1) and Tested complete all as spfd and directed. Note:-Excavation and earthwork shall be measured and paid separetely.

M&L brick work in cement mortar (1:4) using old size sub class 'B' bricks in walling, straight or curved on plan exc 6m mean radius all as specified.

M&L For PCC type B1(1:2:4) using 20 mm graded cushed stone agg as in coping ,benching and the like incl form work complete all as specified and as directed by engineer-in-charge.

M&L Precasted RCC 1:2:4 type B1 using 20mm graded aggregates for precast cement conc slabs as in drain/ manhole covers set in cement mortar1:4.(Note : Slab covers shall be floated with surface vibrator,and over turfed base ,arrandement for turfed base has to be from contractors side)

M&L for mild steel steel TMT bars 10/6mm to 8mm dia and over cut to length bent to shape reqd ,incl cranking ,bending spirally for hooping columns hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia .

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete ,using extra cement ,incl forms moulds ,mitered/stopped ends etc

M&L for hard core of broken Bricks of gauge n.exe 63 mm deposited spread and leveled in layers not exe 15cm thick watered and rammed to a true surface complete all as specified.

S&F PVC (SWR) pipes 110mm bore single sockted in any length with PVC vent cowl complete all as specified.

M&L of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3.6m dia and 6.0 m effective depth as per Drg no BTD 830 complete all as specified.

Taking down carefully (aluminium) point wiring complete of any type (batten/ surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as spcified and directed.

Taking down submain wiring Aluminium/ copper of any size including earth continuity condutor on teak wood or conduit and removing from site and making good the disturbed surface of wall etc complete all as specified and directed.

Taking down old U/S existing DB TPN 4 way and DB SPN 8 way including MCB/MCCB of any capacity and any size and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed.

M & L for point wiring for one light/fan/bell/buzzer point controlled by one way switch with 1.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade (ISI Marked) including 1.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade (ISI Marked) as continues earth wire in green colour to coomon earth dolly laid/drawn into and including non metalic PVC concealed conduit (medium duty, ISI marked not less than 20 mm dia) with all fittings such as tee, bends etc all as per IS terminated in & including new modular metal flush boxes of requisite module concealed in wall for mounting fittings like modular Switches, sockets, regulators etc with and including modular cover plates with frame of requisite modules all as specified and as directed: Notes:- (i) Cost of cutting/leaving forming chases for conduit, sinking for metal flush boxes and making good in CM 1:4 shall deemed to be included in quoted rate of this item. (ii) The quoted rates of this item shall deemed for include for modular metal flush boxes of requisite module and modular cover plate with frame of requisite module of colour as approved by GE

(a) One pin 5 amps socket point on the same board with other switches complete

(b) One 3 pin 5 amps socket on independent board.

Ditto all as per item No 157 here -in- before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 4.0 sqmm single core PVC insulated and and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) including 4.0 Sqmm single core PVC insulated and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified and directed .

Ditto all as per item No 157 here -in- before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.5 sqmm single core PVC insulated and and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) including 2.5 Sqmm single core PVC insulated and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified and directed .

S&F switch Modular type, 6 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.

S&F switch Modular type, 16 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.

M&L socket outlet 3 Pin 6 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.

M&L socket outlet 3 Pin 6/16 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed by engineer-in-charge.

S&F ceiling rose, surface backelite , three terminal AC, 230 volt complete all as specified.

Taking down and re-fixing tube light fitting, 1x 20-22 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge.

S&F LED tube light fitting, 1x 20 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. Make : Philips-BN021 LED 20S PSU CW GR S2/ Crompton Greaves LDDR20-CDL Dazzle Ray / bajaj-BCLAB 20W

Supply and fixing LED mirror light fitting , type with high out put diffuser 2 feet, 5watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-charge.

M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by engineer-in-charge.

Taking down fan,sealing cable end, dismantling blades of any make, any sweep, and refixing after necessary repairing such as winding of motor, replacement of capacitor & ball bearing of ceiling fan, cleaning all dust & painting with existing colour synthetic enamel paint by spraying including filling cavities with filler,one coat including writing MES No. all as specified and directed by Engr-in-charge

supply and fixing fan step regulator modular type,120W -2 module electronic socket type five step controlled 230V AC 50 Hz for complete all as specified and directed by Engr-In-Charge.

Taking down Exhaust fan,sealing cable end,dismantling blades of Exhaust fan of any make, any sweep, deposited to store.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers complete all as specified and as directed

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

S&F GI bracket made out of 40 mm bore GI pipe light grade /medume grade, ISI marked, medium grade 1.2m long bent to shape suitable for fixing of street light fitting including with 2 Nos MS clamps made with 40x3mm flat iron, bolts, nuts, washers etc including two coats of synthetic enamel paint over one coat of zinc chrome primer and fixing on electric pole complete all as specified and as directed by Engr-in-charge.

Taking down and refixing water heater storage type of 50 ltrs capactiy with glass line inner shell with Hot & Cold pipe, water connection pipe, electric connection and necessary repairing/replacement of inner tank, siphon assembly, glass wool, thermostate switch, heating element including washers, 3 core PVC insulated copper conductor cable etc including fixing arrangement complete all as specified and directed.

S&F sheet metal enclosure MCB DB, double door, vertical TPN 4 way with 200 Amps rated busbar all as specified and as directed. Make:- Hegar/Legrand/Seimens

S & F double door, sheet metal enclosure, powder coated for MCB DB SPN 8 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed by Engr-in-charge.

S & F MCB SPN, 5-32 Amps, 240 volts, breaking capacity 16KA complete all as specified and as dircted by Engr-in-charge.

S & F MCB SP, 5-32 Amps , 240 volts, breaking capacity 10KA complete all as specified and as dircted by Engr-in-charge.

S&F MCCB 100 amps, 4 pole, 415 volts, fixed type breaking capacity 16KA complete all as specified and as directed by Engr-in-charge.

M&L for submain wiring with 4 runs of 10.0 Sqmm (nominal area) size main cable & 1 runs of 10.0 Sqmm size earth continuity conductor single core PVC insulated unsheathed FRLSH multistranded copper conductor 1100 volt grade ISI marked cable drawn through & including suitable size of heavy duty non metalic rigid PVC concealed conduit ISI marked & conduit fittings/accessories, fixede concealed in wall/ceiling including dismantling & taking down old unserviceable sub main wiring complete all as specified & directed. Note :-(i) 04 runs of 10.0 Sqmm size main cable, 01 run of 10.0 Sqmm size earth continuity conductor cable & Conduit with accessories shall be measured as one run length for payment purpose. (ii) Cost of cutting/leaving forming chases for conduits and making good in CM 1:4 shall be included in quoted rate of this item.

M&L for submain wiring with 2 runs of 6.0 Sqmm (nominal area) size main cable & 1 runs of 6.0 Sqmm size earth continuity conductor single core PVC insulated unsheathed FRLSH multistranded copper conductor 1100 volt grade ISI marked cable drawn through & including suitable size of heavy duty non metalic rigid PVC concealed conduit ISI marked & conduit fittings/accessories, fixede concealed in wall/ceiling including dismantling & taking down old unserviceable sub main wiring complete all as specified & directed. Note :-(i) 02 runs of 6.0 Sqmm size main cable, 01 run of 6.0 Sqmm size earth continuity conductor cable & Conduit with accessories shall be measured as one run length for payment purpose. (ii) Cost of cutting/leaving forming chases for conduits and making good in CM 1:4 shall be included in quoted rate of this item.

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level connecting to the galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanized iron and steel earth wire protected by provision of GI mediumgrade pipe 15mm bore including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) and frame of angle iron 40x 40x6 mm and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering perforated at bottom, 1.75meter long placed on top edge of earth plate, common salt & charcoal filling with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate No -5 of SSR 2009 Part-I and connecting to Lighting protection earth test points all as specifed and directed including testing on completion.

Supply & Laying & commissining of LT UG cable XLPE sheathed PVC insulated, screened PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 volts grade, laid in tranches, in GI pipe, including brass cable glands, clamps etc of size 3.5 core x 50 Sqmm complete all as specifed and as directed. Make : Polycab/KEI/Havells Note: Earthwork, sand cushioning, bricks, GI pipe, etc will be measured and pad under appropriate items.

Supplying and laying un-reinforced precast concrete cable cover, class HVP,type 1 with peak, size 250mm x 150mm x 40mm

M&L for Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 23 cm spread thickness (8 cm in depth before laying the cable and 15 cm in depth after laying the cable) and consolidated (punned) upto 180 mm thickness, complete all as specified and as directed. Note : For the purpose of payment, punned thickness of sand cushioning only shall be measured and paid for.

Supply and fixing GI Pipe light grade og Size 40 mm bore with all fittings for passing of cables fixed to pole/wall/laid under floor or roads including all fixing accessories complete for protection of cable all as specified and directed. Make: Jindal/ Bansl/Tata

M/S Shree Ram Enterprises (BID ID -3171668)

N.K. CONSTRUCTION COMPANY (BID ID -3171553)

M/S ASHRAFI CONSTRUCTION CO (BID ID -3162937)

A.S. CONSTRUCTION COMPANY (BID ID -3165618)

M/S BIKANER CHEMICAL LABORATORIES (BID ID -3166317)