Loading
Loading…
Loading…
Tender Value
₹36.8 L
EMD Value
₹73,700
Closing Date
8 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
EL/MTC
3 conditions · 2 needing a document upload
I/we have read the General Conditions of Contract (GCC) with all Correction Slips up to date, NIT, Tender Document, Corrigendum (if issued) carefully and submitted all the relevant documents as per the requirement of Tender Document. I/we understand that if I/we failed to submit any required document, my bid will be liable for summarily rejection.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Contractor has to submit a copy of valid Electrical Contractor License for carrying out installation work of voltage class involved, issued by any State/Central Government along with a supervisor competency certificate as per Regulation 29 of the Central Electricity Authority (Measure relating to Safety and Electric Supply) Regulation 2010 or latest / as per Rules 45 of the Indian Electricity Rules 1956 along with the tender documents, failing which the offer is liable to be rejected.
Electrification work for provision of compressor Room (25M x20M)
RCF-EL-MTC-86-ET-26-27
RCF-EL-MTC-86-ET-26-27
Open
Works - General
90 Days
Kapurthala, Punjab
₹0
₹73,700
8 Jun 2026
15 May 2026
25 May 2026
49 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 36,80,235.3 | ||
| — | 10.00 | — | — | ||
| Supply, erection, testing and commissioning of Indoor Industrial LED 150 watt luminaries fittings,. The installation of fittings includes the supply and providing of all necessary & required accessories for proper fixing, mounting & installation i.e., Brackets, Clamps, Hook, SS and /or Anti-rusted Brass (Electroplated) Fasteners, Nuts, Bolts, Washers and GI bended pipe suitable for hanging on roof or fixing on pillars as per site requirement etc. as required quantity are also in the scope tenderer. The material of mentioned make only.or fixing on pillars etc. as required quantity are also in the scope tenderer. | — | — | — | 52,735 | |
| — | 7.00 | — | — | ||
| Supply, installation, testing &commissioning of 4 ways Cable Junction Boxes CRCA powder coated with 20 Amp. connector 3 phase with neutral size not less than 180x180x80 mm with cover on truss at required height complete with fixing arrangement and suitable for 4 Core x 16 SQ MM U/A cable. | — | — | — | 2,786 | |
| — | 1.00 | — | — | ||
| Supplying, erecting ,testing & Commissioning of Lighting FDB ,wall/Pillar mounted , made of CRCA sheet steel 1.6 mm, powder coated thickness not less than 40 microns, Incoming 63 Amp SFU front operated with HRC fuses -01nos., Out Going 20 Amp 10 kA SP MCB-10 Nos with suitable DIN rail mounting & Neutral Link Aluminium Bus Bar not less than 15x5mm ,earthing terminals with bolt etc. incoming gland hole for 50Sqmm cable 01 nos at bottom ,Outgoing Gland hole for 10 sqmm cable 12 nos on top side.(Class of Protection IP-42 ) | — | — | — | 9,950 | |
| — | 2000.00 | — | — | ||
| Supply of 4x 400 Sq.mm XLPE insulated PVC outer Sheathed aluminum conductor armoured cable suitable for working voltage upto and including 1100 volts conforming to IS: 7098Part-1 )-1988. With amendment number 1&2 &3 reaffirmed 2005.As per Explanatory Note. | — | — | — | 31,62,000 | |
| — | 300.00 | — | — | ||
| Supply of 4x120 Sq.mm XLPE insulated PVC outer Sheathed aluminum conductor armoured cable suitable for working voltage upto and including 1100 volts conforming to IS: 7098Part-1 )-1988. With amendment number 1&2 &3 reaffirmed 2005.As per Explanatory Note. | — | — | — | 1,82,100 | |
| — | 300.00 | — | — | ||
| Supply of 2x 10 Sq.mm XLPE insulated PVC outer Sheathed aluminum conductor armoured cable suitable for working voltage upto and including 1100 volts conforming to IS: 7098Part-1 )-1988. With amendment number 1&2 &3 reaffirmed 2005.As per Explanatory Note. | — | — | — | 29,850 | |
| — | 15.00 | — | — | ||
| Supply of 4x 16 Sq.mm XLPE insulated PVC outer Sheathed aluminum conductor armoured cable suitable for working voltage upto and including 1100 volts conforming to IS: 7098Part-1 )-1988. With amendment number 1&2 &3 reaffirmed 2005.As per Explanatory Note. | — | — | — | 1,515 | |
| — | 2615.00 | — | — | ||
| Laying & Fixing of XLPE insulated PVC Outer sheathed aluminium conductor armoured cable size (4x 400, 4x 120, 2x 10Sq. Mm) | — | — | — | 32,478.3 | |
| — | 6.00 | — | — | ||
| Supplying & making cable End termination of 4x 400 sq.mm Aluminium Armoured PVC/XLPE cable. all material required including double compression brass gland, nuts, bolts, PVC tape crimping lugs etc. complete as required for following sizes of aluminum conductor cables. Make as mentioned only. As per Explanatory Note. | — | — | — | 4,854 | |
| — | 20.00 | — | — | ||
| Supplying & making cable End termination of 2x 10 sq.mm Aluminium Armoured PVC/XLPE cable. all material required including double compression brass gland, nuts, bolts, PVC tape crimping lugs etc. complete as required for following sizes of aluminum conductor cables. Make as mentioned only. As per Explanatory Note. | — | — | — | 995 | |
| — | 4.00 | — | — | ||
| Supplying & making cable End termination of 4x 120 sq.mm Aluminium Armoured PVC/XLPE cable. all material required including double compression brass gland, nuts, bolts, PVC tape crimping lugs etc. complete as required for following sizes of aluminum conductor cables. Make as mentioned only. As per Explanatory Note. | — | — | — | 1,732 | |
| — | 2000.00 | — | — | ||
| Supply & Laying of 8 SWG GI earth wire as per explanatory note | — | — | — | 30,000 | |
| — | 4.00 | — | — | ||
| supply, testing, fixing and commissioning of Exhaust fan 450 mm as per explanatory note. | — | — | — | 24,000 | |
| — | 1.00 | — | — | ||
| Supply, fixing, testing and commissioning of pre fabricated 6 way SPN distribution board of sheet enclosed with DP MCB 63 Amp.1 nos.,SP MCB 25A-10 nos . Make: L&T,Havells ,Legrand, SSk,Anchor,C&S,Siemens,Hager, ABB,Schneider | — | — | — | 4,720 | |
| — | 130.00 | — | — | ||
| Supply & providing of MS conduit pipe of 16 SWG 25mm dia ISI marked of mentioned makes only, including bends ,elbows and jn box (conduit pipe shall be clamped at every one meter distance with saddling on ceiling/wall of the area). | — | — | — | 9,100 | |
| — | 200.00 | — | — | ||
| Supply, wiring, testing and commissioning of light points with FRLS wire 2x2.5sq.mm multi stranded copper conductor, conforming to IS -694-1990, with 1sqmm green multi stranded copper wire as earth). As per Explanatory Note. | — | — | — | 11,144 | |
| — | 1.00 | — | — | ||
| Supply, Installation and commissioning of outdoor Sub distribution board (SDB) double door panel with incoming 250amp and out going 04 nos 100 amp canopy made from 2.5 mm CRCA sheet, powder coated. As per Explanatory Note. Panel should be open both side. (front and back side) | — | — | — | 70,000 | |
| — | 2.00 | — | — | ||
| Supply of Industrial type Air Circulators (Man cooler) as per explanatory notes | — | — | — | 31,840 | |
| — | 2.00 | — | — | ||
| Supply installation and commissioning of ( Direct on line) DOL Starter range 1.6 to 2.5 Amperes, Contactor coil voltage 415-440 volt ,Over load relay suitable for 1HP ,3 phase motor in sheet enclosure Make- Siemens,L&Tor BCH. | — | — | — | 2,388 | |
| — | 2.00 | — | — | ||
| Mounting/ Fixing and commissioning of man cooler on wall/pillar by welding of base plate required at site and wiring of man cooler from starter to fan. | — | — | — | 199 | |
| — | 40.00 | — | — | ||
| Supply Wiring, testing and commissioning of Air circulator with FRLS Wire 3x 2.5 PVC insulated multi stranded copper conductor wire, conforming to IS-694-1990, in existing MS Conduit 25 mm dia. | — | — | — | 5,480 | |
| — | 40.00 | — | — | ||
| Supply Wiring, testing and commissioning of Air circulator with FRLS Wire 1x 2.5 PVC insulated multi stranded copper conductor wire, conforming to IS-694-1990, in existing MS Conduit 25 mm dia. | — | — | — | 1,800 | |
| — | 1.00 | — | — | ||
| Supply, Installation & Commissioning of DB For Air Circulator, made of CRCA sheet steel 1.6 mm thick, powder coated thickness not less than 40 microns, consisting of(1) Recycling type timer-time setting (sec. to hours) , (2) Single phase preventer ,(3)Power Contactor 3 phase 25 Amp.,(4)MCB TPN 32 Amp/10 KA, internally wired with suitable copper wires. | — | — | — | 8,169 | |
| — | 10.00 | — | — | ||
| Supply & Fixing of Flexible conduit pipe 20 Sq.mm | — | — | — | 400 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tenderofcompressorroom1.pdf Tender of compressor Room
ATTACHMENT
Tenderofcompressorroom1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .