8311 REPAIR TO INTERNAL WIRING SUBMAIN WIRING INCLUDED REPLACEMENT OF UNSERVICEABLE LIGHT FITTINGS AT ND MUMBAI UNDER GE NW KUNJALI

Amount

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/ power) complete with switches, sockets, ceiling roses, lamp holders, brackets & other fitting & Fixtures connected, and making good to disturbed surfaces as directed.

Taking down old U/S tube light fittings single / Twin, Recessis mount fitting , etc and making good the distrubed surface matching with existing surface all as per directed.

Taking down old u/s MCB DBs complete with MCBs, isolator etc of any type and capacity from wall/ceiling etc & making good to the disturb surfaces all as directed.

M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100volts, drawn through and including non metalic rigid PVC casing and caping not less than 25mm ISI marked) with all accessories fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of PVC molded box with cover plate in any size fixed on wall for fixing the switches, switch sockets, sockets, regulators etc complete all as specified for:- NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza (c) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

(a) One light point controlled by one 5A switch

(b) One Fan point controlled by one 5A switch

(c ) One Bell point controlled by one bell push

(d) One 5A flush type switch socket point on same board board

(e) One 5A flush type switch socket point on independent board

M&L for point wiring complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts (ISI marked), FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 4.0sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including PVC molded box with cover plate complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza (c) Switch socket measured & paid separately.

S & F in replacement of Switch piano flush type single pole one way, 5/6 Amps complete all as directed.

S & F in replacement of Bell push, 5/6 Amps, 240 volts SP complete all as directed.

Supply and fix switch sockets combination 5 pin 5 Amps flush type 240 Volts AC complete.

Supply and fix in replacement switch socket combination multi purpose 3 pin 15 Amps controlled by one switch flush type 240 Volts AC complete.

S & F in replacement of fan regulator electronic step type socket size and making all necessary connections complete all as directed.

S & F in replacement of bell, DINGDONG type, 6 Amps, 240 volts, SP complete all as directed.

S & F in replacement of Ceiling rose, PVC/polycarbonate insulated body type, 3 teRunning Metreinal, 240 volts, 5 Amps complete all as directed.

S & F in replacement of lamp holder PVC/polycarbonate insulated body type complete all as directed.

S & F in replacement 20 Amps Single pole and neutral enclosure with a Two Pin and earth plug and socket complete with one single pole MCB and making connections complete all as directed. Make -Legrand Cat Part No. 5078 14 or equivalent in Siemens /Crompton / C&S

S & F in repirs LED light fitting 20W, 230 V, 4 feet surface monted, indoor decorative aluminium extruded T- 5 LED batten, integrated type etc., complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed. Make- C & S cat part No. LTTB4F20WLED/W (Nakshatra series) or equivalent cat part in Crompton/ Havells /Philips / Bajaj

S & F in repirs LED light fitting 10W, 230 V, 24 feet surface monted, indoor decorative aluminium extruded T- 5 LED batten, integrated type etc., complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed. Make- C & S cat part No. LTTB210WLED/W (Nakshatra series) or equivalent cat part in Crompton/ Havells /Philips / Bajaj

Supply and fixing in repair Recessed full / Surface type LED 2X2 Luminaire 36 watt and CRCA powder coating housing with anti-glare diffuser, New deep back lit type surface mounting LED Luminaire provides high quality ecomonic energy saving lighting suitable for 600 x 600 mm modular/POP/Gypsum ceiling complete all as specified and as directed. Make: Crompton cat No LCTLSN-36-CDL(2X2) / C&S cat No LTCSP36WLED2X2 or equivalent Cat part in Surya / Philips

S &F 150 WATT LED Highbay/Mediumbay LED IP65 luminaire (CORVUS-E SERIES) with high efficacy, PDC aluminium housing with polycarborate diffuserk dedicated mounting eye bolt complete with all acessories and fixing arrangement al as specified and directed. Make- C & S CAT Part No.- LTEHB150WHPLED/LS/WOR or equivalent cat part in Crompton/ Havells /Philips / Bajaj

S &F in repair Ultra slim edge lit type recess mounting LED 2X2 Luminaire 36 watt and extruded aluminium housing with anti-glare diffuser provides high quality ecomonic energy saving lighting LED Luminaire suitable for 600 x 600 mm modular/POP/Gypsum ceiling complete all as specified and as directed. Make: Crompton cat No LCPL-36-CDL(2X2) / C&S cat No LTCRSLM36WATT2X2 or equivalent Cat part in Havells / Philips

S &F LED Street light 48 Energy Saving and Environment friendly light fitting with 24 nos LED Light source 4800 lumens with electronic gear housed in Pressure diecast alluminium alloy LM6 with IP65 protection operating volt up to 265 volts Make- Havells/Wipro/phillips / Bajaj

S & F in replacement 63 Amps Triple pole and earth encolsure with a three pin and earth plug with socket complete with one single pole MCB. Make -Legrand Cat part no -507864, or equivalent cat part in Crompton/ Havells

S & F in replacement of MCB 1 to 4 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed. Make- Legrand/Siemens/Havells

S & F in replacement of MCB 6 to 32 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed. Make- Legrand/Siemens/Havells

S & F in replacement of MCB,SPN 40 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed. Make-Legrand/siemens/Havells

S & F in replacement of MCB, SPN 63 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed. Make-Legrand/siemens/Havells

S & F in replacement of MCB, 4 Pole, 63Amps capacity, C Curve type suitable for 415 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed. Make - Legrand Cat Part No. 4087 02 or equivalent in Siemens /Havells/ C&S

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand Cat Part No. 5076 42 or equivalent in Siemens /Havells/ C&S

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand Cat Part No. 5076 41 or equivalent in Siemens / Havells / C&S

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand Cat Part No. 5076 40 or equivalent in Siemens/ Havells / C&S (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IK 08 protection surface mounting Metal enclosures 2 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand Cat No. 5077 91 or equivalent in Siemens/ Havells / C&S

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting TPN 4 way, 440 volts with copper bus bar rating 100 Amps for each phase with 2 neutral bar, dust and vermin proof suitable for incorporation of MCB’s etc complete all as directed. Make - Legrand Cat No 5077 35 or equivalent in Siemens /Havells/ C&S

S & F MCCB, 415 volts, Four pole of cap 100 Amps, 25 KA, ICS = 100% ICU, with fixed Thermal- Magnetic setting including spreader terminal/ thimble of suitable size and making connections and taking down the existing unsrviceable MCCB from the panel complete all as directed. Make - Legrand cat No 4200 55 or equivalent in Siemens/ Havells / C&S NOTE FOR ITEM No. 27 to 32 : [i] MCB DBs shall be concealed in wall wherever posible including making good the surface to match with surrounding. [ii] The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0sq mm 3½ core. laid in duct / along pole/wall etc including making connection including taking down old unsv XLPE cable of any size complete and making good the distrubed surface matching with existing surface complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

S & F MCCB, 415 volts, four pole of cap 160 Amps, 25 KA, ICS = 100% ICU, with fixed Thermal - Magnetic setting including spreader terminal/ thimble of suitable size and making connections complete all as directed. Make - Legrand Cat Part No. 4200 57or equivalent in Siemens/ Havells / C&S

S & F MCCB, 415 volts, four pole of cap 200 Amps, 36 KA, ICS = 100% ICU, with fixed Thermal - Magnetic setting including spreader terminal/ thimble of suitable size and making connections complete all as directed. Make - Legrand Cat Part No. 4202 48 or equivalent in siemens/GE

Supply MCCB, 415 volts, 3 pole of cap 160 Amps, 36 KA, ICS = 100% ICU, with fixed Thermal- Magnetic setting including spreader terminal/ thimble of suitable size and making connections complete all as directed. Make - Legrand Cat Part No. 4200 87 or equivalent in Siemens/ Havells / C&S

Supply MCCB, 415 volts, 3 pole of cap 250 Amps, 36 KA, ICS = 100% ICU, with fixed Thermal- Magnetic setting including spreader terminal/ thimble of suitable size and making connections complete all as directed. Make - Legrand Cat Part No. 4202 39 or equivalent in Siemens/ Havells / C&S

Supply MCCB, 415 volts, 3 pole of cap 400 Amps, 50 KA, ICS = 100% ICU, with fixed Thermal- Magnetic setting including spreader terminal/ thimble of suitable size and making connections complete all as directed. Make - Legrand Cat Part No. 4220 16 or equivalent in Siemens/ Havells / C&S

Supply MCCB, 415 volts, 3 pole of cap 125 Amps, 25 KA, ICS = 100% ICU, with fixed Thermal- Magnetic setting including spreader terminal/ thimble of suitable size and making connections complete all as directed. Make - Legrand Cat Part No. 4200 46 or equivalent in S iemens/ Havells / C&S

S & F MCCB, 415 volts, 3 pole of cap 63 Amps, 25 KA, ICS = 100% ICU, with fixed Thermal- Magnetic setting including spreader terminal/ thimble of suitable size and making connections complete all as directed. Make - Legrand Cat Part no 4200 43 or equivalent in Siemens/ Havells / C&S

S & F of MCCB, FP sheet metal enclosure suitable for holding MCCB of 100 amp capacity including fixing accessories etc complete all as directed. Make - Legrand Cat Part No 5077 93 or equivalent in Siemens/ Havells / C&S

M & L in repair Submain wiring with two run 4 Sqmm single core multistranded PVC insulated & unsheathed copper conductors 1100 volts FRLS grade ISI make drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc including one run PVC insulated & unsheathed multistranded copper conductor 4Sq. mm FRLS grade ISI make as earth continuity conductor connected to common earth as earth dolly

M & L Submain wiring with two run 6 Sqmm single core multistranded PVC insulated & unsheathed copper conductors 1100 volts FRLS grade ISI make drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc including one PVC insulated & unsheathed multistranded copper conductor 6.0 Sq. mm FRLS grade ISI make as earth continuity conductor connected to common earth as earth dolly

S & F exhaust fan of sweep 300 mm heavy duty type complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by using 4 Nos 200 mm long 12 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 completed all as specified and directed. Make: Havells/CG/ khaitan

S & F exhaust fan of sweep 380 mm heavy duty type complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by using 4 Nos 200 mm long 12 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 completed all as specified and directed. Make: Havells/CG/ khaitan

S & F Ceiling fan 5 Star Rated 1200 mm sweep heavy duty type complete with and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by completed all as specified and directed. Make: Havells/CG/ khaitan

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6sq mm 2 core. laid in duct / along pole/wall etc including making connection complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

Material and labour for point wiring 1.5 sq mm FRLS Copper cable 1100 volt grade drawn in and including stove enamelled steel ERW conduit not less than 19mm dia including spacers, saddles, screws etc & 1.5 sqmm PVC insulated copper earth wire including including connected to flame proof switches/sockets etc on indepaendant all as specified and directed.

M&L point wiring with 4 sqmm PVC insulated and sheathed copper cable 1100V grade multistranded drawn in and including stove enameled steel conduit not less than 20 mm on wall / ceiling with tee bend, elbows, junction box etc with provn of PVC insulated, 4 sqmm copper conductor cable as earth continuity including connected to flame proof switches etc on indepaendant.

S&F Flame Proof Switch socket & plug combined in LM6 cabe termination box in LM6 16 Amps 250 V multi 3 pin 5 and 3 pin 16 A rotary type with termination box in LM6 single pole 230 V, complete all as directed. Make-Sudhir or equivalent in Crompton/Ajmera or approved by GE

S&F Flame Proof Switch rotary type with termination box in LM6 single pole 230 V, complete all as directed. Make-Sudhir or equivalent in Crompton/Ajmera or approved by GE

S&F 60 watt LED Flame proof CMRI Approved Bulkhead/well glass luminaire recommended for gas/vapour group of IIA & IIB and Zone 1 &2 die cast Aluminum housing with heat Resistant toughned glass IP65 Protection,fixing at any height all as specified and directed. MAKE - CG Cat part no-FWL1315-60-CDL or equivalent as approved by GE

S&F LED tube light fitting flameproof integral well glass luminaire of 2x20 Watt recommended for illuminating hazard area laden with gases or vapour of group II & III B & Zone 1 & 2 die cast aluminium housing withtoughned clear heat resitance well glass is cemented into a retaining ring which is fixed with screws to the main housing complete all as specified and directed. MAKE-CG CAT NO-EXTN2LT8-16/20 or equivalent as approved by GE

Supply & DLP PVC trunking system and accessories-trunking and fittings,Bodies supplied with out cover 105 x 50 mm all as specified and directed Make - Legrand cat part No. 0104 22 or equivalent as approved by GE

Supply & DLP PVC trunking system and accessories-trunking and fittings, Flexible cover fits into the whole branch including in internal or external angles supplied with Body cover 85 mm all as specified and directed. Make - Legrand cat part No. 0105 22 or equivalent as approved by GE

Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level connected and incl galvanised earth lead wire 4.0mm dia by means of nuts & bolts, check nuts and wassher of galvinsed incl PCC (1:2:4) type B-1 cover reinforced with XPM (weight not less than 4 kg/sqm) and frame of angle iron 25mm x 25mm x 3mm excavation and earth work in any type of soil, charcoal dust, salt light grade GI watering pipe 20mm dia with funnel and wire-mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distrubution board complete all to as shown in electrical plate No 3 of MES sch 2009 (part-I) connected main switch board all as specified and testing on completion .

ASHOK ENTERPRISES

Rohit Enterprises

ELECTRO ASSOCIATES

SAI SERVICE

DHARMESH ENTERPRISES

Nexus Infratech