M/o Various Colonies under East Zone

1.0) Running, maintenance and operation of clear water booster p/set, DG set ,IEI and compound lighting at 96 MIG/96 LIG at block R, Dilshad Garden as per the inventory, terms & condition and deploying the following manpower : a).OperatorGrade-II - 2 Nos. ( 6 AM to 2 PM & 2 PM to 10 PM, one in each shift) b).Khallasi - 1No. ( 10 PM to 6 AM )

2.0) Running maintenance and operation of sewage pumping station & DG set at R-Block Dilshad Garden as per the inventory, terms & condition and deploying the following manpower : a).OperatorGrade-II - 2 Nos. ( 6 AM to 2 PM & 2 PM to 10 PM, one in each shift) b).Khallasi - 1No. ( 10 PM to 6 AM )

3.0) Running, maintenance and operation of clear water booster pump set, submersible pumpset,DG Set ,IEI and compound lighting at 480 EWS Kondli Gharoli as per the inventory, terms & condition and deploying the following manpower : a). OperatorGrade-II - 2 Nos. ( 6 AM to 2 PM & 2 PM to 10 PM, one in each shift) b). Khallasi - 1No. ( 10 PM to 6 AM )

4.0) Running, maintenance and operation of clear water booster pump set, submersible pump set, DG Set ,IEI and compound lighting at 1350 EWS Kondli Gharoli as per the inventory, terms & condition and deploying the following manpower : a). OperatorGrade-II - 2 Nos. ( 6 AM to 2 PM & 2 PM to 10 PM, one in each shift) b). Khallasi - 1 No. ( 10 PM to 6 AM)

5.0) Replacement of defective/ faulty of following parts in existing electrical panel board i/c testing etc. as if required.

5.1) ML- 1.5 Starter (L&T make ML- 1.5 FASD)(make- L&T or similar superior)

5.2) 3 Pole 32 Amp. Contactor (make- L&T or similar superior)

5.3) 3 Pole 70 Amp. Contactor (make- L&T or similar superior)

5.4) 63 Amp. TP&N Switch SFU Type (make- L&T or similar superior)

5.5) Digital A. Meter, V. Meter of suitable range(make- AE or similar superior)

5.6) Single phase preventer (make- AE or similar superior)

6.0) Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel,making connections, Ics=100% Icu and Operational Voltage 690V etc. as required.

6.1) 200 A, 25 KA, TP MCCB

6.2) 200 A,36KA, FP MCCB

7.0) Performing of following job for repairing 15HP Centrifugal pump set assembly (Clear water ) i/c dismentling ,making of gland dori,greasing,packing sheet,providing nut -bolts,re-assembling and testing etc. complete as if reqd.

7.1) S/R of Ball bearing

7.2) S/R of Neck Ring (GM)

7.3) S/R Gland Plate

7.4) S/R Gland Sleeve(SS)

7.5) S/R of Pump Shaft

7.6) Remetalling & balancing of Impeller

8.0) Performing of following job for repairing 75 HP Centrifugal pump set assembly (Sewage Pump ) ,make-Mather& Plat i/c dismentling ,re-assembling and testing etc. complete as if reqd.

8.1) S/R of Roller bearring

8.2) S/R of Roller bearing

8.3) S/R Gland Plate(CI)

8.4) S/R Gland Sleeve(SS)

8.5) S/R of Neck Ring

8.6) Impeller remettaling,turning

9.0) Repairing & rewinding of following rating Induction Motor (3 phase, 440 volt) i/c dismentling and re-assembling after rewinding and replacement of ball bearing, testing,commissioning etc. complete as if reqd. 9.1) 40 HP

10.0) Repairing & rewinding of 3 HP monoblock clear/dewatering pump set (make- Kirloskar)i/c dismentling, re-assembling and testing etc. complete as if reqd.

S/R of Ball bearing

S/R Rewinding of motor

S/R Connection Plate

S/R of Gland Sleeve

Please Enable Macros to View BoQ information