WBPHED/EE/MLMD/NIeT_08 of 2020-2021

Amount

Dismentling and taking down all the non functioning light luminaries from recessed celing and street poles for repairing or replacing of the same and taking them to the Store of Daulatpur PHE Complex all complete as per direction of EIC.

Cutting cornices/ steps, enlarging recess in false celing buildings etc. and mending good damages to the building works for seating of the recess mounted downlight.

Supply, delivery, fitting and fixing of 20 watt LED Lamp (B22), 220 V -240 V, 50 Hz, (Make- Philips/ Havells/other approved make) in suitable holder of approved make and making neccessary interconnection with supply of suitable gauge copper wire all comoplete as per direction of E.I.C.

Supply, delivery, fitting and fixing of 9 watt LED Lamp (B22), 220 V -240 V, 50 Hz, (Make- Havells/Philips/ other approved make) in suitable holder of approved make and making neccessary interconnection with supply of suitable gauge copper wire all comoplete as per direction of E.I.C.

Supply, delivery, fitting and fixing of 3 watt LED Downlight Lamp (Model-Joy), 220 V -240 V, 50 Hz, (Make- Havells/ Philips/ other approved make) in suitable location of approved make and making neccessary interconnection with supply of suitable gauge copper wire all comoplete as per direction of E.I.C.

Supply, delivery, fitting and fixing of 15 watt LED Downlight Lamp (Model-Amaze), 220 V -240 V, 50 Hz, (Make- Havells/Philips/other approved make) in suitable location of approved make and making neccessary interconnection with supply of suitable gauge copper wire all comoplete as per direction of E.I.C.

Supply, delivery, fitting and fixing of 8 watt LED Downlight Lamp ( Model- Amaze), 220 V -240 V, 50 Hz, (Make- Havells/Philips/ other approved make) in suitable location of approved make and making neccessary interconnection with supply of suitable gauge copper wire all comoplete as per direction of E.I.C.

Supply & laying of 1.1 KV Gr. 2 core 6 sq.mm XLPE Armored Alu. Cable (M- GLOSTER/HAVELLS/FINOLEX) after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth of 75 mm as below and mending good the damages to original finish incl. removing the rubbish. (Cable will be procured as per site requirement)

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of 3 x 22/0.3 (1.5 sqmm) (M-Finolex/KEI/Havells) through GI pipe and making necy. connection as required as per direction of the E.I.C (From pole loop box to LED fittings). (Cable will be procured as per site requirement)

Unfixing existing double door SPN MCBDB concealed in wall after cutting wall & mending good the dameges to original finish incl. interconnection with suitable size of copper wire and neutral link & Provision for earthing attachment.

Supplying and fixing 240 V, 10 A SPMCB of breaking capacity 10 kA & 'C' characteristics on din rail after refixing the existing DBs & necessary connection(Make- Havells/ABB) all complete as per direction of E.I.C.

Supplying and Fixing 250 x 250 x 100mm GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement,reqired GI Pipe for cable laying, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 6A SPMCB unit, one NL on porcelain insulator etc. and fiting the same in pole muffing including proper foundation, S&F bolts, nuts etc. after dismantling the damaged looping cable box etc. where necy. incl. painting with anti corrosive material as directed by EIC.

Supply, delivery, fitting & fixing of die cast aluminium housing gate light 1x40watt LED Outdoor luminiare (Make-CGL, LPTO-40-CDL) Milky white Decorative Post top for 360° indirect light , IP 65 protection, resistant to impact and corrosion incl. painting of existing G.I Pipe after surface preparation as per direction of EIC.

S&F Crompton Wall Mount High Speed Whirlwind Gale 400 mm sweep (Model- SDX Black Gold) at Dinning room with necessary interconnection all complete as per direction of EIC.

Supply, delivery & fitting-fixing at site of various parts of Stainless Steel cot of 4' x 7' size with 16 mm thick ply of the same dimension.

Supply, delivery at site including design and manufacturing of Aluminium composite Panel (ACP 3 mm ALUDECOR Exterior AL-33) LED board with 10 mm imported acrylic pasted vioyl letter (Subject and design as per EIC) in one side glassing Aluminium sheet with different Color imported LED lights as per direction of EIC. The board should have inbuilt power circuit board connected with LED lamp suitable for opening in 230 volt 50 Hz AC supply (Colour type, colour letter & graphics will be as per direction of EIC)

Installation of the above LED board in front side of the building/ suitable position by suitable attachment with proper position including supply and laying PVC insulated single core copper cable through PVC pipe of required length for power connection from nearest power source including earthing connection all complete as per direction of EIC.

Ordinary Cement concrete (Mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any in roof floor as per IS:456-200(Pakur Variety)

Plaster to wall, floor etc with sand and cement morter (1:6) including rounding off or champhering corners as directed and racking out joints or roughing of concrete surface including throating, nosing and drip course where necessary (In all floors).P.W.D Building Schedule Page-189, Item No-1

a) With 6:1 cement morter.

i) 15 mm thick plaster(out side Wall)

Hire & Labour charges for shuttering with centering & necessary straging up to 4mtr. Using approved stout props & thick hard wood planks of approved thickness with required bracing for concrete work including fitting & fixing & stracking out & after completion of work.(up to roof of Ground floor)

a) 25mm to 30mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.P.W.D Building Schedule Page-42, Item No-36

Priming one coat on timber, plastered or on steel or other metal surface with synthetic enamel / oil bound primer of approved quality i. e. smoothening surface by sand papering etc. P.W.D Building Schedule Page-200, Item No-1

b) Steel work Two coats (with any shade except white)

Painting with best quality synthetic enamel paint of approved make and brand i.e. smoothening surface by sand papering etc. i.e. using of approved putty etc. on the surface, if necessary, with super gloss (Hi gloss). P.W.D Building Schedule Page-176, Item No-8

b) Steel work Two coats (with any shade except white)

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof.

I) For structural members of specified sections weighing less than 22.5 Kg./m

MAKE AS PER DEPARTMENTAL APPROVED VENDOR LIST CIRCULATED VIDE MEMO NO.PHE/IV/2277/W-181/19 DATED- 25/09/2019

Add GST @ 12%

Add Cess @ 1%

M/S. Sajahan Chowdhury

DEY ENTERPRISE

ANIMA ENTERPRISE