Upgradation / renovation of office Chamber of DIG (Hqrs) at 4th floor at PHQ Jammu under Account Head Minor Civil and Electrical works in Demand 51 Police

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters with ISI marked M.S. pressed butt hinges bright finished of required

Remodeling/ Redesigning of old windows by way of providing and fixing of 19mm and 12mm water proof ply in frames with 1mm Sunmica all over including fixing of 2nd class Kail wood shutters as per the directions including dismantling of old windows, cost of all fittings and fixtures 10mm glazing including cost and carriages of material complete Job.

Providing and fixing of Zebra blinds of superior make amd manufacture including all costd and carraige of material complete Job.

Engagement of labour skilled/ unskilled for various dismantling works like tacking of floors, damaged tiles, etc including stacking of serviceable material as directed by EIC and disposal of unserviceable material up to 50 mtr lead.

Labour

Carpenter

Providing and fixing of superior quality wall paper including cost of adhesive like fevicol, chemical etc and carraige of material complete Job as directed by EIC

Providing , suppling and fixing of fluted panels/ louvers of approved make design, shade , colour and profile including all necessary adhesive, aluminium /GI/M S Supporting frame work wherever required , screws, fastenersm clips, trims, edge/ corner profile and other acessories compelte for proper and neat installtion on internal walls/ partitions. the item shall include cutting, drilling, fitting, joining, finishing, wastage, loading/ unloading, transportation to site and all labour tolls , tackles, scafolding, ladders and incidental charges complete in all respects as directed by EIC.

Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600 mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately) GI Metal Ceiling Lay in plain Tegular edge Global white colour tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.