ESTABLISHMENT OF IT NETWORK CONNECTIVITY

Supply & Installation of Cat 6 Utp Cable (305mtrs) - Dlink/ AMP/ Digisol - 6 Nos

Supply & Installation of Cat 6 Face Plate, Information Out Back Box -Dlink/ AMP/ Digisol - 135 Nos

Supply & Installation of Rj 45 Connectors -Dlink/ AMP/ Digisol - 200 Nos

Supply & Installation of 9U 500 depth Wall Mount Rack With Accessories along with power supply - Dlink/Netrack/Valrack - 2 Nos

Supply & Installation of Cat 6 Utp Patch Cords 2Mtrs - Dlink/ AMP/ Digisol - 135 Nos

Supply & Installation of Dlink 48 Port Gigabit Switch - Dlink/HP/ Cisco - 2 Nos

Supply & Installation of Dlink 24 Port Gigabit Switch -Dlink/HP/ Cisco - 2 Nos

Supply & Installation of 45mmx45mm Pvc Channel - 200 Mtrs

TECHNICAL SPECIFICATIONS

DETAILS

Interfaces

• 4 x 100/1000 Mbps GbE/SFP Combo ports

Port Standards

• IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)

• IEEE 802.3u 100BASE-FX 100 Mbps over fiber optic

• IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper)

• IEEE 802.3z 1000BASE-X 1 Gbps over fiber optic

• IEEE 802.3az Energy Efficient Ethernet (EEE)

• IEEE 802.3x Flow Control

Duplex Mode

• Full-duplex for 1000 Mbps

Media Interface Exchange

Performance

Switching Capacity

Static MAC Addresses

CPU Memory

Power Input

Weight

Interfaces

• 4 x 100/1000 Mbps GbE/SFP Combo ports

Port Standards

• IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)

• IEEE 802.3u 100BASE-FX 100 Mbps over fiber optic

• IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper)

• IEEE 802.3z 1000BASE-X 1 Gbps over fiber optic

• IEEE 802.3az Energy Efficient Ethernet (EEE)

• IEEE 802.3x Flow Control

Duplex Mode

• Full-duplex for 1000 Mbps

Media Interface Exchange

Performance

Switching Capacity

Static MAC Addresses

CPU Memory

Power Input

Weight

SCOPE OF WORK FOR ESTABLISHMENT OF NETWORK CONNECTIVITY

All switches shall be installed and configured at network rack by the agency based on the requirement of the IT department inputs.

It is mandatory to do the inspection of the site before submitting tender bid. Agency can approach FMD -HAL for visiting site for inspection to understand the exact requirement.

All laying cable , PVC channel , casing caping pipe and splicing work will be carried out by the agency.

During executing project, if any existing cables, pipes etc are damaged then vendor has to rectify from his/her own expenditures.

Necessary power cables and accessories shall be supplied by the agency to enable the switches and network I/O ports.

Agency has to do each and every activity for completion of full project for installation, configuration of switches and fixing of network I/O ports at desired place on wall/table.

Agency has to supply network Switches which should be compatible with existing switches.

Installation and testing of all ports shall be done by the agency.

The quoted value shall be inclusive of all labour efforts, materials, taxes, wastages. etc and nothing extra is payable.

The work will be awarded as a full project for supply, installation, commissioning of all materials in purchase order.

Supply & Installation of Cat 6 Utp Cable (305mtrs) - Dlink/ AMP/ Digisol - 6 Nos

Supply & Installation of Cat 6 Face Plate, Information Out Back Box -Dlink/ AMP/ Digisol - 135 Nos

Supply & Installation of Rj 45 Connectors -Dlink/ AMP/ Digisol - 200 Nos

Supply & Installation of 9U 500 depth Wall Mount Rack With Accessories along with power supply - Dlink/Netrack/Valrack - 2 Nos

Supply & Installation of Cat 6 Utp Patch Cords 2Mtrs - Dlink/ AMP/ Digisol - 135 Nos

Supply & Installation of Dlink 48 Port Gigabit Switch - Dlink/HP/ Cisco - 2 Nos

Supply & Installation of Dlink 24 Port Gigabit Switch -Dlink/HP/ Cisco - 2 Nos

Supply & Installation of 45mmx45mm Pvc Channel - 200 Mtrs

GRAND TOTAL

GRAND TOTAL [IN WORDS]

Goods & Service Tax: Applicable GST should be clearly indicated (in % & Rs.) or shall be deemed as included.

Validity of quotations (As per HAL validity upto 120 days from due date):

Acceptance of General terms and conditions of tender as per Annexure

Payment term: Payment will be done within 30 days after successful completion of installation/commissioning and certification of the indenting department.

Delivery time: Items should be delivered and installed within 07 days from the date of Purchase order.

Site inspection is mandatory -kindly find the mentioned below contact details for site inspection - IT department - FMD HAL , Bangalore Phone :- 080-22321495 / 080-22322790 / 080-22321227

UNDERTAKING BY THE VENDOR : READ AND UNDERSTOOD ALL THE ABOVE (SPECIFICATION OF ITEMS, ACCEPTANCE CRITERIA, OTHER REQUIREMENTS AND GENERAL TERMS AND CONDITIONS) ANNEXURE ALONG WITH PARAS AND SUB PARAS MENTIONED THERE IN AND THE SAME IS AGREEABLE TO US AND THE QUOTE SUBMITTED/TO BE SUBMITTED BY US IS TAKING INTO CONSIDERATION OF ABOVE POINTS.

Supply & Installation of Cat 6 Utp Cable (305mtrs) - Dlink/ AMP/ Digisol

Supply & Installation of Cat 6 Face Plate, Information Out Back Box -Dlink/ AMP/ Digisol

Supply & Installation of Rj 45 Connectors -Dlink/ AMP/ Digisol

Supply & Installation of 9U 500 depth Wall Mount Rack With Accessories along with power supply - Dlink/Netrack/Valrack

Supply & Installation of Cat 6 Utp Patch Cords 2Mtrs - Dlink/ AMP/ Digisol

Supply & Installation of Dlink 48 Port Gigabit Switch - Dlink/HP/ Cisco

Supply & Installation of Dlink 24 Port Gigabit Switch -Dlink/HP/ Cisco

Supply & Installation of 45mmx45mm Pvc Channel

1) All switches shall be installed and configured at network rack by the agency based on the requirement of the IT department inputs.

2) It is mandatory to do the inspection of the site before submitting tender bid. Agency can approach FMD -HAL for visiting site for inspection to understand the exact requirement.

3) All laying cable , PVC channel , casing caping pipe and splicing work will be carried out by the agency.

4) During executing project, if any existing cables, pipes etc are damaged then vendor has to rectify from his/her own expenditures.

5) Necessary power cables and accessories shall be supplied by the agency to enable the switches and network I/O ports.

6) Agency has to do each and every activity for completion of full project for installation, configuration of switches and fixing of network I/O ports at desired place on wall/table.

7) Agency has to supply network Switches which should be compatible with existing switches.

8) Installation and testing of all ports shall be done by the agency.

9) The quoted value shall be inclusive of all labour efforts, materials, taxes, wastages. etc and nothing extra is payable.

10) The work will be awarded as a full project for supply, installation, commissioning of all materials in purchase order.

Interfaces

Port Standards

Duplex Mode

Media Interface Exchange

Performance

Switching Capacity

Static MAC Addresses

CPU Memory

Power Input

Weight