Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.0 LAccepted-AOC | L1 | Accepted-AOC AOC AWARDED DUE TO L1 BIDDER | |
| 2 | L2₹46.1 L+₹1.2 L (2.57%)Rejected-Finance BOMDILA WEST KAMENG ARUNACHAL PRADESH PIN 790 001 | BOMDILA | WEST KAMENG | ARUNACHAL PRADESH | 790001 | L2 | Rejected-Finance BIDDER REJECTED DUE TO LOWEST BID VALUE |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
1 Feb 2023, 9:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL BIRENDRA SINGH
GE 859 EWS
PROVN OF CERTAIN REVENUE AND MINOR WORKS AT TENGA HAAT, HQ 5 MTN BDE CAMP, 847 FD WKSP COY AND EX 505 ASC BN AREA OF AGE B/R I AND AGE E/M UNDER GE 859 EWS
2022_MES_548267_2
8358/E8
Open Tender
Civil Works
Item Rate
180 days
TENGA VALLEY
PL REFER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE 859 EWS
₹84,000
Yes
26 Apr 2023
6 Jan 2023
2 Feb 2023
6 Jan 2023
1 Feb 2023
13 Jan 2023
Amount
Taking down Chowkhats or frames n.exc 1.5 Sq.m each (without taking off shutters from the frame) including all fittings complete all as specified and directed.
Taking down Chowkhats or frames exc 1.5 Sq.m but n exc 4 Sq.m each (without taking off shutters from the frame) including all fittings complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil complete all as specified and directed.
Excavation in trenches not exc 1.5 m in width and 1.5m in depth and getting out in hard/ dense soil complete all as specified and directed.
M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (20 mm graded stone aggregate) precast cement concrete block masonary with solid blocks exc 10 cm in width and setting in CM 1:4 etc complete all as specified and directed.
M&L for PCC (1:3:6) type C-1 (using 20mm graded aggregates) as in roof kerbs or mud stops, rounded or chamfered on edges, coping etc including necessary formwork complete all as specified and directed.
M&L for rendering 15 mm thick in CM 1:4 on concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick in CM 1:6 on concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.
Preparing newly plastered surfaces of walls and applying three coats of whitewash complete all as specified and directed.
Preparing newly plastered surfaces of walls and applying two coats of acrylic distemper or OBD over a coat of 3mm thick wall care putty complete all as specified and directed.
S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed. Note : (Brackets over 10 kg each to be measured under 'Structural Steel')
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
S&F 100mm long MS butt hinge, medium weight, cold rolled complete all as specified and directed.
S&F 75mm long MS butt hinge, medium weight, cold rolled complete all as specified and directed.
S& F Aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all as specified and directed.
S& F Aluminium anodised barrel tower bolts 100 mm long of extruded section and fixed complete all as specified and directed.
S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodized, handle fabricated type complete all as specified and directed.
S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodized, handle fabricated type complete all as specified and directed.
S&F PVC coated 25mm dia mild steel curtain rod medium weight and fixing brackets, curtain rings @ 7 Nos per metre and decorative end support etc complete all as specified and directed.
S&F Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour havimg tensile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed complete all as specified and directed.
M&L for Non-skid ceramic tiles 7 to 8 mm thick coloured tiles( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for sand filling under floors or in foundations including watering and consolidation and well ramming complete all as specified and directed.
M&L for machine pressed precast conctete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade complete all as specified and directed.
Returning , filling including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removal of surplus soil of distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point complete all as specified and directed.
Material and labour for preparation of new wooden wood based material over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Supply and fix PVC (SWR) pipes single socketed 75 mm dia in any length with rubber ring joints fixed to walls, clamps/hook for holding of pipe etc complete all as specified and directed.
Supply and fixing 15 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complete all as specified and directed.
S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including pipe chain and plug, CI brackets complete all as specified and directed.
S&F 15mm bore angle stop valves, fancy type chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions & fixed
S & F CP, fancy type 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed.
S & F in repair PVC connection 15mm dia 450 mm long with brass check nuts and washers
M&L for providing cement concrete type B1 1:2:4 (using 20 mm graded aggregate) as in re-inforced cement concrete foundation, footings, foundation beams, plinth beams, piles and mass concrete complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded aggregate) as in subbase to receive floor tiles all as specified and directed.
M&L for providing cement concrete type B1 1:2:4 (using 20 mm graded aggregate) as in re-inforced cement as in columns, pillars etc complete all as specified and directed.
Supply and fix Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.
All as per item no 39 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.
M&L for PCC (1:2:4) type B-1 (using 20mm graded aggregates) as in roof kerbs or mud stops, rounded or chamfered on edges, coping etc including necessary formwork complete all as specified and directed.
Use and waste of form work to sides of concrete sides of columns, pillers, piers, post and struts, slab supported on walls etc for fair finished surface complete all as specified and directed.
M&L for 100mm thick PCC type D-2 (1:4:8) using 40 mm graded aggregates as in sub-base complete all as specified and directed.
M&L for 75mm thick PCC type D-2 (1:4:8) using 40 mm graded aggregates as in sub-base complete all as specified and directed.
M&L for 20 mm thick screed bed in CM 1:4 for laying floor tiles finished rough complete all as specified and directed.
M&L for chequered cement concrete pre-printed colour tiles 20cmx20cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with mixture of white and grey cement in equal proportion and no pigment complete all as specified and directed.
S&F for anodised aluminium snap grid of size of 605x605 mm frame work for false ceiling with aluminium anodised section size, wall angle 40mmx25mmx2mm thick main/ cross T section 36.5mmx25mmx1.4mm and 23.5x26.4x1.4mm and suspended with 6mm dia GI wire respectively with and including 8mm thick laminated gypsum board fixed to aluminium snap grid all as per clause 10.38.1 of SSR part 1 and as per manufacturers instructions complete all as specified and directed.
M&L for rendering 10 mm thick in CM 1:4 on concrete surfaces, finished rough complete all as specified and directed.
S&F 6mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to wall surface etc complete all as specified and directed.
S&F 4mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to ceiling surface etc complete all as specified and directed.
M&L for 2nd class hard wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails having sectional area exc. 3 sqcm and n.exc 6 sqcm, complete all as specified and directed.
M&L for screed bed or bedding layer of 15mm thick in cement mortar 1:4 for laying floor tiles etc all as specified.
M&L for granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in CM 1:3 and pointing with white cement 1:2 using marble dust with admixture of pigment to match with marble of any shade complete all as specified and directed.
M&L for Non-skid ceramic tiles 7 to 8 mm thick coloured tiles( square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces complete all as specified and directed.
S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified.
M & L for 50 mm thick 2nd class Hard wood clean sawn boarding with butt joints fixed with nails in any situation complete all as specified and directed.
S&F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue , pinned at joints complete all as specified and directed.
Supply and fix 2nd class hard wood plain framed panelled shutters 35 mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer complete all as specified and directed.
S&F 600mm MS skeleton tower bolts with steel sheets pressed plates and staples , stove enamelled black and MS brfight bolt all as specified and directed.
S&F 375mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.
Supply and fix 30mm thick 2nd class hardwood glazed and skeleton shutters divided in to squares, with plain chamfered or rounded, mitred and rebated sash bars any numbers ,prepared to receive glass, gauge etc. with , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. size of members of shutters as specified SSR Part-I, section 8, clause 8.20(b) complete all as specified and directed.
Supply and fixing MS window guard bars, window frames etc articles confirming to Fe 415-0 or Grade -E complete all as specified and directed.
S & F aluminium alloy, anodised, sliding door bolts 300 mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed
S&F pre coated mild steel floor door stopper tongue anodised 140mm length including vulcanised rubber piece complete all as specified and directed.
Supply and fix in repair PVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed.
Excavation in post holes each n exc 0.5 cum and getting out in hard/dense soil, returning, filling in and ramming earth in layers n exc 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface all specified and directed.
M&L PCC (1:3:6) type C-2 (using 40mm graded aggregate) as in foundation filling and mass concrete etc all as specified & directed.
S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all specified and directed.
S&F MS Screw bolts 12 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, embeded in RCC post, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10 cm but n. exc 15 cm long all specified and directed.
S&F Mild Steel Flats 40 x 6 mm thick in wind ties for roof inclduding securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc conforming to Fe-290 Gde E-165 all specified and directed.
Material supply only MS galvanised chain link fencing any size or type all specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards rails, straining bolts, etc, including provision of binding wire all specified and directed.
S&F 10 mm dia round bars as stiffening member in fencing including securing the fencing confirming to Fe-410-W (gde-E-250) qualiity A or Fe-290 (Gde-E-165) as link all specified and directed.
M&L for applying two coat of Black Japan paint over a coat of red oxide primer on steel surfaces of any descripition over 10 cm width or girth etc complete all specified and directed.
S&F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to entanglements aprons of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc all specified and directed.
M&L for point wiring with PVC insulated unsheathed stranded copper conductor, FRLS grade of size 1.5sqmm in and including PVC casing capping of required size surface type with all accessories including PVC for housing /mounting brackets, switches, sockets etc including 1.5sqmm PVC insulated unsheathed stranded copper conductor 1100 volts grade green in colour as earth continuity for one light/ fan point controlled by one switch all as specified and directed.
All as per item No 77 here-in-before but for one 3 Pin 5 Amp switch outlet controled by one switch on the independent board complete all as specified and directed.
All as per item No 77 here-in-before but for 3 pin 15 Amps socket outlet independant board drawn from DB and including PVC insulated multi stranded copper conductor 2.5 sqmm 1100 volts FRLS grade and earth continuity wire 2.5 sqmm PVC insulated copper wire (Green) FRLS grade including PVC casing and capping complete all as specified and directed.
Supply and fix switch piano flush type single pole one way 5 Amp 240 volts complete all as specified and directed.
S&F switch socket combination 2 in 1 , 3 pin, 5 Amp, flush type , 240 volts complete all as specified and directed.
S&F switch socket combination 2 in 1 , 5 pin, 15 Amp, flush type , 240 volts complete all as specified and directed.
S&F ceiling rose surface bakelite 65 x 50 mm two to three terminals complete all as specified and directed.
Supply and fix lamp holder, insulated body, with back plate for angular batten fittings complete all as specified and directed.
S&F 1x10 watt LED lamp, CDL, B-22 cap, (Pin type),230 W, PF not less than 0.85 (min). of Make Havells or equivalent model of Make Bajaj / Phillips/ Havells/ Eveready/ C&G
S&F LED light fitting 1x20 Watt, 220 V, AC decorative ultra slim polycarbonate LED lighting fixtures with high lumen output environmental friendly, energy efficient connecting up with three core flexible copper conductor cable of suitable size from ceiling rose.
Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular multistranded 6 sqmm complete all as specified and directed.
S&F 1x9 W/ 1x 10 W bulkhead luminaire incl LED light driver holder connecting up with three core flexible cable of suitable size.
S&F MCB DB CRCA sheet powder coated SPN 8 way double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables fixed on suitable size of PVC board incl taking out existing unsv DB of any size and making good disturbed surface to match with existing complete all as specified and as directed. Make: Havells/L&T/ABB/Schneider/Legrand
S&F MCB single pole having braking capacity 10 KA, 6 to 32 Amps 240 volts including taking down unserviceable complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand
S&F MCB SPN having braking capacity 10 KA. 32 Amp, 240 volts C curve including taking down unserviceable complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand
Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth lead of 25x3 mm dia GI strip by means of bolts, nuts, check nuts and washers of galvanised iron. Earth strip protected by GI pipe 40 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge and earth testing on completion.
M/S R N ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .