CO Operation theater in Trauma Center of Nalagarh Govt Hospital Distt Solan HP SH Prov EI therein

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group-C

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x1.5 Sq. mm.

2x4.0 Sq. mm.

Wiring for circuit / sub-main with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. (4X4+2X4)HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit / sub-main with 3x25+1x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (3x25+3x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.

3x1.5 Sq. mm.

3x4.0 Sq. mm.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-

25 mm. dia

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.

Supplying and fixing 32 Amps, 240 volts power unit, 2-pole & earth socket and switch on surface or in recess complete with connections testing and commissioning etc. as required. Make:-Legrand ,Havells,Anchor,Panasonic or any other approved by Engineer-in-Charge.

Providing and installation of following surface mounting slim square type LED downlight in white finish with anti glare polycarbonate diffuser and energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, Bajaj,C&S, Panasonic or any other approved by Engineer-in-Charge.

Providing and installation of following surface mounting slim square type LED Panles with extruded aluminium heat sink, with anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required. Make: Philips, Syska, Bajaj,C&S, Panasonic,Havells,or any other approved by Engineer-in-Charge

LED Panel 36W(2'x2')

Providing and installation of following type of LED batten (Commercial Type) with aluminium housing provided for efficient heat dissipation, with anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required. Make: Philips, Syska, Havells, Bajaj,Panasonic or any other approved by Engineer-in-Charge.

LED Batten Light 20W

Supplying and fixing of following LED bulk head fitting with all accessories including making connections, testing etc. as required. Make C&S, Philips, Panasonic or any other approved by Engineer-in-Charge.

LED bulk head 6W

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:- 32 mm dia. G.I. pipe, heavy class

Supplying and fixing of street light 25 W LED IP65, versatile pressure die-cast alluminium IP 65 with high power LEDs as light source & exclusively designed polycarbonate cover alongwith electronic driver, complete with all accessories including making connections, testing etc. as required. Make:-C&S, Havells,Philips,Panasonic, SYSKA or any other approved by Engineer-in-Charge.

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying and fixing of fancy Mirror/Dressing lights containing LED/ CFL lamp holder(s) of all sizes and shapes, complete with all accessories but excluding LED/CFL lamp including making connections, testing etc. as required. Make: Philips ,Havells, Panasonic or any other approved by Engineer-in-Charge.

Supplying and fixing of fancy wall bracket containing thread type CFL/LED lamp holder(s) of all sizes and shapes, complete with all accessories but excluding CFL/LED lamp including making connections, testing etc. as required. Make:Havells ,Philips, Panasonic or any other approved by Engineer-in-Charge.

Providing and installation of LED 5 W retrofit lamp B-22/E-27 holder base with polycarbonate body and aluminium heat sink; suitable for input voltage: AC 220-240 V, 50/60Hz, including mounting in existing fixture, testing etc. as required complete in all respects. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-

Ceiling Fan 1200 mm sweep, Category-A

Ceiling Fan 1400 mm sweep, Category-A

Ceiling Fan 900 mm sweep (make Havelles, Bajaj, Crompton Greaves, Usha,or any other approved by Engineer-in-charge.)

Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required.

Providing and installation of Light duty, plastic body, Ventilating Fan, Light duty, (Plastic body) 250 mm sweep in the existing opening, by means of suitable rag-bolts/nuts, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required complete in all respects to the satisfaction of the Engineer-in-Charge:- Make: Havells, Bajaj, Crompton Greaves, Usha, or any other approved by Engineer-in-charge.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Heavy duty, 300 mm sweep

SITC of Cold Inverter type AC copper condenser including stabilizer and making connections, testing etc.complete in all respects.Make Voltas,Blue Star,LG, O General, Daikin, Mitsubishi or any other approved by Engineer-in-charge..

Supplying and fixing of Copper refrigerant piping with sleeve 1/2x1/4 inches with control cabling beyond 0 running meter for (Hi-wall split unit) with sleeves insulation etc. complete in all respects with best satisfaction of Er-in-Charge.

Supplying and fixing of PVC drain pipe for (Hi-wall split unit) complete in all respects with best satisfaction of Er-in-Charge.

Supplying and fixing of M.S stand for out door unit of suitable size (Readymade) complete in all respects with best satisfactions of Er-in-Charge.

Supplying and fixing of following way Segregated triple pole and neutral, IP-42 double door sheet steel MCB distribution board, 415 volts,7 segment on surface / recess, with provision to mount 4 module MCCB incomer, 4 module sub-incomer in each phase and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required. Make Legrand, Schenider, Havells,L&T,ABB complete in all respect as approved by Engineer-in-Charge.

12 way, MCCB+12+36

Providing and fixing following rating and breaking capacity 4-Pole MCCB 18 KA Thermal release having (O/L & S/C) protection with spreader terminal and ROH in the existing cubical panel board incuding drilling holes in the cubical panel, making connections etc. as required. Make L&T, Schneider, Siemens, ABB Legrand and any other approved by Engineer-in-charge .

63 Amp. MCCB 4-Pole 18 KA

100 Amp. MCCB 4-Pole 18 KA

Providing and fixing following size SS enclosure for MCCB 4 pole as required. Make L&T, Schneider, Siemens, ABB Legrand and any other approved by Engineer-in-charge .

MCCB Enclosure suitable upto 125 Ampere MCCBs

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Cat.-A

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-MCBDP-63 Amp Cat-A

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amps. Cat-A.

Supplying and erection of sheet metal cubical panel of suitable dimension with 5 cm. Variation made from (50mmx50mmx6mm) thick m.s angle iron frame, covered with 1.6mm thick m.s sheet duly welded an five side and front side hinged complete with locking arrangment with sufficient nos vertical and horizontal intermediate switch gear housing compartment including 1 Nos MCCB 125 Amp. 4 pole as incomer with 1 Nos Change over 125 Amp,1 Nos 100 Amp MCCB, 1 Nos 63 Amp MCCB, Copper Bus Bar 200 Amp 1 Nos, indicating lamp 1 set complete in all respects.The cubical panel have cable entry box at one or two side i/c power coated painting and bonding to the existing earth etc.

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Supplying and laying 8 SWG Copper wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:-25 Ltr.capacity water heater (Cat.A)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-Armoured cable 70 sq. mm (3.5 core)

Shyam Radio and Electrical

Nand Ram