Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.0 LAccepted-Finance | ₹7.0 L | L1 | Accepted-Finance Lowest Bidder |
| 2 | L2₹7.2 LRejected-Finance 1 PNETH CHOORI CHAMBA CHAMBA HIMACHAL PRADESH 176311 UDYAM HP 02 0007745 | CHAMBA | HIMACHAL PRADESH | 176311 | ₹7.2 L | L2 | Rejected-Finance L2 |
| 3 | L3₹7.2 LRejected-Finance | ₹7.2 L | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | vikul thakur L1 | Sachin Chauhan L3 | sanjeev kumar L2 |
|---|---|---|---|---|---|---|
| 1.00 | Clearing Jungle including uprooting of rank vegetations, grass, brush wood, trees and saplings of grith upto 30 cm girth 1 meter above ground and removal of measured at a height of rubbish upto a distance of 20 mtr outside the periphery of the area cleared. | 150 | Sqm. | 30 ₹4,500 | 40 ₹6,000 | 50 ₹7,500 |
| 2.00Laying, butt welding and testing of ISI marked steel tubes plain ended in trenches of following dia as per IS 1239-2001, including jointing the pipes with butt welding at both the ends according to relevant BIS standards/approved specifications including manufacturing reducers/tapers, all short pices and bends as per site requirement and made from parent tubes ( to be measurer and paid alongwith pipes. Bends shall be manufactured in such a way that not more than 111/4 degree deflection is caused by a single cut and internal dia is not reduced including hydraulic testing to the entire satisfaction of Engineer-in-charge. The damaged portion of galvanization due welding shall be provided with anticorrosive treatment by providing two coats of bituminous paint over priming coat as per AWWA specification C-203-1978. (Earth work to be measure & paid for separately). | ||||||
| 2.01 | 65 mm dia. | 60 | Joints. | 390 ₹23,400 | 440 ₹26,400 | 410 ₹24,600 |
| 2.02 | 80 mm dia. | 80 | Joints. | 450 ₹36,000 | 460 ₹36,800 | 470 ₹37,600 |
| 3.00Providing and supplying of Cast iron Sluice valve of following sizes Karta/ BIR/ Kirloskar make ISI marked and capable of with standing the normal pressure as per IS: 14846-2000 class PN-1 brass stel spindle complete with accessories in all repest with Table-17 MS flanges and to the entire satisfaction of Engineer-in-charge with in all lead and lifts. | ||||||
| 3.01 | 80 mm dia. | 10 | Nos. | 14,000 ₹1.4 L | 14,000 ₹1.4 L | 13,900 ₹1.4 L |
| 3.02 | 100 mm dia. | 1 | Nos. | 17,000 ₹17,000 | 17,100 ₹17,100 | 17,200 ₹17,200 |
| 4.00Providing and rep;acing of Cast steel Sluice valve of ASA 300 kirloskar/ leader make ISI marked and capable of with standing the normal pressure as per IS: 14846-2000 class PN-1 brass stel spindle complete with accessories in all repest with the entire satisfaction of Engineer-in-charge with in all lead and lifts. | ||||||
| 4.01 | 80 mm dia. | 2 | Nos. | 69,000 ₹1.4 L | 73,000 ₹1.5 L | 72,000 ₹1.4 L |
| 4.02 | 100 mm dia. | 1 | Nos. | 98,000 ₹98,000 | 1,00,000 ₹1 L | 1,02,000 ₹1.0 L |
Tender Value
₹6.5 L
EMD Value
₹13,000
Closing Date
23 Mar 2026, 11:00 amClosed
Executive Engineer
JSV Division Jubbal
RR damages of LWSS Brall in GP Brall in Tehsil Rohru Distt Shimla HP SH Providing interconnectivity to various civil structures at stage 1st. Chanu
2026_HPIPH_131547_6
JBL-SML-09-718
Open Tender
Civil Works
90 days
Jubbal
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
₹13,000
7 Apr 2026
13 Mar 2026
23 Mar 2026
13 Mar 2026
23 Mar 2026
13 Mar 2026
Clearing Jungle including uprooting of rank vegetations, grass, brush wood, trees and saplings of grith upto 30 cm girth 1 meter above ground and removal of measured at a height of rubbish upto a distance of 20 mtr outside the periphery of the area cleared.
Laying, butt welding and testing of ISI marked steel tubes plain ended in trenches of following dia as per IS 1239-2001, including jointing the pipes with butt welding at both the ends according to relevant BIS standards/approved specifications including manufacturing reducers/tapers, all short pices and bends as per site requirement and made from parent tubes ( to be measurer and paid alongwith pipes. Bends shall be manufactured in such a way that not more than 111/4 degree deflection is caused by a single cut and internal dia is not reduced including hydraulic testing to the entire satisfaction of Engineer-in-charge. The damaged portion of galvanization due welding shall be provided with anticorrosive treatment by providing two coats of bituminous paint over priming coat as per AWWA specification C-203-1978. (Earth work to be measure & paid for separately).
65 mm dia.
80 mm dia.
Providing and supplying of Cast iron Sluice valve of following sizes Karta/ BIR/ Kirloskar make ISI marked and capable of with standing the normal pressure as per IS: 14846-2000 class PN-1 brass stel spindle complete with accessories in all repest with Table-17 MS flanges and to the entire satisfaction of Engineer-in-charge with in all lead and lifts.
80 mm dia.
100 mm dia.
Providing and rep;acing of Cast steel Sluice valve of ASA 300 kirloskar/ leader make ISI marked and capable of with standing the normal pressure as per IS: 14846-2000 class PN-1 brass stel spindle complete with accessories in all repest with the entire satisfaction of Engineer-in-charge with in all lead and lifts.
80 mm dia.
100 mm dia.
Providing and rep;acing of Cast steel Sluice valve of ASA 600 kirloskar/ leader make ISI marked and capable of with standing the normal pressure as per IS: 14846-2000 class PN-1 brass stel spindle complete with accessories in all repest with the entire satisfaction of Engineer-in-charge with in all lead and lifts.
65 mm dia.
Providing and rep;acing of Cast steel Non Return valve of ASA 600 kirloskar/ leader make ISI marked and capable of with standing the normal pressure as per IS: 14846-2000 class PN-1 brass stel spindle complete with accessories in all repest with the entire satisfaction of Engineer-in-charge with in all lead and lifts.
100 mm dia.
Providing and fixing of 90 degree bend in 80mm dia G.I pipes, fabricated from G.I pipes including cutting, bending, welding, grinding and finishing complete in all respects.
80 mm dia.
Excavation in foundations , trenches etc., in earth work , lift up to 1.50 metres. Stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm. (fifteen centimetres) layers , when required in to plinth and sides of foundations etc., conslolidating each of the disposited layer by ramming and watering and then disposing off all excavated soil as directed with in the load of 20 mtrs. Pick and Jumper work etc. complete as per the direction of the Engineer - in - Charge.
Providing, welding and fixing M.S. plate flanges of various dia (nominal bore) of following Flange Tables confirming to IS 6392-1971 or latest with up to date ammendments to ERW after 100 mtr. pipe or as per site requirement including cutting of of pipes wherever required, welding in three layers (leak proof) confirming to specifications as prescribed in relvent I.S. Code i.e. IS 816-1969 with electrode as per IS: 814-1991 or latest as applicable with up to date ammendments with nuts, bolts & washers & specials etc. confirming to IS-1963 or latest with up to date ammendments including packing sheet i.e. asbestos fibre sheet minimum 3mm thick and painting with anticorosive paints complete in all respect in all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.
65 mm dia.
80 mm dia.
100 mm dia.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
technical_194565.pdf
techsummary_194565.pdf
finance_194565.pdf
BOQ Comparative Chart
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.33 MB
f6.pdf
Tender Documents • 0.15 MB
f8.pdf
Tender Documents • 0.70 MB
tc.pdf
Tender Documents • 0.22 MB
BOQ_194565.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
