REPAIR TO INTERNAL ELECTRIFICATION REWIRING REPLACEMENT OF LIGHT DB S ETC AT CERTAIN OTM AND OFFICER MARRIED ACCN UNDER AGE E M OF GARRISON ENGINEER SATWARI

Amount

Taking down carefully Copper aluminium point wiring light, Fan, socket or power complete including fixture & fitting such as switches, sockets or power socket complete fitting bracket holder, boards, and making good disturbed surfaces of wall and ceiling etc.

Taking down carefully unserviceable sub main wiring etc.

Taking down unserviceable DBs any type / size carefully disconnecting and making good disturbed surfaces complete all as directed.

Taking down unserviceable MCB SP/SPN/Isolator/MCCB of any rating & size including sheet metal enclosure.

M & L in replacement of Point wiring complete with 1.5 Sqmm single core unsheathed PVC insulated 1100 V, FRLS grade with multistranded copper conductor ISI marked drawn through in existing concealed / surface PVC/Steel conduit and accessories including new MS pressed steel terminal box and including replace laminated sheet 3mm thick for mounting of switches, socket regulator etc including 1.5 Sqmm PVC insulated unsheathed cable multistranded copper conductor and connecting to earth dolly for light, Fan, Plug and bell all as directed and specified by Engr-in-charge. (a) One light point controlled by one 5 Amps one way switch. Note:- PVC conduit up 01 Mtr as required at site rate deemed to be included.

All as per above item No-05 but One light point controlled by two Two way switch

All as per above item No-05 but One ceiling Fan, Exhaust Fan point controlled by one 5 Amps switch.

All as per above item No-05 but One bell/buzzer point controlled by one bell push button on independent board.

All as per above item No-05 but One 3 Pin 6 Amps socket point on the independent board.

All as per above item No-5 but One 3 pin 6 Amp socket point on the same board with other switch.

All as per above item No-5 but with 2.5 Sqmm cable for 15 Amp switch socket out let point on independent board including 2.5 Sqmm PVC insulated unsheathed cable multistranded with copper conductor earthing continuity conductor all as directed and specified by Engr-in-charge.

M & L in replacement of point wiring complete with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in existing concealed / surface PVC/Steel conduit and including terminated into suitable module Modular Metal flush Boxes of Make : Elvira Indoasian or equivalent in List of makes. including white cover plate with frame as per relevant IS for mounting switches, sockets, fan regulators etc complete all as specified and as directed for One light point controlled by one 6 Amps one way switch.

All as per above item No-12 but One ceiling Fan, Exhaust Fan point controlled by one 6 Amps switch.

All as per above item No-12 but One bell/buzzer point controlled by one bell push button on independent.

All as per above item No-12 but One light point controlled by 2 Nos ,6 amps Two way switch.

All as per above item No-12 but One 3 pin socket out let 6 Amp point on independent board

All as per above item No-12 but One 3 Pin socket out let 6 Amp point on the same board with other switch.

All as per above item No-12 but with 2.5 Sqmm cable for 16 Amps switch sockets out let point on independent board including 2.5 Sqmm PVC insulated unsheathed cable multistranded with copper conductor earthing continuity conductor.

M & L in replacement of point wiring complete with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit, and matching the white wash colour with existing colour and including terminated into suitable module Modular Metal flush Boxes of Make : Elvira Indoasian or equivalent in List of makes. including white cover plate with frame as per relevant IS for mounting switches, sockets, fan regulators etc complete all as specified and as directed for One light point controlled by one 6 Amps one way switch.

All as per above item No-19 but One ceiling Fan, Exhaust Fan point controlled by one 6 Amps switch.

All as per above item No-19 but One bell/buzzer point controlled by one bell push button on independent.

All as per above item No-19 but One light point controlled by 2 Nos ,6 amps Two way switch.

All as per above item No-19 but One 3 pin socket out let 6 Amp point on independent board

All as per above item No-19 but One 3 Pin socket out let 6 Amp point on the same board with other switch.

All as per above item No-19 but with 2.5 Sqmm cable for 16 Amps switch sockets out let point on independent board including 2.5 Sqmm PVC insulated unsheathed cable multistranded with copper conductor earthing continuity conductor.

Supply and fixing in replacement of Switch piano made of polycarbonate flush button single pole one way, 6 Amps, 240 V

Supply and fixing switch piano flush button type , single pole two way 5 Amps

Supply and fixing in replacement of Piano Bell push made of polycarbonate piano flush type 6 amps , 240 V

Supply and fixing in replacement of socket 2-in-1, 5 pin 6 Amps made of polycarbonate flush type complete all as specified and as directed.

Supply and fixing in replacement of Socket outlet 3 pin, 15 Amps flush type made of polycarbonate complete all as specified and as directed.

Supply and fixing in replacement of Switch piano made of polycarbonate flush button single pole one way, 16 Amps, 230/240 V complete all as specified and directed.

Supply and fixing in replacement of Switch modular type of polycarbonate flush button single pole Single module, 6 Amps, 240 V

Supply and fixing in replacement of Switch Modular made of Polycarbonate flush button single pole two way 6 Amps, 240 V.

Supply and fixing in replacement of Switch Modular made of polycarbonate flush button single pole single module, 16 Amps, 230/240 V

Supply and fixing in replacement of Bell push modular made of polycarbonate piano flush type 6 amps , 240 V

Supply and fixing in replacement of Socket Modular outlet 2-in-1 5 pin, 6 Amps made of polycarbonate flush type complete all as specified and as directed.

Supply and fixing in replacement of Socket outlet Modular 2-in-1 5 pin, 6 & 16 Amps flush type made of polycarbonate complete all as specified and as directed.

Supply and fixing ceiling rose 3 phase PVC polycarbonate insulated body.

Supply and fixing in replacement of modular type Fan regulator 2 Module stepped type (electronic) made of polycarbonate for 1200/1400mm sweep AC ceiling fan.

Supply and fix in replacement of fan regulator electronic flush type on the existing phenolic laminated sheet etc 250 volts AC 50 HZ,100 Watts, 4 step complete all as directed.

Supply and fix in replacement of call bell 240 V, 50 Hz sinlge pole complete all as specified and directed.

Supply & fixing in replacement of Ding Dong door bell, AC 230/240 volt single phase complete all as specified and directed.

Supply & fixing in replacement of Switch socket combination 2-in-1 5 pin 6 Amps made of polycarbonate flush type complete all as specified and as directed.

Supply & fixing in replacement of Switch socket combination 2-in-1 3 pin 6 and 16 Amps made of polycarbonate flush type complete all as specified and as directed.

Supply & fixing in replacement of Modular type Switch socket combination 3 pin 6 Amps amp' flush type made of polycarbonate flush type complete all as specified and as directed.

Supply & fixing in replacement of Modular type Switch socket combination 16A, 6 pin, 3 module made of polycarbonate flush type complete all as specified and as directed.

Supply & fixing in replacement of Socket outlet 2-in-1 3 pin, 6 & 16 Amps flush type made of polycarbonate complete all as specified and as directed.

Supply & fixing in replacement of switch socket combination 5 in 1, 6 and 16 Amps flush type made of polycarbonate universal controlled by one switch complete all as specified and as directed.

Supply & fixing in replacement of Fan regulator stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc(electronic ) made of polycarbonate for 1200/1400mm sweep AC ceiling fan complete as per existing model.

Supply and fix in replacement of lamp holder pendant/angle type insulated body with back plate all as directed and specified by Engineer-in-Charge.

Supply and fix in replacement of LED lamp suitable for B22 holder of capacity 7 Watt.

Supply and fix in replacement of existing unserviceable T/L fitting on existing wall with New LED Batten for T - 8 LED tube light 18/20 watts with necessary braket,clamps ,incl. bolts, nuts & washers for fixing arrangement etc complete all as specifed and directed by Engineer-in-charge.

Supply and fix in replacement of LED tube rod light 18/20 watts T -8 with necessary fixing arrangement etc complete all as specifed and directed by Engineer-in-charge

Supply and fix in replacement of Recess mounting 2x2 LED luminarie, 36 W deep drawn CRCA housing with high power LED premium white powder coated frame blends seamlessly with ceiling layout, suitable for 600x600 mm modular ceiling grid and also can be suspended with provided kit, complete fitting with all fixing arrangement all as specified and directed by Engr-in-Charge.

Supply and fixing round shape 9/10 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

All as per item No 55 above here-in-before but 12 watt complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing in replacement of energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed.

Supply and fixing in replacement of bldg security LED light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing of energy saving new generation Astra spot round LED light white colour 25-30W wall /ceiling mounted adjustable type single fitting with opal diffuser complete all as specified and directed. Make : Havells / Crompton/ Philips/ Wipro/jaquar

Supply and fixing of energy saving new generation Astra spot round LED light white colour 25-30W wall /ceiling mounted adjustable double fitting type with opal diffuser complete all as specified and directed. Make : Havells / Crompton/ Philips/ Wipro/jaquar

Supply and fix in replacement of High efficacy 4' x 1' recess LED flat panel with high brightness LED for glare-free homogenous illumination also for POP ceilings (supplied with wedge brackets) complete with all accessories including necessary connection all as specified.

M & L in repairs of Earth condinuity conductor Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors on wall above the ground (G +3 floor) complete all as specified and directed.

M & L in repairs of Earth condinuity conductor or main earth lead fixed to wall/roof/floor on batten/recess/GI pipe or chases with 32x6 mm galvanised iron strip (G +3 floor) complete all as specified and directed.

M & L in repairs of test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hex head fixed on wall complete all as specified and directed by Engineer-in-charge.

M & L in replacement of Air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and directed.

M & L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded and including suitable size of PVC Concealed conduit and all accessories fixing on walls / roofs / ceiling etc. earth dolly, terminated in terminal box all as specified and directed by Engr-in-charge for 2x4 sq mm and 1x4 sq mm as earth wire

All as per item No 67 above but 2x6 sq mm and 1x6 sq mm as earth wire

All as per item No 67 above but 2x10 sq mm and 1x10 sq mm as earth wire

All as per item No 67 above but 4x6 sq mm and 1x6 sq mm as earth wire

All as per item No 67 above but 4x10 sq mm and 1x10 sq mm as earth wire

Supply & fix in replacement of Distribution Box MCB TPN 4 way double door suitable for and including MCB four pole as incomer and out going MCBs and should be IP 43 protected with Copper BusBars, Neutral Links, Earthing bar all as specified and directed. including taking down old UNSV DB/MCB any type. Note:- (i). MCBs shall be measured and paid separately. (iii) TPN DB and MCB should be of same make.

Supply & fix in replacement of sheet metal enclosure MCB distribution board. Single pole & neutral (SPN) 240 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification.

Supply & fix in replacement of sheet metal enclosure MCB distribution board. Single pole & neutral (SPN) 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification.

Supply & fix in replacement of sheet metal enclosure MCB distribution board. Single pole & neutral (SPN) 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification.

Supply & fix in replacement of MCB single pole (SP) 240 volt 06-32 Amp for inductive load connected through cable lugs of suitable size complete all as directed and specified.

Supply & fix in replacement of MCB Single pole and neutral 240 volt 32 Amp for inductive load connected through cable lugs of suitable size complete all as directed and specified.

Supply & fix in replacement of MCB Single pole and neutral 240 volt 40 Amp for inductive load connected through cable lugs of suitable size complete all as directed and specified.

Supply & fix in replacement of MCB Four pole 415 volt 63 to 100 Amp 415V 10KA 'C' curve miniature circuit breaker for inductive load connected through cable lugs of suitable size complete all as directed and specified.

Supply & fix in replacement of sheet metal enclouser with Single pole and neutral SPN MCB DB 2 way complete with single door with 240 V 50 Hz.

Supply & fix in replacement of MCB Single pole and neutral 240 volt 25-32 Amp for inductive load connected through cable lugs of suitable size complete all as directed and specified.

Taking down the defective ceiling fan of any sweep and make after disconnecting electrically & mechanically and transporting to the work shop dismantling, examine & carry out the repairs as required and brought back to site, re-fixing, testing in all respect for smooth running and comprising of the following:- (a) Servicing/overhauling the ceiling fan by thoroughly cleaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of super enameled varnish over the winding to improve the insulation value complete. (b) M& L for opening, cleaning, drying and re-winding the burnt/short circuited winding with same guage supper enameled copper wire to maintain speed at load. (c) M&L for preparing surface scrabing, finishing and Painting of ceiling fan by applying one coats of synthetic enamel paint after preparation of surface complete. (d) Replacement of ball bearing suitable for ceiling fans existing sweep & Make/Model

Taking down the repairable exhaust fan/Wall mounting fan/Pedestal fan of size 300-450 MM sweep, any make, single phase, 230 volts, 50 hz, AC after disconnecting electrically and mechanically and transporting to the work shop dismantling, examine & carry out the repairs as required and brought back to site, re-fixing, testing in all respect for smooth running and comprising of the following:- (a) Servicing/overhauling the exhuast fan by thoroughly clelaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing. (b) M& L for opening, cleaning, drying and re-winding the burnt/shourt circuited winding with same cauge supper enameled copper wire to maintain speed at load including applying one coat of super enameled varnish over the winding to improve the resistance value. (c) M&L for preparing surface scrbing, finishing and Painting of Exhaust fan by applying one coat of synthetic enamel paint after preparation of surface complete. (d) Replacement of ball bearing suitable for exhaust fans any sweep as per existing Make & Model.

Supply & fixing in replacement of ball bearing suitable for ceiling fans 1200 / 1400mm dia sweep.

Supply & fixing in replacement of ball bearing suitable for exhaust fans 300/450mm dia sweep.

Supply & fixing in replacement of Capacitor 2.5 mfd for ceiling fans.

Supply & fixing in replacement of Capacitor 4 mfd for exhaust fans.

Supply & fixing in replacement of gun metal bush suitable for ceiling fans of 1200/1400 mm sweep.

Supply & fixing in replacement of gun metal bush suitable for exhaust fans of 300/450 mm sweep.

Supply & fixing in replacement of three core flexible wire 1 Sqmm for connecting up ceiling fans , exhaust fans/wall mounting fan etc.

Supply & fixing in replacement of the wheel type rubber bush with nut,bolt,washers,locking clip etc. suitable for hanging the ceiling fans

Supply & fixing in replacement of the mounting clamps with nut, bolt, washers, locking clip etc complete suitable for fixing at the top of down rod suitable for fixing the ceiling fan.

Supply & fix in replacement of ceiling fan down rod of MS pipe 15mm bore 1.2/1.5 Mtr length including cutting/threading making tide for fixing providing check nuts wachers and clamp with rubber bush etc complete.

Supply & fix in replacement of Casing Caping of size 20 mm, ISI marked complete all as specified.

Supply and fix exhaust fan made of steel body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified.

Taking down the existing conduit and copper wire before Supplied & fixed in replacement of Rigid non-metallic PVC conduit of size 20mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, after fixing of conduit inserting the existing copper wire and connection as per existing complete all as specified and directed etc.

All as per ser item No 97 above here-in-before but conduit size 25 mm dia

All as per ser item No 97 above here-in-before but conduit size 32 mm dia

M&L in replacement of PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and directed.

All as per ser item No 100 but 175 x 100 x 50 mm deep

All as per ser item No 100 but 200 x 150 x 50 mm deep

M&L in replacement of Modular type White cover plate with frame, 1 module as per existing make and model complete all as specified.

All as per ser item No 103 but 2 module

All as per ser item No 103 but 3 module

All as per ser item No 103 but 4 module

All as per ser item No 103 but 6 module

All as per ser item No 103 but 8 module

M&L in replacement of Modular type Metal flush box 1/2 module complete all as specified.

All as per ser item No 109 but 3 module

All as per ser item No 109 but 4 module

All as per ser item No 109 but 6 module

Supply & fixing in replacement of Capacitor 2.5 mfd 220 volts AC 50 Hz all as specified and as directed by the Engr-in-charge

Supply & fixing in replacement of Capacitor 3.15 mfd 220 volts AC 50 Hz complete all as specified and directed.

Supply & fixing in replacement of Laminated sheet cover hylam ISI marked 3mm thick including cutting of sheet for fixing switches/sockets as required at site incl suitable size screws - 04 Nos for fixing on existing MS sunken boxes of size 9'' x 5'' complete all as specified and directed .

Description all as per sri item No 115 but of size 5'' x 5''.

Description all as per sri item No 115 but of size 12'' x 10''.

M & L in replacing of electronic LED driver 40W for panel type fitting of suitable size as per existing model complete all as specified.

M & L in replacing of electronic LED driver 29W to 36 Watt for panel type fitting of suitable size as per existing model complete all as specified.

M & L in replacing of LED driver 9/10/11W/15W/20W fitting of suitable size as per existing model complete.

M & L in replacing of LED tube rod 18/20W fitting of suitable size as per existing model complete.

M & L in replacing of LED tube rod 10/12W fitting of suitable size as per existing model complete.

Supply and fixing in replacement of LED light fitting 1 x 20 Watt, 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Repair/ replacement of OT light wiring suitable for (Sims Prima 84 R Double Dome) as per existing Dome Diameter :- 55 Cm, with control panel incl driver connection, (Rotation: 360 Degree ) complete all as specified and directed.

Taking down the existing Operation Theater LED lights with complete fittings carefully and checking serviceability and supply and fixing in replacement of unserviceable existing LED's complete sets of OT Nos 03 and after repair fixing at the same complete all as specified and directed.

Taking down the existing unserviceable controller device of OT light, supply and fixing in replacement of new controller device (OT light driver input AC 220-240 Volts, 50 HZ and out put DC 12 Volts, 20 Amps ) as per existing make & model size complete all as specified and directed.

S & F in replacement of power supply display setting board of OT light as per existing Make & Model size complete all as specified and directed.

Repair of UPS capacity 600 Watts any type complete all as specified.

Supply and fixing in replacement of unserviceable battery of 72-74 AH, 12 Volts, Make Exide power/Amron/Amco.

M & L for galvanised steel earthing complete with 60 cm x 60 cm x 6 mm thick galvanised steel earth electrode and 04 mm dia galvanised earth lead wire burried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to earth lead 4.0 mm dia GI wire protected by 15 mm bore light grade galvanised iron pipe and other and connected to test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron wire mesh, charcoal and common salt in alternater of 15 cm complete thickness all around the GI plate electrode complete with earth pit PCC 1:3:6 type CI and RCC cover and necesary excavation and earth work in hard/dense soil and disposal of spoil to a distance not exc 50 mtr and necessary testing complete all as shown in electorical plate No 03 connected to earthing test point including following elements/works all as specified.

M & L for galvanised steel earthing complete with 60 cm x 60 cm x 6 mm thick galvanised steel earth electrode and 32x6 mm dia galvanised earth strip lead burried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to earth lead 32x6 mm dia GI strip protected by 40 mm bore light grade galvanised iron pipe and other and connected to test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron wire mesh, charcoal, common salt and chemical powder in alternater layer of 15 cm complete thickness all around the GI plate electrode complete with earth pit PCC 1:3:6 type CI and RCC cover and necesary excavation and earth work in hard/dense soil and disposal of spoil to a distance not exc 50 mtr and necessary testing complete all as shown in electorical plate No 03 connected to earthing test point including following elements/works all as specified.

Material and labour for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for Lightening spike coping / foundation on roof including necessary form work all as specified and directed by Engineer-in-charge.

Supply and fixing ceiling fan complete with blade, down rods, and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and connected from ceiling rose/ connector with & including suitable size flexible copper conductor PVC insulated sheathed cord, complete.

Supply and fixing in replacement of Fancy type LED fitting 1x7 Watts E27 LED light frosted glass with chrome finishing wall lamp fixture height 250mm complete all as specified and directed. Make Jaquar Cat part No-JNL-CHR-MB160275541A or equivalent Philips/Wipro.

Supply and fixing in replacement of Fancy type LED fitting 2x7 Watts E27 LED light frosted glass with chrome finishing wall lamp fisture hight 240mm complete all as specified and directed. Make Jaquar Cat part No-JNL-CHR-MB160275542A or equivalent Philips/Wipro.

Supply and fixing in replacement of Fancy type LED fitting 1x4/7 Watts E14 LED light opal glass with chrome finishing wall lamp fixture height 235mm complete all as specified and directed. Make Jaquar Cat part No-JNL-CHR-MB160275531B or equivalent Philips/Wipro.

Supply and fixing in replacement of foot light for step stair desk LED fitting 1x4/7 Watts, 4/5 Modulars warm white finishing complete all as specified and directed. Make Jaquar or equivalent Philips/Wipro.

S&F Vertical Distribution Board (TP&N) 4 way double door suitable for MCCB 3/4 pole of cap upto 125 Amp as incomer and out going MCBs SP and should be IP 43 protected with Copper Bus Bars, Neutral Links, Earthing bar all as specified and directed.

S&F MCCB Three pole 100 Amp, 16 KA, 415 volts with adjustable thermal settings all as spcified and ditected. Note: TPN DB and MCCB should be of same make.

M/S RAJ ENGINEERS

BMMJ TRADERS AND ENGINEERS