DEFPROC

Active

Works

Civil Works

8685/E8 SPECIAL REPAIR TO REPLACEMENT OF WOODEN WINDOW TO ALUMINIUM WINDOW AT JCOs/OR ACCN OF 21 MTN DOU UNDER GE GUWAHATI

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

Guwahati | Kamrup Metro, Assam

Amount: Refer DocsCloses: 7 Nov 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published17 Oct 2026
Submission Opens31 Oct 2026
Closes7 Nov 2026
Bid Opening9 Nov 2026

Tender Value

Refer Docs

EMD Value

₹75,600

Closing Date

7 Nov 2026, 6:00 pm

Tender Inviting Organisation

Name

GE Guwahati

Address

GE GUWAHATI, PO SATGAON, DISTT KAMRUP - 781027

Work Description

8685/E8 SPECIAL REPAIR TO REPLACEMENT OF WOODEN WINDOW TO ALUMINIUM WINDOW AT JCOs/OR ACCN OF 21 MTN DOU UNDER GE GUWAHATI

Tender Information

Tender ID

2026_MES_794603_1

Reference Number

8685/E8

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Period of Work

180 days

Location

Guwahati

Source Website

Subscribe to view

Eligibility / Pre-Qualification

AS PER NIT

Documents Required

9 documents required · 9 mandatory

Fee/PreQual/Technical

RequiredAPPLICATION FOR BID ON LETTER HEAD OF FIRM (.pdf)

RequiredSCANNED COPY OF ENLISTMENT LETTER FOR MES ENLISTED CONTRACTORS (.pdf)

RequiredSCANNED COPY OF DD OR BANKERS CHEQUE FOR COST OF TENDER (.pdf)

RequiredSCANNED COPY OF GST REGISTRATION NUMBER OF CONTRACTOR (.pdf)

RequiredSCANNED COPY OF EMD AND OTHER DOCUMENTS AS PER TENDER DOCUMENTS FOR UNENLISTED CONTRACTORS (.pdf)

RequiredSCANNED COPY OF EPF CERTIFICATE OF CONTRACTOR (.pdf)

RequiredPLEASE UPLOAD RESIDUAL WORKS OF YOUR FIRM AS ON DATE (ONLY FOR CONTRACTS OF MORE THAN RS 25 LAKHS) (.pdf)

Finance

RequiredFINANCE BID (BOQ) (.xls)

RequiredTENDER DOCUMENTS (.pdf)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Payable To

GE Guwahati

EMD Fee Amount

₹75,600

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

17 Oct 2026

Published

17 Oct 2026

Bid Opening

9 Nov 2026

Download Starts

17 Oct 2026

Download Ends

7 Nov 2026

Submission Starts

31 Oct 2026

Clarification Period

17 Oct 2026 - 31 Oct 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (23 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Taking down chowkats or frames (without taking off shutter from the frame) not exc. 1.5 sq.m each and removing complete all as specified & as directed.	450	Each	-	-
-	Taking down chowkats or frames (without taking off shutter from the frame) exc. 1.5 sq.m but not exc. 4 sqm each and removing complete all as specified & as directed.	60	Each	-	-
-	M&L for providing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and as the directed. Note:- (i) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed	1,695	Kg	-	-
-	Supply and fixing powder coating of any colour (thickness of powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. Note:- (i) Labour charges for fixing of glass is inclusive in the unit rate quoted. Glass shall be measured and paid seperately at supply only rates. (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed	660	Sqm	-	-
-	Supply only 4mm thick Sheet glass frosted one side , ordinary quality fixed with aluminium frame work n exc 0.5 sq. m in each pane complete all as specified and as directed.	90	Sqm	-	-
-	S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.	210	Sqm	-	-
-	S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.	35	Sqm	-	-
-	M&L for 4 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beads in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.	430	Sqm	-	-
-	S&F mild steel hold fasts; for securing chowkhats and similar small articles conforming to Fe-290 Gde-E-165 incuding treating hold fast with tar or coal tar black paint, sanding complete all as specified and as directed.	180	Kg	-	-
-	M&L providing plain cement concrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in copings, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.	6.9	Cum	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.23 MB

Work Item Documents

BOQ_891258.xls

BOQ • 0.40 MB

8685TENDER.pdf

Tender Documents • 0.87 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Taking down chowkats or frames (without taking off shutter from the frame) not exc. 1.5 sq.m each and removing complete all as specified & as directed.

450

Each

Taking down chowkats or frames (without taking off shutter from the frame) exc. 1.5 sq.m but not exc. 4 sqm each and removing complete all as specified & as directed.

Each

M&L for providing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and as the directed. Note:- (i) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

1,695

Supply and fixing powder coating of any colour (thickness of powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. Note:- (i) Labour charges for fixing of glass is inclusive in the unit rate quoted. Glass shall be measured and paid seperately at supply only rates. (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

660

Sqm

Supply only 4mm thick Sheet glass frosted one side , ordinary quality fixed with aluminium frame work n exc 0.5 sq. m in each pane complete all as specified and as directed.

Sqm

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

210

Sqm

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Sqm

M&L for 4 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beads in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.

430

Sqm

S&F mild steel hold fasts; for securing chowkhats and similar small articles conforming to Fe-290 Gde-E-165 incuding treating hold fast with tar or coal tar black paint, sanding complete all as specified and as directed.

180

M&L providing plain cement concrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in copings, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

6.9

Cum