PROVN OF PARKING SHED FOR 3xB VEH (ALS) ,PROVN OF 2

Amount

Surface excavation not exceeding 30cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum by demolition of PCC floor of thickness overall 30cm and earth work in hard/dense soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundations,laying cables,pipe lines,etc and getting out in soft/ loose soil complete all as specified and directed.

Excavating over areas n exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed.

All as per item No.4 above but exc 1.5 m deep and n. exc 3 m deep complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm of soft loose soil,complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L PCC (1:4:8) type D-2, (using 40mm graded stone aggregate) as in foundations, filling, mass concrete etc complete all as specified and directed.

M&L PCC ( 1:3:6) type C-2 (using 40 mm graded stone aggregate), as in sub base of floor complete all as specified and as directed.

M&L RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in foundations, including rafts,footings,plinth beams; etc comlpete all as specified and directed.

M&L RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in slabs, supported on walls beams and columns in floors, roofs, landings, balconies, canopies, deck slabs,in shelves and the like including slabs of septic tank, soak well etc complete all as specified and directed

M&L RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed.

M&L Providing RCC (1:1.5:3) type A-1 (using 20mm graded stone aggregate) as in cover slabs for manholes, etc and set in CM (1:4) with plain fair faces incl chamfered, weathering, throating etc incl necessary form work complete all as specified and directed.

M&L PCC (1:2:4), type B-1, (using 20mm graded stone aggregate) as in cills, seismic and other similar bands, plinth courses, copings, bed plates and similar articles including weathering, slightly rounded or chamfered angles and throating as directed with necessary form work,complete all as specified and directed.

M & L 25mm thick Damp proof course to horizontal or vertical surfaces by using PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) and mixed with integral water proofing compound incl necessary formwork complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and directed.

Use and waste of form work to sides of concrete foundation, footings, base of coloumns, raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.

Use and waste of form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels. Cantilevers, shelves including supports, overhangs, etc also splays between floor and beam etc for rough finished flat surfaces of cocrete complete all as specified and as directed.

Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, for rough finished flat surfaces of concrete complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight for curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.

M&L Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM (1:6) complete all as specified and directed.

M & L Providing 50 mm thick pre cast cement concrete louvers and jallies by using PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregate) and set in CM (1:4) complete all as specified and directed.

M&L Loose filling with broken brick aggregates of gauge 80 to 150mm in soakage pit, soak well etc complete all as specified and directed

S&F Steel ventilators with top hung shutter including hinges, steel peg stay,necessary welding,etc complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete fixed to frames all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and as directed.

S&F 150 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed complete all as specified and as directed.

S&F 100mm butt hinges, type B-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised & fixed to PVC door complete all as specified & as directed.

S&F 150mm size aluminium handles, cast type, anodized and fixed complete all as specified and directed.

M & L Hardcore of gauge nexc 63mm deposited spread and levelled in layers nexc 15cm thick watereed and rammed to a true surface with broken stone or boulders complete all as specified and directed.

M&L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, with and including watered and rolled/rammed to a true surface using 8 to 10 tonnes power roller complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation,etc complete all as specified and directed.

M&L Factory made chmfered edge cement concrete paver block with grey cement and no pigments any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade.manufactured with table vibratoy method using PU mould laid in required coloured and pattern laid over sand bed complete all as specified and directed by Eng-in-charge. Note:-Sand bed shall be measured and paid separately

M&L Factory made chmfered edge cement concrete paver block with grey cement and pigments any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade.manufactured with table vibratoy method using PU mould laid in required coloured and pattern laid over sand bed complete all as specified and directed by Eng-in-charge. Note:-Sand bed shall be measured and paid separately.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per Item 36 above, but 6mm to 8mm dia,complete all as specified and directed.

All as per Item 36 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders,etc complete all as specified and directed.

S&F Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240 complete all as specified and directed.

S&F Rolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment conforming to Fe:410-W(Gde-E-250) quality-A complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Mild steel screw bolts (Machine made) with hexagonal or square head at one ends and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut and length of bolt exc 5 cm but n.exc 10 cm and diameter of neck 16 to 20 mm complete all as specified and directed.

S & F Mild steel bolts purpose made with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long and diameter of neck exc 12 mm n.exc 20 mm complete all as specified and directed

M&L for pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed

M&L for pre-painted hot dip aluminium-zinc alloy metallic coated Plain steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in Evas roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed

M&L Glazed coloured ceramic tiles of size 300x450x6 to 7mm thick, as in vertical surfaces such as skirting,dado,etc and set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles laid over and including 10 mm thick rendering as in backing wall plaster in CM (1:4) complete all as specified and directed.

M&L Coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile not exceeding 0.11 Sqm as in floors, etc. and set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and directed.

M & L 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in floor finishes complete all as specified and directed.

M&L 50 mm thick PCC (1:3:6) type C-1 (using 20 mm graded stone aggregates) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with hot bitumastic mix in proportion of bitumen and sand 1:2 complete as specified and directed.

M&Lr 75 mm thick PCC ( 1:4:8 ), type D-2 (using 40 mm graded stone aggregate), as in sub base of floor complete all as specified and as directed.

M&L Chequered cement concrete tiles 25cm x 25 cm x 22mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments, over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed

M&L Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over 15mm thick screed bed of CM (1:6) complete all as specified and directed.

M&L Rendering 10.mm thick plaster in CM (1:6) on fair faces of brick work or concrete surfaces including finishing top even and smooth without using extra cement complete all as specified & directed.

M&L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces including finishing fair and even complete all as specified and directed.

M&L Rendering 10.mm thick plaster in CM (1:4) on fair faces of concrete surfaces as in ceiling including finishing top even and smooth without using extra cement complete all as specified and directed.

M&L Preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L Preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M&L Prepration of newly plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L Preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paintover a coat of red oxide primer complete all as specified and directed.

S&F 15mm dia bore of pipes, medium grade, galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F 20mm dia bore of pipes, medium grade, galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F Fancy type long body 15mm dia Bib taps cast copper alloy, chromium plated screwed down to iron pipe or for brass ferrule & fixed complete all as specified and directed.

S&F Fancy type swan long neck 15mm dia pillar taps suitable for countershunk basin, cast copper alloy with capstan heads, chromium plated , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipe & fixed complete all as specified and directed.

S&F Vitreous china wash down water closet, "Pedestal pattern with fixing bolt, plastic water closet seat cover, white, closed pattern with flat bottom and cover with aluminised hinging device, brass chromium plated jet shower with one meter long flexible pipe,etc complete all as specified and directed.

S&F Vitreous china wash down water closet, "Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of P or S trap embedded in cement concrete bedding,etc complete all as specified and directed.

S&F Wash basins white, vitreous China, Countershunk top , size 580x450mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed to wall complete all as specified and directed.

S & F Vitreous china urinal half stall type white including waste coupling, PVC waste pipe and necessary fittings arrangements complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60 gms) complete all as specified and directed.

S&F Towel Rail 600 mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified and directed.

S & F Health faucet 15mm dia with 1.5mtr CP flexiable pipe complete all as specified and directed.

S&F PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flush pipe, brackets,etc complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F 15mm bore dia stop valves / angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks of 500 Ltrs capacity,(cylindrical vertical with closed top) double layered hoisted and fixed in position all as specified in SSR part-I & as directed.

S&F Rotational moulded polyethylene water storage tanks of 1000 Ltrs capacity,(cylindrical vertical with closed top) double layered hoisted and fixed in position all as specified in SSR part-I & as directed.

S&F 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe & fixed (Minimum weight 210 gms) complete all as specified & as directed.

M&L 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement in repair complete all as specified and directed.

S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, fixed to walls as in repair complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, fixed to walls as in repair complete all as specified and as directed.

S & F 110mm PVC (SWR) junction single (Single T) equal or unequal with access door

S&F PVC (SWR) bends 110mm dia any radius all as specified and directed.

S&F PVC (SWR) bends 75mm dia any radius all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore fixed with pipe complete all as specified and as directed.

S&F PVC (SWR) pipes 160mm dia single socketed, in any length with rubber ring joints, fixed to walls as in repair complete all as specified and as directed.

M&L PCC ( 1:3:6 ), type C-2 (using 40 mm graded stone aggregate), as in bed to drain pipes of 100mm bore incl packing under and haunching against the sides of pipes after thy are laid and testing complete all as specified and as directed.

M&L PCC ( 1:3:6 ), type C-2 (using 40 mm graded stone aggregate), as in bed to drain pipes of 150mm bore including packing under and haunching against the sides of pipes after they are laid and testing complete all as specified and as directed.

S & F Salt glazed stoneware gully traps square or round mouthed type P of size 150 x150mm complete all as specified and as directed.

M & L for concealed point wiring complete with 1.5 sq mm FRLSH,PVC insulated multi standard copper conductor two single core cable 1100 volts grade,drawn into non metalic PVC rigid conduit medium grade of size not less than 20mm bore and conduit accessories fixed on wall roof etc, and including provn of PVC insulated 1.5 sq mm copper conductor cable for each continuity and connected to common earth dolly, for one light/fan point controlled by one one way switch, complete all as specified and directed by Engineer-in-Charge

All as per item No.90 above,but for one 3 pin socket outlet 5 amp independent board

All as per item No.90 above,but for one 15 Amps socket outlet but using 2.5 sq mm,copper conductor with 2.5 sq mm,PVC insulated single core cable for earth continuity conductor.

S&F Modular switch one way 6 Amps 1 module including Modular PVC cover plate with frame & metal flush box of suitable size all as specified and directed.

S&F Modular switch one way 16 Amps 1 module including Modular PVC cover plate with frame & metal flush box of suitable size all as specified and directed.

S&F Modular socket outlet, 5 pin 6 Amps flush type 2 module including Modular PVC cover plate with frame & metal flush box of suitable size all as specified and directed.

S&F Modular socket outlet,5 pin 6/16 Amps flush type 2 module including Modular PVC cover plate with frame & metal flush box of suitable size all as specified and directed.

S&F Ceiling rose surface type bakelite 65x50mm three terminal all as specified and directed.

S&F LED tube light fitting 4 ft. 1 x 18 watt with 230 volts, with bipin holder connector block, LED retrofit tube rod etc complete with all accessories internally pre-wired and fixed to walls/ceiling with screw on round PVC blocks including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make : LED Batten - Crompton Cat part No IG16LT8-16 or equivalent in philips/Wipro, Tube rod - Crompton Cat part No LTT8-20 or equivalent in philips/wipro/Havells/Surya.

S&F LED bldg security light fitting 25W watt with 230 Volts with IP 66 protection, High Impact resistance complete with mounting bracket,02 x MS Flat size 40x3 mm clamp set, nut/bolt/washers etc all accessories internally pre-wired and fixed to walls complete all as specified and directed.

S&F Pressed sheet metal enclosure (MCB DB), 4 way,double door type,240 volts,single phase and neutral with 200 Amps rated bus bar including grouting in wall and connecting complete all as specified and directed.

S&F MCB SPN 32 Amps, 230 volts AC and connecting using suitable size of wire all as specified and directed.

S&F MCB SP 6 to 32 Amps, 230 volts AC and connecting using suitable size of wire all as specified and directed.

Supply and spread river sand in trenches as cable cushioning 8 cm below the cables and 15 cm above the cable all as specified and directed. Note: Punned thickness shall be measured for payment purpose.

Supply and lay burnt bricks sub class 'B' standard size laid across the cable in trenches as protection to the cable complete all as specified and directed.

Supply and laying GI pipe, 40 mm bore (light Grade) in trenches/under floors or roads or along the pole incl clamp with suitable nuts & bolts for protection of cables complete all as specified and directed.

Supply and fix or passing through pipe/wall/floor/trenches XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with glanded aluminium conductor of cross sectional area 16 sqmm 2 core all as specified and directed.

Supply,laying and testing of XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with glanded aluminium conductor of cross sectional area 10 sqmm 2 core laying or passing through pipe/wall/floor/trenches complete all as specified and directed.

S&F Exhaust fan 250mm sweep,RPM 1200, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, copper winding and connection complete all as specified and directed.

S&F Electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

M&L Cutting existing steel tubing for alterations or additions (Each cut measured) of 20 mm bore all as specified and directed.

M&L Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) of 20 mm bore complete all as specified and directed.

S&F GI water tubing, 20 mm dia (medium grade) including fittings/accessories like sockets, bend, elbow, union etc laying in trenches complete all as specified and directed.

M&L Gunmetal globe/gate valve of size 20 mm bore, ISI marked, with iron wheel head, screwed both ends complete all as specified and directed.

M&L Earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 (using 20 mm graded stone aggregate) for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 (using 20 mm graded stone aggregate) with 3 Nos 8 mm dia TMT bars both ways,etc and testing on completion complete all as specified and directed by Engineer-in-Charge.

M/s PRABIR ENTERPRISE

M/s HALDER ENTERPRISE