SPECIAL REPAIRS TO 2(T) MESS (P-134) OF MTTI AF STATION AVADI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding,(but not backing) removing all rubbish off the premises complete all as specified and as directed.

M&L Non skid ceramic tiles 7 to 8mm thick light (Square/Rectangular) area of each tiles exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc,confirming to IS: 15622 : 2006 grade B II (a) matt superior finish flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 as bedding layer for floor finishes complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (Square/Rectangular) area of each tiles exc. 0.18 sqm but not exc. 0.38 sqm, in floors etc,confirming to IS: 15622 : 2006 grade B II (a) matt superior finish flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 as bedding layer for floor finishes complete all as specified and as directed.

M & L Glazed ceramic coloured tiles of 350x250 mm/ 450x350mm and 7mm thick tiles on vertical surfaces using glazed economy finish grade B III ceramic tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match over rendering in CM 1:4 , 10mm thick on fair faces of brick/concrete wall surfaces complete all as specified and as directed.

Dismantling stone slabs in floors, any thickness, jointed in any mortar all as specified and as directed.

M&L for Machine cut Kota stone slab flooring 20-25 mm thich over 15 mm cement screed bed in cm 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polioshing complete all as specified.

M&L for Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types over 15mm thick screed bed in CM 1:6 all as specified.

Taking down cement or cement lime plaster any description on brick or stone walls incl ceiling plaster etc including racking out joints hacking for key scrubbing down with water etc all as directed.

M&L for Rendering 5mm thick on ceiling surfaces, in cement mortar 1:3 finished the surface even and smooth without using extra cement , complete, all as specified

M&L for three coats of colour washing including preparation of newly plastered surfaces of ceiling all as specified.

M&L for 15 mm thick renderingin CM 1:6 on othe than fair faces of Brick work or concrete surfaces finished even and fair without using extra cement all as specified and as directed.

M&L for 5 mm thick cement plaster in CM 1:4 with WPC over 10 mm thick plaster in CM 1:6 finished even and smooth without using extra cement all as specified. Note:- WPC shall be measured and paid seperately.

Dismantling of ceiling board of any thickness. Including aluminium snap grid all specified and as directed

M & L for powder coated Aluminium snap grid (minimum 50 microns thickness powder coating) of size 605 x 605 mm with anodised aluminium angle of size 25mmx25mm x1.5mm thick and main & cross T of size 40mm x 25mm x 1.5mm thick for false ceiling including fixing of supporting hangers all as specified and directed .

S & F Hangers 6 mm dia GI (up to 1200 mm length) adjusting level fixed to roof by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified.

S & F 12 mm thick Gypsum board of size 600 x 600 mm in ceiling fixed with screws and finished with two coats oil bound distemper over a coat of primer all as per manufaturers instructions complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sq. m with shutters (without taking off shutters from the frame) each all as directed.

Taking down chowkats or frames not exc 1.5 sq. m with shutters (without taking off shutters from the frame) each all as directed.

S&F Pressed steel frames of size165 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,

S&F factory made 2nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats

S & F 2nd class Hard wood factory made plain framed panelled shutters (any No of pannels ) with pannel of 9 mm ply BWP commercial type or of as in doors all as specified.

S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 all as specified.

S&F of aluminium, anodised, barrel tower bolts of extruded section and fixed 200 mm long all as specified.

S&F 150 mm double action spring hinges, mild steel with steel wire spring, stove enamelled, black all as specified.

S&F 150 mm size extruded aluminium alloy handles, fabricated type anodised all as specified.

S&F 2 nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like including all necessary labours; articles n exc 200 cu. cm each all as specified.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; will ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 all as specified.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in bed plates for holdfast etc including necessary form work all as specified and as directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified.

Supply and fix powder coated aluminium frame for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc., complete all as specified

S&F powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified

S&F powder coated aluminium sliding window and ventilator shutters,without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge.

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified.

S&F Aluminium rebated Mortice Lock vertical type size 100mm four Lever complete all as specified and as directed

S&F Aluminium (Die cast) body door closer hydraulically regulated desination No 3, universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed all as specified.

S&F 150mm long floor door stopper Aluminium alloy body and tongue,anodised,with hard drawn steel spring fixed in floor all as specified.

Supply and fix 9 mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed all as specified.

Supply and fix 5.0 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm each pane all as specified.

Supply and fix 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm each pane all as specified.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed wih self tapping screws as specified

Demolition of brick work or stone /boulder masonery built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facing all as specified and directed.

M & L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 all as specified.

M&L for prepration of new surfaces of wall and applying two coats of oil bound distemper over a coat of primer & 3 mm thick wall care putty to wall surfaces all as specified.

M & L Prepration of new surfaces of wall and applying two coats of exterior weather coat paint over primer over 3 mm thick wall care putty all as specified.

S&F rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Fe-410-W(Gde-E-250) quality A complete all as specified and directed

Supply only integral Water proofing compound.

Dismantling wrought iron work or mild steel of any description not otherwise provided complete all as specified all as directed.

S&F Framed work such as grills,gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard barsand similar work conforming to Fe.290. Gde-E-165 all as specified.

Dismantling of partialy Reinforced cement concrete of any description and in any position not otherwise specifically provided for all as directed.

M&L for Gl wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls. Ceilings, stanchions, beams, etc. including all laps, cutting and waste all as specified.

M&L for RCC 1:2:4 type B1 using 20mm graded stone aggregate as in lintels, band, chajja, facica upto 1.5 m clear span including form work all as specified and as directing. Note:- Reinforcement shall be measured and paid seperately.

M&L for TMT bars 6 mm mm dia and over up to mm , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) or securing with clips all as specified.

Taking up or down existing steel tubing 15 mm bore and connections complete all as specified and directed.

Taking up or down existing steel tubing 20mm bore and connections complete all as specified and directed.

Taking up or down existing steel tubing 25mm bore and connections complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified.

S&F in repair 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately) of capacity exc 500 and n exc 1000 all as specified.

S&F 15mm bore GI water tubing medium grade galvanised with all fittings and fixed complete and laid in trenches all as specified.

S&F 20mm bore GI water tubing medium grade galvanised with all fittings and fixed complete and laid in trenches all as specified.

S&F 25mm bore GI water tubing medium grade galvanised with all fittings and fixed complete and laid in trenches all as specified.

S& F in repairs 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed all as specified.

S&F in repairs 15 mm dia angle Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed all as specified.

S&F 20 mm dia Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed all as specified.

S&F in repairs 25 mm dia Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed all as specified.

S&F 25 mm dia Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed all as specified.

S&F in repairs 15 mm dia Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified.

S&F in repairs vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests including 10ltrs capacity PVC flushing cistern low levl with inlet, ball valve float chain and pull and brackets, flush pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern all as specified

S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type low level flushing cistern white ISI marked with inlet ball valve, float valve and handle including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed.

S&F in repairs Vitreous China Urinal, Half Stall type White (excluding flushing cistern, flush pipe and waste pipe) and fixing including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. including, waste pipe,sprader etc omplete all as specified and direcetd.

S&F in repair 15mm bore dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed

S&F in repairs chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union all as specified.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (Cylinderical vertical with closed top) and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed.

S & F vitreous china wash basin white flat back of size 550 x 400mm including brackets,cutting for and pinning in ends of brackets for erecting stand etc in repairs and incl. 32 mm dia PVC waste pipe fixed to floors of length 60 cm all as specified.

S&F PVC Connection 15 mm size with nuts of length 300 mm all as specified.

S & F PVC (SWR) floor trap of 75mm dia with grating including jointing with solvent cementall as specified.

M&L for RCC 1:2:4, type B1, using 20 mm graded stone aggregate as in slabs supported on walls,beams and columns in floors, roofs, landings, balconies , canopies, deck slabs in shelves and like including form work all as specified and as directed

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as directed.

M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection complete all as specified and as directed

M&L for 75 mm thick PCC 1:4:8 Type D2 using 40 mm graded stone aggregate as in Sub base all as specified and as directed

M&L Chequered cement concrete tiles 20 -25 mm thick, set jointed and pointed with grey cement and pigmentss in neat cement slurry on floors white or coloured cement to match over 20mm thick screed bed in cm 1:4 all as specified.

M&L for 50 mm thick sand cushion filling under floors complete all as specified.

M& L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigments all as specified and directed.

Complete removal of existing treatment and applying two coats of exterior weather coat paint over a coat primer over 3 mm thick wall care putty to external wall surfaces all as specified,

Complete removal of existing treatment and treating with two coats of oil bound distemper over a coat of primer & 3 mm thick wall care Putty to wall surfaces all as specified.

M&L for two coats of colour washing including preparation of old plastered surfaces of ceiling all as specified.

M&L for applying two coat of synthetic enamel paint over a coat of primer on new wooden surfaces exc 10 cm in width or girth including preparation surfaces all as specified.

M&L preparing old steel surfaces over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed

S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. all as specified.

Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required superficial area exe 150 sq. cm but n exc 400 sq. cm all as specified.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping/bed plates, steel door frame etc all as specified.

S&F Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members weight per Sqm n exc 4 kg all as specified.

Taking down carefully unserviceable point wiring copper / aluminium (light, fan, socket or power) complete, including removal of batten / conduit / gutties / wooden board etc., including fittings and fixtures such as switches, ceiling roses, regulators, sockets, light fittings, fans etc., removal from site under Sch of credit and removal of unserviceable items out of site and making good the disturbed surfaces of walls, ceilings etc., complete all as specified and as directed.

Point wiring on stone / brick masonry wall complete with two 1.5 sqmm single core PVC insulated FRLSH ,1100 volts grade unsheathed cable confirming to IS-694, 1977 with multistranded copper conductor, drawn through and including non-metalic rigid PVC conduit, conduit fittings and conduit accessories not less than 20 mm dia concealed in walls and fixed with suitable clamps on ceiling / roof trusses etc., and including provision of one 1.5 sqmm PVC insulated single core multistranded copper conductor FRLSH green in colour as earth continuity conductor and connected to common earth dolly, including steel box of required module for modular switches/sockets and regulators all as specified complete for the following;- Note : Cost of terminal box and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring.

(a) one light point controlled by one switch.

(b) One Exhaust fan point controlled by one switch.

(c) One ceiling fan point controlled by one switch and regulator

(d) One wall mounted fan point controlled by one switch

(e) One switch socket outlet 3 pin 5 Amps on same board along with other switches

(f) One switch socket outlet 3 pin 5 Amps on independent board.

All as per item No 98 here-in-before but for point wiring with two 4.0 sqmm single core copper conductor multistranded FRLSH cable and one 4.0 sqmm PVC insulated single core multistranded cable as earth continuity conductor green in colour for one 3 pin switch socket outlet, 15 Amps, on independent board and industrial socket complete all as specified and as directed.

S&F Switch piano flush type, single pole,5 Amps, 240 volts complete all specified.

S&F Switch socket 3 pin 5 amps , multi pin , flush type,complete all specified.

S&F Switch socket 3 pin 15 Amps, multipurpose, flush type complete all specified.

S&F ceiling rose 65 X 50 mm , three terminals ,bakelite , surface complete all specified.

S&F electronic fan regulator, flush type phenolic laminated sheet etc; as required.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 40-63 AMP, in the MCB DB complete with connection testing and commissioning complete all as specified.

Supply and Fixing of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified.

Supply and fix Surface and wall mounted LED tube light fitting 20W, batten type (4 feet), PC housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz supply complete all as specified. Make:- Crompton :-CCS-102-20-65-SL-DP-NWH /Bajaj :- BCLSB 20 WH /C&S :- NAKSHATRA-E/20W/W

Supply and fix Surface/ wall mounted LED double tube fix-ture, 2 x 22 Watts, universal batten for T5 and T8 lamps, in-cluding all accessories including Ultra bright glass LED Tube light 20 W, with very high efficiency suited for installation in T8/ T5 fitting with G13 lamp holders complete all as specified and suitable to operate on AC 230V, 50Hz supply, prewired including connecting up with PVC sheathed 1.0 sqmm 3 core copper conductor flexible wire complete with suitable double stiff pendants comprising of glavanised steel or chromium plated brass bell mouth connectors 2 Nos with back plate and 2 x 1.50 metre long down pipe with accessories completed all as specified and as directed. Make: Havells:- REGALBATTENT8UPTO2X22WSSBSWH/ CRYSTAL1213T8DSTL18WLED865SGLASS/ Bajaj:- BLRB-DB 218/ BLRB 18W CW LED/ Crompton:- IGP162LT8/ LGT8-20-865-(2).

Supply and fix Surface and wall mounted LED tube light fitting 10W, batten type(2 feet), PC housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz supply complete all as specified. Make:- Crompton :-CCS-102-10-65-SL-DP-NWH/ Bajaj :- BCLSB 10 WH /C&S :- NAKSHATRA-E/10W/W

Supply and fix Decorative ECO bulkhead luminaire capacity12W, environmental friendly ultra modern energy saving surface mounted, LED luminaire comprising of high brightness and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete all as specified. Make :- Luker :- Eco Bulkhead (LBKOVSL12) /Crompton :- LBHP-10-CDL / Surya :-SLE BH 10W

S&F LED energy saving industrial type tube light fitting for capacity 36/40watt,IP65 with high efficancy integrated electronic driver complete including connection from ceiling rose to light fitting with suitable size of connection cable including taking down the old unserviceable fitting complete all specified and directed by the Engineer-in-Charge. Make :- Havells:-MAGNUMGRANDNEOIP6636WLED857SPC Crompton:- CIS-300-40-57-SL-DP-NGR Jagur:- LPRDO1X040C

S&F LED building security light fitting 25W made up of pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07, complete pre-wired and connecting up with suitable twin core flexible copper wire including provision of necessary GI tubing medium grade 25mm bore of pipe 1.5 bent to shape with necessary clamps made out of mild steel, nuts and bolts etc., including two coats of synthetic enamel paint over a coat of red oxide primer on exposed steel surface for fixing the fitting to Bldg etc complete all as specified and as directed. Make :-C&S ( INDUS-i/25W) / Bajaj :- BCLST 25W LED I V2 /Crompton :- LSTS-25-CDL-M

Supply and fix Flood light luminaries LED energy saving 50 Watt LED exlusive innovative designed, long life versatile pressure die-cast aluminium IP 65 flood light luminaire high power LED in single piece deep drawn housing complete with all accessories and glass cover with suitable bracket or with grouted spring pressure fasterner/steel rawal plugs as directed by Engineer in Charge including connection from juction box to lilght fittings with 1.5 Sqmm 2 single core PVC insulated and unsheather, multi stranded FRLS copper conductor cable drawn in flexible conduit including taking down the old unserviceable fitting complete all specified and directed by the Engineer-in-Charge. Make :- Havells - JETA QUANTOPLUSFLP50WLED757SYMLENS / Crompton:-CFS-50-57-60D-SL-GL-NSG/ Jagur:- LFLDO4SO50XC

Taking down carefully Power / Sub main wirings with PVC aluminum conductor cables in PVC/STEEL conduits / TW battens up to 2 runs of 6 Sq.mm removing materials from site, taken as credit , making good the disturbed surfaces all as specified and as directed.

Power / Sub-main wiring with PVC insulated unsheathed, FRLSH ,1100 volts, grade multistranded copper conductor, two runs of single core 6 sqmm conforming to IS-694, drawn through and including suitable dia rigid PVC conduit, conduit fittings and conduit accessories alongwith one run 6 sqmm PVC insulated single core multistranded copper conductor cable (green) as earth continuity conductor concealed in walls and fixed with suitable clamps on ceiling / roof trusses etc. and connecting to common earth dolly complete all as specified and as directed.

S&F MCB DB SPN 8 way, double door, powder coated, 240 volts, AC, 50Hz, IP 43 protected, with provision for MCB double pole as incomer and SP MCBs as outgoing with tinned copper bus bar, neutral link, earth link and connecting up complete all as specified and as directed. Note : Incoming and Outgoing MCB measured separately relevent items.

S&F Load line MCB DB TP&N 4 way, vertical, double door, powder coated, 415 volts, AC, 50Hz, IP 54 protected, fixed on wall semi flush with provision for FP MCCB 100 Amps as incomer and SP MCBs 40 / 63 Amps as outgoing with tinned copper bus bar, neutral link, earth link and connecting up complete all as specified and as directed. Note : Incoming MCCB and Outgoing MCB measured separately relevent items. Make : Havells cat part No DHDLVDRWGOFO04

S&F MCCBs100 Amps 415V,16KA, 4 Pole complete all as specified .

Taking down unserviceable ceiling fan (1200mm/1400mm) from site (Serviceing of ceiling fan) and re-fixing in position duly rectifying the defects (replacing of ball and bearing, oiling / greasing,etc.) and make it serviceable in all respect including painting and marking MES No complete all as specified and as directed by Engineer in Charge.

Taking down unserviceable ceiling fan (1200mm /1400mm) from site (Complete winding of ceiling fan) and re-fixing in position duly rectifying the defects (replacing of ball and bearing, oiling / greasing,winding etc.) and make it serviceable in all respect including painting and marking MES No complete all as specified and as directed by Engineer in Charge.

Taking down unserviceable Exhaust fan /wall mounted fan (450mm &600mm sweep) from site (Serviceing of Exhaust fan) and re-fixing in position duly rectifying the defects (replacing of ball and bearing, oiling / greasing, etc.) and make it serviceable in all respect including painting and marking MES No complete all as specified and as directed by Engineer in Charge.

Taking down unserviceable Exhaust fan /wall mounted fan (450mm &600mm sweep) from site and re-fixing in position duly rectifying the defects (replacing of ball and bearing, oiling / greasing,winding etc.) and make it serviceable in all respect including painting and marking MES No complete all as specified and as directed by Engineer in Charge.

Material and labour for earth continuity conductor or main earthing lead fixed to valve on batten or recess or chases or burried in ground or drawing in conduit or any other situation for loop earthing etc as reqd 4 mm dia galvanized steel wire all as specified and directed by Engr-in-Charge

Earthing complete with galvanised iron earth plate electrode 600mm X 600mm X 6mm thick, with and including earthing of 4mm dia GI wire protected by 15mm dia GI pipe light grade upto a length of 7.5m. The plate shall be buried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of the earth plate at a depth not less than 1.5 metres below ground level, connected to earth lead as described here-in-before by means of bolts, nuts, washers and checknuts made out of galvanised iron or mild steel, earthing lead protected by as described here-in-before and connected to main switch board or main control board or electric pole all as shown on electrical plate No.3 of MES Sch Part-I including necessary earth work and excavation in any type of soil, plain cement concrete 1:3:6, type C1 chamber, reinforced cement concrete cover slab with locking arrangement and handle of 10mm dia MS round bars 450mm long, 1:2:4 type B1, 50mm thick with 8mm dia TMT bars at 140mm centre to centre both ways, GI pipe of bore 20mm medium grade for watering with funnel, wiremesh, salt, charcoal, lugs including testing complete all as specified and as directed.

SAMYDOSS CONSTRUCTIONS

M/s Omm Muruga Enterprises

pmv.enterprises

PSM ENGINEERS