MANNING AND OPERATION OF WATER SUPPLY DISTRIBUTION SYSTEM ( BOTH INTERNAL AND EXTERNAL ) AND FIRE FIGHTING DISTRIBUTION SYSTEM INCLUDING REPAIR AND MAINTANANCE AT INHS ASVINI, COLABA, MUMBAI-05

Amount

SCHEDULE 'A' PART I. Manning and maintenance including repairs to all nature of internal water supply system consisting of GI/CPVC/UPVC/HDPE pipe and fittings/ fixtures of any type, solar water heater pipe lines, geyser pipe lines etc including repairs / maintenance to sanitary fittings, bathroom fittings and fixtures complete by employing two Plumber for one shift from 0900 Hrs to 1700 Hrs in INHS Asvini Hospital Buildings (except sunday and holidays) complete all as specified and as directed by Engineer-in-Charge. Notes:- Qouted rates shall be deemed to be included the following:- (a) Supplying Complaint Slip books having 100 pages as per sample - 24 Nos (b) Supplying and maintaining complaint Register Long size having 300-400 pages (As per Sample) - 04Nos (c) Providing necssary T&P, safety belts etc for the works required at site. (d) Providing minor items / parts like spun yarn-2 Kg, shellac-2Kg, M-seal-10Kg, solvents-5Ltr, teflon tape-50 Nos, grease-2Kg, rubber packing/ gasket sheets/ washer of all types, clamps-100 Nos, hooks, screws etc not included in Schedule 'A' Part-II (e) Providing uniform to both Plumber and helper as directed.

Note for item No 1.00 - Qouted rates shall be deemed to be included the following:- a) Surprise check will be carried out by department representative and if any employes is not available at his working place, he will be treated as absent and recovery shall be made @ Rs 100/- per hour per person. (b) Contractor has to submit the list of employees including reserve alongwith police verification, Aadhar card, Aadhar card linked Bank Account No and relevant documents as mentioned in PS to the Engineer-in-Charge. (c) The payment shall be made to employee on or before 10th of every calender month. Payment to employees shall be done by crossed cheque/ RTGS/NEFT/IMPS through Aadhaar linked bank account only and it shall not be less than minimum fair wages as per act in vogue. (d) Contractor has to submit proof of payment of EPF subscription made by him alongwith RAR failing which RAR will not be progressed for payment. (e) Contractor has to employ the number of labours per day as intimated by the Engineer-in-Charge for which he has to make alternative arrangement. (f) The rates quoted by the contractor shall be deemed to be included provision of all latest labour laws / regulations including all relevant taxes as applicable. (g) Contractor shall quote the rates considering their monthly leaves, releiver etc as per labour laws and nothing extra shall be paid on account of the above. In case of absence of staff/tradesman from duty, payment of that day will not be paid. In addition to that a penalty of Rs 700/- per day per person will be recovered from contractors dues. Also in case of long absence (more than one week) of staff/tradesman, the penalty shall be recovered including Sundays & Holidays if any. The contractor shall have no claim on this account.

(h) Contractor has to supply three sets of Tools and Plants (as applicable) to the labours employed by him and should be placed with the safe custody of department. Rates quoted shall be deemed to be included the above provision. (j) In case any variation in manpower as indicated in Column No 4 of BOQ due to any reasons / or any manpower held in Department or any policy change contractor should have no claim on that account. (k) The bidders are advised not to quote rate less than minimum fair wages as circulated by competent authority. If the quoted amount is less than the estimated cost of work mentioned in NIT, the lowest bidder will have to deposit FDR/BGB as elaborated herein after in favour of Accepting Officer within 07 days of opening of financial bid (Cover No 2). The deposited amount shall be the difference between estimated cost mentioned in NIT less S & F cost of items and amount quoted by lowest bidder less S & F cost of items. FDR/BGB shall be released only after satisfactory completion of work. If the contractor fails to pay minimum wages to employees, the department shall have right to withhold the said amount which will be verified by AGE (I) . The decision of Accepting Officer regarding amount to be withhold shall be final and binding. The withhold amount will be utilised by AGE (I) for payment to employees if contractor fails to pay minimum wages and balance amount if any shall only be released. If the lowest bidder fails to deposit the amount as stated above within 07 days, the contractor shall be banned for 06 months & his bid shall be rejected. The contractor shall sumbit BGB/FDR of validity 12 months for the purpose of encashment/ release as the case may be. (l) The rates quoted shall be inclusive of suitable reliever of menpower engaged by them (n) Contractor shall provide a uniform dress to all persons with name plate and backside of uniform with agency name. If any person found without uniform a penalty of Rs. 100/- per person per day will be recovered from contractors dues. (m) The quoted rates shall inclusive of GST as applicable

SCHEDULE 'A' PART II S&F in repairs 20 mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified.

Ditto- as per item No 2.00 above but 25 mm bore

S&F 15 mm bore GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings or laid in floors with suitable size GI clamps including taking down old GI tubing including fittings complete all as specified.

Ditto- as per item No 4.00 above but 20 mm bore

Ditto- as per item No 4.00 above but 25 mm bore

Supply only GI fitting i.e. Bend /Elbow/ Elbow Reducers suitable for medium grade GI pipe 15 mm bore.

Ditto- as per item No 7.00 above but 20 mm bore

Ditto- as per item No 7.00 above but 25 mm bore

Supply only GI fitting i.e. Tee and Tee Reducers suitable for medium grade GI pipe 15 mm bore.

Ditto- as per item No 10.00 above but 20 mm bore

Ditto- as per item No 10.00 above but 25 mm bore

Supply only GI fitting i.e.Socket and Socket reducer suitable for medium grade GI pipe 15 mm bore.

Ditto- as per item No 13.00 above but 20 mm bore

Ditto- as per item No 13.00 above but 25 mm bore

Supply only GI fitting i.e. Union suitable for medium grade GI pipe 15 mm bore

Ditto- as per item No 16.00 above but 20 mm bore

Ditto- as per item No 16.00 above but 25 mm bore

Supply only GI fitting i.e. Nipple including check nuts suitable for medium grade GI pipe 15 mm bore

Ditto- as per item No 19.00 above but 20 mm bore

Ditto- as per item No 19.00 above but 25 mm bore

Supply only ball valves, high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball 15 mm bore pipe (minimum weight 142 gms)

Supply only ball valves, high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball 20 mm bore pipe (minimum weight 210 gms)

S&F in repairs hand shower (health faucet) including 1.2 metre length easy flex tube in chrome finish including wall hook and connected fittings complete all as specified.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm.

S&F in repairs CP copper connector pipe of standard size all as directed

SHREE JAGDISH FURNITURE CO.

Shree Ayyappa Engineering