WBPWD/EE-I/CKHED/eNIT-93 ( R ) /24-25

Amount

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [Vide page No D-11, Item No-15] Incoming - 415V, 25/35KA, 160A, FPMCCB (1 -nos)[Vide page No D-8, Item No-10] Outgoing - 10KA, (C-characteristics) 63A, TPMCB - (6 -nos)[Vide page No D-6, Item No-7

6 way [Legrand/ L&T]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment [D-10, 14] Incoming - 415V,63A, FPMCB Isolator [ Legrand ] (1-nos) [ D-5,6 ] (1-nos) Outgoing - 10KA, (C-characteristics) 6-32A, SPMCB [ Legrand ]- (18-nos) [ D-6,7 ]

6 way [Legrand/ L&T]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Gloster/RR Kable/Finolex) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire incl. cutting channel and making necy. connection as required. [E-9,1]

a) 4x6 sqmm+2x 4sqmm ECC [Vide page no-E-9,item no-1(s)]

e) 4 x 10 sqmm+2x 6 sqmm ECC) [ For AC ] [Vide page no-E-9,item no-1(d1)]

f) 4 x 16 sqmm + 2 x 10 sqmm ECC) [ VTPN to TPNDB ] [Vide page no-E-9,item no-1(g1)]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.[Vide page No F-5, Item No-9 (i)& (ii)]

4 x 6 sqmm+2x 4 sqmm ECC) [(F-5,9(iii&ii))]

4 x 10 sqmm + 2 x 6 sqmm ECC [ F-5,9(iv&iii)]

4 x 16 sqmm + 2 x 10 sqmm ECC) [ F-5,9(v&iv)]

Supply and Delivery of 1.1 KV grade following sizes Al. armoured PVC/XLPE cable (Gloster/Havells/polycab/KEI/Currency) as mentioned below as per choise of EIC.

4 Core 70 sqmm

Laying of cable above 3½ core 50 sqmm and upto 3½ core 90 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting. [[Vide page No F-1, Item No-2(d)]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below. [[Vide page No F-4, Item No-7]

4 Core 70 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. [Vide page No F-5, Item No-8(b)]

4 Core 70 sqmm

Supply & Delivary 7.5TR capacity concealed type Split Air Conditioner of rated cooling capacity of 90000 BTU/hr. with 3Nos. rotary compressor, 3nos. IDU of rated power supply-230V-1ph-50Hz. , 1no. ODU of rated power supply-400V-3ph-50Hz. Air-flow/per IDU:- 1000CFM. ( Make: Hitachi/Voltas/Daiking)

Supply & Delivery of 5 TR capacity concealed type Split Air Conditioner of rated cooling capacity of 60000 BTU/hr. with 2 Nos. rotary compressor, refrigerant R-410A, 2 nos. IDU of rated power supply-230V-1ph-50Hz. , 1no. ODU of rated power supply-400V-3ph-50Hz. Air-flow/per IDU:- 1000CFM. ( Make: Hitachi/Voltas/Daiking)

Erection & Commissioning Charges incl. refrigerant R-410A for 7.5 TR concealed type Split Air Conditioner

Erection & Commissioning Charges incl. refrigerant R-410A 5TR concealed type Split Air Conditioner

Copper Refrigeration pipe line for liquid and suction line with fittings, elbows, bends, supports & brackets (Make-Ryoku)

(5/8" OD with 0.6 mm thick) Make- Ryoku

(3/8" OD with 0.6 mm thick) Make- Ryoku

Supply & Fixing Pipe Insulation in liquid & suction line with 9mm nitrile rubber tube (Accoflex)

b) (3/8" OD with 0.6 mm thick)

(5/8" OD with 0.6 mm thick)

Control copper Cabling from Condensing Unit to control panel (Make: KEI/polycab/ finolex)

a) 4 core 2.5 sq.mm communication cable

S & L of Drain Water piping work out of PVC / HDPE hard pipes of following sizes incl. fitting, accessories, bends, elbows, tees, flanges, tapings, wall sleeves, hangers, supports, anchors.

a) 25 mm dia

Charges for scaffolding arrangement incl. lifting for outdoor & indoor units

Supply and fixing flexible canvass connection for concealed split air-conditioners.

Supplying, fabrication & fixing M.S u-channel of 6 mm thick of size (50 mm x 50 mm x 6 mm) for making platform for installation of outdoor unit of Concealed split AC incl. drilling 2 nos holes in each channel including cutting holes into the wall & grouting the same with cement concrete (1:1 ½ :3) etc. fabricated with horizontal angle of 25 mm x 25 mm x 6 mm including supporting angle 50 mm x50mm x 6 mm in each platform in outer edge for transmitting the load centrally through 2Nos. (50 mm x 50 mm x 6 mm) Angle inserted into the exiting wall. The entire structure should be barricaded & safe for ODU maintenance. Area of the platform is 3Mtr. x 1.2Mtr.Structural design should be approved by E.I.C.

Cutting iron windows and macking door there for passage for outdoor installation, fixing and provision for future maintenance purpose. Including charges of welding , masonary charges, labour charges and materials charges for sand ,cement , chipes etc.

Rate should be quoted incl. of all taxes and cess.

Defect Liability period : 1 year

R.N.ROY ELECTRICAL CONTRACTOR (BID ID -5996587)

MODERN REFRIGERATION AND ELECTRICAL WORKS (BID ID -6035027)

MAXCOOL REFRIGERATION CO. (BID ID -5998367)

SKY DECORATIONS PRIVATE LIMITED (BID ID -5994860)