Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.3 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹42.0 L+₹77,305 (1.88%)Rejected-AOC | L2 | Rejected-AOC Rejected due to not being L1 | |
| 3 | L3₹48.7 L+₹7.5 L (18.1%)Rejected-AOC B 1 2 MAHESH NAGAR AMBALA CANTT 133001 HRY | AMBALA CANTT | AMBALA | HARYANA | 133001 | L3 | Rejected-AOC Rejected due to not being L1 | |
| 4 | L4₹49.6 L+₹8.3 L (20.2%)Rejected-AOC NEAR TCP DOMAIL WARD NO 2 UDHAMPUR 182101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L4 | Rejected-AOC Rejected due to not being L1 |
Tender Value
Refer Docs
EMD Value
₹97,880
Closing Date
19 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH UDHAMPUR
Garrison Engineer (North) Udhampur
GE/U(N)-59/2023-24 PROVN OF ADDN/ALTN OF BLDG NO NP-02 AND NP-06 AT WIRELESS EXPERIMENTAL UNIT AND QTR NO P-21 IN PB ENCLAVE AND CERTAIN OTHER MINOR AND REVENUE WKS UNDER GE (NORTH) UDHAMPUR
2023_MES_629081_1
GE/U(N)-59/ 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE NORTH UDHAMPUR
Please refer the tender documents
7 documents required · 7 mandatory
₹500
Yes
GE NORTH UDHAMPUR
₹97,880
Yes
7 Feb 2024
21 Nov 2023
21 Dec 2023
21 Nov 2023
19 Dec 2023
5 Dec 2023
Amount
Aluminium sliding window, ventilator shutter with chowkhat of powder coated, 5mm thick glass, stainless steel wire gauge for shutters, etc, without sash bars, aluminium sections (20076 weighting 1.608 Kg/m) (thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 5mm thick tinted glass, stain lee steel wire gauge for shutter three track (02 Nos shutter glazed & 01 No wire gauge) etc, complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete (un reinforced) as in ground floor and paving area of any type and any thickness, complete all as specified and directed by Engr-in-Charge.
Taking down cement or cement lime plaster on brick or stone walls etc of any description including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.
Dismantling of wall and ceiling board (fibre/pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and directed by Engr-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 square metre each complete all as specified and directed by Engr-in-Charge.
Taking down chowkhats or frame exc 1.5 sq.m but n.exc 4 sq.m with shutter (without taking off shutters from the frame) and remove from site complete all as specified and directed by Engr-in-Charge.
Dismantling of plain or corrugated Asbestos cement sheeting , thickness including roof covering etc complete all as specified and directed by Engr-in-Charge.
Dismantling of structural steel work in any description complete all as specified and directed by Engr-in-Charge. Including removal per site.
Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engr-in-Charge.
Dismantling floors hearth and tiling of any description or thickness in floor/dado, apron, etc laid bedded and pointed in any mortar, complete all as specified and directed by Engr-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads, complete all as specified and directed by Engr-in-Charge.
Taking up or down steel tubing and connection, including cleaning for re-fixing or removal to store of size of pipe 15 mm bore laid on floor or wall complete all as specified and directed by Engr-in-Charge.
Taking up or down steel tubing and connection, including cleaning for re-fixing or removal to store of size of pipe 20 mm bore laid on floor or wall complete all as specified and directed by Engr-in-Charge.
Dismantling water tanks of 1000 ltrs and removing from site, complete all as specified and directed by Engr-in-Charge.
Brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cm 1:4 complete all as specified and directed by Engr-in-Charge.
Brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cm 1:6 complete all as specified and directed by Engr-in-Charge.
M&L for half brick work with sub class 'b' brick straight or curved on plan exc 6m mean radius but in cm 1:4 complete all as specified and as directed.
Rendering 10mm thick on fair faces of brick work in cm 1:6 finished even and smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge.
Rendering 15mm thick on stone masonary surfaces or surface other than fair face of brick work in cm 1:4 finished even and smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge.
Rendering 5mm thick on ceiling surface in cement moter 1:3 finished even and smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge.
Rolled mild steel section of angle, tee, flats and plates as in roof trusses, purlines, rails/ fencing etc and the like fixed with angle cleats and connecting plates including welding, Gde FE-410-0 complete all as specified and directed by Engr-in-Charge.
Pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws with 120gram of zinc coating /Sqm, complete all as specified and directed by Engr-in-Charge.
Pre-painted galvalume zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.
Coloured vitrified ceramic tiles 10mm thick (square) polished , light shade, area of each tiles exc 0.18 sqm but n.exc 0.38Sq.m (min. size 600mm x 600mm) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl 15mm thick screed bed in CM (1:6) complete all as specified and directed by Engr-in-Charge.
Vitrified ceramic tiles 08 to10mm thick, polished, coloured, light shade in pieces of required width cut out of 600mm x 600mm size, in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including10 mm thick rendering in cement mortar 1:3 complete all as specified and directed by Engr-in-Charge.
Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge.
25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in floor base of tiles complete all as specified and directed by Engr-in-Charge.
Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11sqm but n exc 0.18 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in Cement mortar (1:6) complete all as specified and directed by Engr-in-Charge.
Glazed ceramic coloured tiles in vertical surfaces 450mm x 350mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in Cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.
50mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection finished even & smooth without using extra cement incl making joints 10mm wide and 30mm deep at spacing not more than 2.5m and joints filled with sealing compound grade A complete all as specified and directed by Engr-in-Charge.
S&F false ceiling with fibre cement designer tile ivory painted (high pressure steam cured) of 4 mm thickness (as per IS:14862) of size 595 x 595 mm and any one of the design (oceanic, lake & hill, cascade or Electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gms, both side inclusive) consisting of main 'T' runner with suitably spaced joints to get required length, and 15x32 mm made of 0.30 mm sheet, and cross 'T' at 600mm c/c to form a grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc . Main 'T' runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with gavanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15 mm of all T- sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, and re-fixed all existing electric wiring and fixture all complete at all heights as per direction of Engineer-in -Charge.
Frame work as in grills, guard bars railings etc conforming to FE-290 Gde-E-165 etc complete all as specified and directed by Engr-in-Charge.
Pressed steel frames for doors of size 165 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,complete all as specified and as directed by Engr-in-Charge.
Cement concrete Type B2 1:3:6 in filling, in pressed door frame of any thickness, size or shape complete all as specified and directed by Engr-in-Charge.
S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge.
S&F 35mm thick Glazed and skeleton shutters 1st class hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed by Engr-in-Charge.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixing with wooden/steel beads, complete all as specified and directed by Engr-in-Charge.
Sheet glass 4mm thick ordinary quality and glazing with beading/oil putty in square n/exc 0.5 Sqm each pane complete all as specified and directed by Engr-in-Charge.
S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixed in opening as per specification & drawing complete all as specified and directed by Engr-in-Charge.
S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
Factory Made solid PVC Moulded Door shutter of wall nut colour, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet onback face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.
M&L for Factory made , heavy duty full body digital, paving coloured tiles (Reflective) of size 300 x 300 x 10mm thick for external use laid over and including 15mm thick screed bed or bedding layer in CM (1:4) including jointed with neat cement slurry and pointed in coloured tile grout to match the shade of tiles, complete all as specified and directed by Engr-in-Charge.
S&F factory made Steel ventilators, fixed type, with glazing bars complete all as specified and directed by Engr-in-Charge.
Preparation of new plastered surfaces and applying a two coats of putty 1 to 1.2mm thick to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint complete all as specified and directed by Engr-in-Charge. Make of Putty : Asian/ JK / Birla.
Preparation of old plastered or un-plastered surface by brooming down or steel wire brushing,scraping down smoke soot, moulds moss and efflorences salts and trading oil and greasy spots and filling nails marks with compound of wall putty and sand papering and applying one coat of distemper oil emulsion white or tinted,complete all as specified and directed by Engr-in-Charge.
Prepration of new plaster surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant cement base primer on wall surfaces complete all as specified and directed by Engr-in-Charge.
Preparation of new wooden surface of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of wood primer complete all as specified and as directed by Engr-in-Charge.
Preparation of new or previously untreated steel and iron surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and as directed by Engr-in-Charge.
200mm Aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and as directed by Engr-in-Charge.
300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.
150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed by Engr-in-Charge.
250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.
150 mm size mild aluminium handles cast type anodised complete all as specified and as directed by Engr-in-Charge.
100mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed by Engr-in-Charge.
300mm mild steel ordinary rat tail rod pattern spring including roller plate complete all as specified and directed by Engr-in-Charge.
Floor door stopper of alumium alloy body and tongue anodised with hard drawn steel spring overall length of cover plate 140mm fixed with screw, complete all as specified and directed by Engr-in-Charge.
S&F 1mm thick Mild steel sheet eaves gutters of 150mm dia, glvanised class 3, half round with rounded edges complete all as specified and directed by Engr-in-Charge.
Harrison Mild steel chromium plated 20mm dia (curtain rails) with fixing brackets, stops, roller etc complete all as specified and directed by Engr-in-Charge.
Steel water tubing 15 mm dia medium grade galvanised tubes with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.
Steel water tubing, medium grade, 20mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.
Cutting chases, pining in, making good to facings where required and pointing in cement mortar 1:3, for concealed water tubing etc and maing good, cutting exc 10cm and not exc 20 cm girth complete all as specified and directed by Engr-in-Charge.
Vitreous china squalting pan, orissa pattern size 580 x 440 mm white with integral foot rests and fixed with cement concrete bedding complete all as specified and directed by Engr-in-Charge.
PVC low level flushing cistern 10 ltrs capacity , valve less, syphonic action type, white, with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe etc., fixed in repairs, complete all as specified and directed by Engr-in-Charge.
Vitreous china,white, wash hand basin, flat back of size 550x400mm, white including MS brackets including cutting for and pinning including 32mm dia CP brass waste coupling and PVC waste pipe, fixed in repair complete all as specified and directed by Engr-in-Charge.
CP Towel Ring PTMT 200mm dia Fixed in repair with plastic cleats & screws complete all as specified and directed by Engr-in-Charge.
20mm dia brass chromium plated tubular towel rails,D type,60 cm long between flanges Fixed in repair complete all as specified and directed by Engr-in-Charge.
Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long fixed in repair complete all as specified and as directed.
Corner Glass self (With CP brackets) of size 225 x 225mm complete all as specified and as directed/ as per the sample approved by GE.
Single lever wall mixer 3 in 1, with provn of over head shower & hand shower, Brass CP Mixer water screwed down for iron pipe telephonic type, brass chromium plated, fancy type, with capstan head handles with lettered 'hot' and 'cold' screwed down high pressure, including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, with provision for both hand shower and over head shower, fixed in repair, complete all as specidied and directed. Make : Jaquar, Cera & Hindware.
Hand shower 90mm round shape (telephonic shower), chromium plates, with 1500mm long 15mm bore chome finish flexible pipe with hook, fixed in repair complete all as specified and directed. Make : Jaquar-Code HSH-1727, SHA-571, Cera-F 7030105 for hand shower & F 8070401 for flexible tube.
Centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, fixed in repair complete all as specified and directed. Make : Cera / Hindware.
Shower rose, brass, chromium plated, 125mm dia with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union as in repair complete all as specified and directed. Make : Jaquar, Cera or equivalent as approved by GE
Angle valve, brass, chromium plated, fancy type, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed. Make : Cera / Hindware.
Bib taps, brass, chromium plated, fancy type, long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed. Make : Cera / Hindware.
PVC flexible connections 450mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.
PVC flexible connections 600mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.
Stop valves, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down high pressure, with capstan head handle, screwed both ends for iron pipe or for unions and fixed. Make : Jaquar, Cera or equivalent as approved by GE.
Soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cadmium plated screws complete all as specified and directed. Make : Jaquar, Cera or equivalent as approved by GE
CP brass grating 75mm dia, centre hole, complete all as specified and as directed.
CP brass grating 100mm dia, complete all as specified and as directed.
Rotational moulded polyethylene water storage tanks three layered white (cylindrical vertical with closed top) of 1000 litres capacity, hoisted and fixed in position including connecting up pipes complete all as specified and directed. (fixed in repair)
Ball brass valve 20mm dia high pressure with polythene float and fly nut complete all as specified and directed. Make Parko cat part No 1527
150 mm x 150mm size Salt-glazed stoneware gully traps, square or round mouthed, type ‘P’ and jointed, ISI marked complete all as specified.
S&F cast iron nahani trap with grating to 75mm bore including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 all as specified
Cast iron soil, waste and vent pipes, sand cast, 75mm dia in any length with or without ears with cement joints, laid in trenches or in floors in repair.
Cast iron soil, waste and vent pipes, sand cast 100mm dia in any length with or without ears with cement joints, fixed to wall in repair.
S&F in repairs 75mm bore bends(any radius) with duck foot or heel rest all as specified .
S&F in repairs 100mm bore bends(any radius) with duck foot or heel rest all as specified .
S&F in repairs 100mm bore bends/reducer (any radius) diminishing pieces or tapers (larger bore measured) all as specified.
M&L machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete incl 15mm thick screed bed in CM 1:6 etc complete all as specified and directed by Engr-In-Charge.
M&L machine cut kota stone slab flooring 20-25mm thick over cement sreed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete and including10 mm thick rendering in cement mortar 1:3 complete all as specified and as directed by Engr-in-Charge.
Sheet glass 3mm thick ordinary quality and glazing with beading/oil putty in square n/exc 0.5 Sqm each pane complete all as specified and directed by Engr-in-Charge.
Cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete all as specified.
Walling of random rubble stone masonry un-coursed well bonded, bedded and solidly hearted, built in cement mortar (1:6) including providing weep holes complete all as specified (if PCC bond stone shall be measured and paid separately).
Precast cement concrete 1:3:6 type C1(using 20mm graded crushed stone aggregate) set in cement mortar 1:6 as in bond stones of any thickness and size or shape complete all as specified and as directed by Engr-in-Charge.
Plain Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping, benching including weathering slightly rounded or chamfered angles as directed including necessary form work and finishing the exposed surfaces complete all as specified.
Extra over stone walling for hammer dressing to face stone and dressing of face beds and joints as specified of random rubble walling, un-coursed or brought up to course, hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 20mm for granite or trap stone , all as specified.
Hand packing (any thickness) of broken stone boulders at back of wall over arches etc and raising (or lowering) to the required level complete all as specified and as directed by Engr-in-Charge.
Extra for forming fair finished drain or channel 30 cminner girth in cement concrete using extra cement including forms, moulds, mitred/ stop ends etc complete all as specified and as directed by Engr-in-Charge.
PVC pipe 110 mm dia low density of pressure rating 10Kg/Sqcm (in short lengths) fixed in walls as weep holes as in retaining wall complete all as specified.
Raised pointing to random rubble walling uncoursed in CM (1:3) complete all as specified.
Chequered Cement Concrete tiles hard glazed rubber top 20cm x 20cm x 25mm thick made using vibratory mechanical system having glazed top layer with mixture of white cement and pigment, set, jointed in neat cement slurry in floors laid on and including 20mm thick screed bed complete all as specified and directed.
75mm thick PCC 1:4:8 type D1 (using 20mm graded stone aggregate) as in Sub base complete all as specified and directed.
PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foudation for fencing post filling, and mass concrete, complete all as specified and directed.
Excavating in post holes (or similar holes) as in hard/dence soil each n exc 0.5 cu. m, getting out, complete all as specified and directed.
Excavation over area not exc 1.5m deep in any type of soil and getting out complete all as specified and directed by Engr-in-Charge.
Excavating in trenches, as in hard/dense soil n exc 1.5 m wide and n exc 1.5 m in pth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.
Surface excavation (not exceeding) 30cm deep and averaging 15cm deep and getting out in Soft/loose soil complete all as specified as directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified.
Removing surplus spoil to a distance n exc. 50m and deposited where directed at a level not exceeding 1.50m from the starting point., all as specified .
M&L machine pressed interlocking paver blocks glossy finish any shape and size conforming to I IS 15658-2006 OF 60mm thickness, M-35 grade with grey cement and pigment over & including 50mm thick sand cushion all as specified..
M&L 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, Pillers, window-clips, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Granite including moulding of edges visible to naked eye complete all as directed
Anodised aluminium frame for door , windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.
Anodised aluminium door shuters, alumiinum section weghing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed by Engr-in-Charge.
4.80mm thck sheet glass ordinary quality and glazing with beading in square n/exc 0.5 Sqm each pane, complete all as specified and as directed.
S&F of 12mm thick toughned glass as in slidding dooors, partitions automatic doors and similar work including cutting to shape, drilling holes requred including necessary joining cleats, handles, clips, slidding roller strip, screws etc complete all as specified and directed by Engr-in-Charge.
Material & Labour for providing and fixing stainless steel (Grade 304) railing mode of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steeel bolts etc, of required size, on the top of floor or the side of waist slab with suitable arrangement.
Mild steel cromium plated 20mm dia (curtain rod) with fixing brackets, stops, toller etc complete all as specified and directed. Fixed in repairs.
Health faucet, brass, chromium plated, with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, fixed in repair complete all as specified and directed.
Jet spray, rass, chromium plated, heavy duty, including flexible pipe suitable for 15mm bore water connection ; for EWC fixed complete all as specified and as directed. Make : Jaquar, Cera or equivalent as approved by GE
Plastic water closet seat, white colour closet pattern with flat bottom and cover and incl mild steel chromium plated or aluminum hinges device complete fixed in reapirs, all as specified.
Tumbler holder, brass, chromium plated, heavy duty, having suitable recesses made for hinging necessary bath items complete fixed with brass screws as per manufacturer's instructions. Make : Jaquar Cat Part No. AQN-7741, Cera -F 5002107 as approved by GE.
Vitreaus china, white, WHB pedestal flat back of size 550 x 400mm, white including MS bracket & pedestal pattern inclusing utting for & pinning including 32 mm dia CP brass waste coupling & PVC waste pipe fixed in repair complete all as specified and directed.
S & F of grating doom 100mm dia of PTMT, complete all as specified and directed.
S & F of grating doom 125mm dia of PTMT, complete all as specified and directed.
Taking down carefully point wiring copper/aluminium (light, fan, socket, and power) complete (fittings such as switches ceiling roses, pendent regtulators sockets etc to be measured and paid for separately removing materials to store for keeping of safe custody and making good the disturbed surfaces complete all as specified and as directed.
M&L for point wiring with PVC insulated unsheathed, FRLS 1100 volts grade stranded copper conductor cable single core 1.5 Sqmm for one light / fan point/bell point controlled by one way switch, and wire to be drawn in and including concealed conduit of dia not less tham 25mm complete with all accessories including MS sheet metal 1.2 mm thick switch board of suitable size be fixed flush wall , with 3 mm thick ebonite sheet cover and necessary screws, cap washers etc. or to be fixed on wall respectively as directed by EIC and providing earth continuity wire using PVC insulated, un sheathed single core stranded copper conductor FRLS cable of size 1.5 Sqmm complete all as specified.
All as per item No 4 above but M&L for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi standed copper conductor of size 2.5 Sqmm drawn through in and including PVC conduit size of not less than 25mm concecled in wall/ surface including provn of pressed steeel terminal box of suitable size with 3mm thick plastic laminated sheet cover for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 2.5 sqmm and for one 6 pin molular socket outlet wo in one 16/6 amps on an independent board incluidng colour coding of cable shall be Phase-Red, Neutral-Black and Earth-Green and making ood, disturb surface as it is complete all as specified and directed by for the following.
All as per item No 1 above but for one 3/5 pin socket 6 Amp on same board with cable1.5sqmm size.
All as per item No 1 above but for one 3/5 pin socket 6 Amp on independent board with cable1.5sqmm size.
All as per item No 1 above but for 3 pins socket outlet 16 Amps independent with 2.5 sqmm cable incl continuous earthing with multistandard copper conductor PVC insulated unsheathed size 2.5 Sqmm complete all as specified and directed.
S&F Switch Piano flush type single pole 6 Amps One way, complete all as specified and directed by Engr-in-Charge.
S&F socket flush type single pole 6 Amps One way, all as specified and directed .
S & F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal.
S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd.
S&F Ceiling rose, 3 terminal, PVC / polycarbonet, isolated body complete all as specified and directed .
S&F Slim linear LED lighting fixture 20 watt LED batten, with full base of extruded aluminium section acting as a heat sink with closed back, isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete including taking down old US tube light fitting 1x36W and taken in schedule of credit all as per the directed and as per the sample approved by GE.
S&F in replacement E-Lite LED Curve lighting fixture for mirror 10/12 watt LED batten,2' long with full base of extruded Aluminium body environmental friendly, energy efficient ready to use pack with isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete including taking down old unserviceable tube light fitting 1x 18 watt from the site reuse to measured separately or disposal by credit all as per the directed and as per the sample approved by GE.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete and as per the sample approved by GE.
Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.
S&F wall mounting fans 110 watt, (white colour) 2200 RPM high speed motor innovative design, aesthetic looks, aerodynamically designed and balanced blade for superior air delivery, tilt adjustment for adjusting the fan upward & downward at desired angle jerk free and uniform oscillation elegantly designed fan base strong wall mounting metal clamp, long lasting powder coated guard set and polymer ring for anti corrosion complete all as specified and directed by Engr-in-Charge.
Taking down fan, ceiling cable end, dismantling blades and kept in safe custody for refixing on same location all as specified and directed .
S & F LED Bulk head (6500K) fitting of 09/10 Watt surface Mounting type extruded aluminium body with diffuser complete with testing all as specified and directed by Engr-in-Charge
M&L for repair of ceiling fan/exhaust fan 1200/300 mm sweep of any make obtained from above item, oiling, greasing cleaning slot, over hauling & replacement of defective nut bolts washer etc including painting. If as per site requirement fan will be found burnt rewinding will be provide by the contractor as per unit quoted rate all as specified and directed.
Supply and fixing Exhaust fans steel body, AC ingle phase 230 volts of size 300 mm sweep with blades and frame and louver complete all as specified and directed. Make : Havells, Usha, Crompton.
Supply and fix electric water heater, storage type steel body with stainless steel glass coated inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. Make : Havells, Crompton, V Guard.
S&F 'C' series TPN MCB 40 to 100 Amps 415V ,50Hz,10kA,"C" curve lighting and other domestic loads incl all termnials, fitting etc.
S&F 'C' series TPN MCB 40 to 63 Amps 415V ,50Hz,10kA,"C" curve lighting and other domestic loads incl all termnials, fitting etc.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Make : Crompton, Havells, Philips.
M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC Concealed Conduit as per site requirement including taking down old us submain wiringand direction by EIC, all accessories complete all as specified and directed.
S & F Triple pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 415 V, 50 Hz supply double door TP&N DB system 4 ways complete all as specified and directed.
S & F Single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 415 V, 50 Hz supply double door TP&N DB system 8 ways complete all as specified and directed.
S & F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 12 ways complete all as specified and directed.
Supply and fix isolator Four pole 100 Amp 415V.
M &L for replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt capacity complete as as directed by Engr-in-Charge
S&F 'C' series SPN MCB 40 to 63 Amps 240V ,50Hz,10kA lighting and other domestic loads incl all terminals, fitting etc.
S&F 'C' series SP MCB 06 to 32 Amps 240V ,50Hz,10kA suitable for lighting and other domestic loads incl all terminals, fitting etc.
M&L Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-5 of MES Part-1 fixed in replacement including testing on completion including the material and labour of the following :- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC Pit in cement concrete 1:2:4 type B-1. (c) Precast RCC cover with suitable handle 40mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (d) Funnel with watering pipe of GI protection pipe 5 mtr long for protection of earthing lead from mechanical injury or tempering. (f) Requisite quantity of common salt and charcoal. (g) Testing of Earthing.
S&F Electric bell(Ding dong) AC 230/250 volts grade single pole ISI marked fixed in replacement, complete all as specified and as directed.
Supply and lay XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core in trenches / floor / pole / Gl pipe complete including cutting / chasing to any surface and making good to the disturbed surface to match the existing all as specified and directed.
M & L for dry sand cushioning to under ground cables provided with a layer of sand 8 cm deep before laying the cable , 15 cm depth after laying & stretching the cable all as specified and directed.
Supply and lay brick class 'B' covering as aechanical protection to cable with well burnt all as specified and dy Engr-in-Charge
M&L GI tubing light grade with all fitting and fixed in wall and floor or fixed to pole of size 40mm dia ll as specified and directed by Engr-in-Charge
s l sharma and sons
anil construction co.
TULSI RAINA AND SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .