Construction of lecture theatres and examination hall in parking constructed opposite to Auditorium block at IGMC Shimla. SH Providing various electrical services therein.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group C

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizesof FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

Wiring for Circuit/Submain Wiring with 4X1.5 sq. mm FRLSH PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos 1.5 sq. Mm (4x1.5 Sq.mm +2x1.5 Sq.mm) FRLSH PVC insulated copper conductor single core cable for loop earthing as required.

Providing and installation of following type of recess/surface mounting 2 feet by 2 feet type LED Panel with PDC/CRCA aluminium housing ,anti glare prismatic multilayer diffuser complete with all accessories, connections, testing etc. as required: of approved Make

Wattage of LED fittings- As per following parameters

Total Lumens of the fittings-4320 Lumens.

Diffuser-Prismatic multilayer diffuser UGR<19

Operating voltage-140 V to 270 V, AC supply or better.

Input frequency-50 Hz + 1 Hz

Power factor-Minimum 0.90

Luminaire efficency->120 lm/w

Color rendering index-CRI shall be 80

Working/ operating temperature-0 to + 45c or better

Color temperature-6000K to 10%

Electronic Driver

Drive current (LED)-As per OEM.

Operating voltage-140 V to 270 V AC supply or better

Type of driver-Constant current output driver

THD-Less than 10%

Surge Protection-2.5 KV minimum

Efficiency Driver->85%

Protection-Shall have under voltage and over voltage protection.

Fixture-Should comply with LM 79 test from NABL/UL lab.

LED Type/ Make/ Model-Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.

Life of LED-50000 burning hours at 70% lumen maintenance

LED Panel 2x2 >4320 Lumens.

Supply & Erection of LED Downlighter round type surface with CRCA/PDC aluminium body and diffuser The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings.

Wattage of LED fittings- As per following parameters

Total lumens of the LED fittings- as per individual fittings mention below

Body of fittings-CRCA steel sheet with opal acrylic diffuser/ Extruded al. Housing CRCA front frame opal diffuser/CRCA power coated housing with high efficiency translucent diffuser.

Operating voltage-150 V to 265 V, AC supply or better.

Input frequency-50 Hz + 1 Hz

Power factor-Minimum 0.95

Luminaire efficacy->100 lm/w

Color rendering index-CRI shall be 80 (minimum)

Working/ operating temperature-0 to + 45c or better

Color temperature-6000K to 6500K

Electronic Driver

Drive current (LED)-As per OEM.

Operating voltage-150 V to 265 V AC supply or better

Type of driver-Constant current output driver

THD-Less than 10%

Surge Protection-2.5 KV minimum

Efficiency Driver->85%

Protection-Shall have under voltage and over voltage protection.

Guarantee of LED fittings including LED driver-5 years against manufacturing defect.

Fixture-Should comply with LM 79 test from NABL/UL lab.

LED Type/ Make/ Model-Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.

Life of LED-50000 burning hours at 70% lumen maintenance

LED Down Light Surface > 1800 Lumens.

Providing and installation of following type of LED Batten with aluminium housing ,anti glare polycarbonate diffuser, complete with all accessories, connections, testing etc. as required of Approved Make

Wattage of LED fittings- As per following parameters

Diffuser-polycarbonate diffuser/PMMA

Operating voltage-140V to 270V, AC supply

Input frequency-50 Hz + 1 Hz

Power factor-Minimum 0.90

Luminaire efficacy->100 lm/w

Color rendering index-CRI shall be greater than 80

Working/ operating temperature-0 to + 45c or better

Color temperature-6000K to 10%

Electronic Driver

Drive current (LED)-As per OEM.

Type of driver-Constant current output driver

THD-Less than 10%

Surge Protection-2.5 KV minimum

Efficiency Driver->85%

Protection-Shall have under voltage and over voltage protection.

Guarantee of LED fittings including LED driver-5 years against manufacturing defect.

Fixture-Should comply with LM 79 test from NABL/UL lab.

LED Type/ Make/ Model-Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 25000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.

Life of LED-25000 burning hours at 70% lumen maintenance

LED Batten Light >2000 Lumens.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole. Cat-A.

Supplying and fixing following rating, followings poles 10ka 240/415v 'C' curves miniature circuit braker suitable for inductive load of following poles in the exsisting MCB DB complete with connections, testing and commissioning etc. as required.

MCB DP 40 Amp

MCB DP 63 Amp

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

RCCB 63 A

RCCB 40 A

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Approved make Havells,L&T , ABB, legrand ,Schneider & C&S.

8 way Double door

12 way , Double door

Installation of ventilatinmg /exhaust fan in the existing opening, including making good BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor the damage, connection, testing, commissioning etc. as required.Supply & Erection of Ventilating Fan ) following size complete with motor,, with minimum power consumption, rigid frame with rubber mounting for silent operation, in the existing opening including cost of making the hole to suit the size of above fan making good the damage, Carriage Charges connection, testing, commissioning etc. as required to complete the job to the entire satisfaction of EIC.

Exhaust Fan, 250 mm sweep

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.

Armoured cable 25 sq. mm (3.5 core)

Armoured cable 300 sq. mm (3.5 core)

Providing and fixing 3 Module LED Foot Light complete with connections etc. required and as per the satisfacttion of Engineer-in-charge.

Supplying and fixing G.I. 3 Module Box complete with connections etc. required and as per the satisfacttion of Engineer-in-charge.Make: Anchor, Panasonic, Havells etc.

Providing and fixing 12 way vertical TPN Distribution Board with MCCB incomer with IP 43 - Metal Door and Conforming to IS 8623-1 & 3, IEC 61439-1 & 3 made with CRCA sheet steel, RAL 9003, powder coated with accessories and provided with insulated vertical phase bus-bars neutral bar/s with shroud/s earth bar/s , sticking saddles ,cement spill protector , color-coded interconnecting wire set , cable ties , blanking plates and circuit identification labels like neutral bar/s with shroud/s , earth bar/s, sticking saddles , cement spill protector , cable ties , circuit identification labels complete in all respects and approved by Engineer-in- Charge.Make: L&T, Schneider, Siemens, ABB, Standard or any other equivalent make approved by Engineer-in- Charge:

S/E of MCCB 4 Pole 415 Volt. with Thermal Magnetic Release for overload and short circuit protection breaking Capacity (Ics=100% Icu with positive isolation) with/ without Spreader/ Rotary Handle.

MCCB 40- 100 Amp. 36 ka 4 Pole Release without rotary handle

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. witht charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Supplying installtion testing and commissioning of Floor mounted main LT Panel Enclosure Cubicles design verified assemblies completely as per IEC61439-1&2 having IP42 enclosure protection having form 3B construction duly tested with IK10, shall be of aesthetic design, dust, damp & vermin proof, shall be modular, extendable and shall have maintenance friendly construction, shall have fully compartmentalized bolted construction, shall be metal clad sheet steel enclosed cubicle, floor mounting type suitable for indoor installations, shall have structural steel framework as per IEC 61439 part 1 & 2, shall have integral base frame with bottom cable entry having removable gland plates.The size of panel should be (Size L=1900MM X H=2275MM X D=440MM (Approx.) The panel shall be made out of GI Sheet Steel & CRCA Sheet Steel. The CRCA Steel parts shall be powder coated with RAL7035 powder colour after proper 7Tank Chemical Treatment. Gasketing shall be done properly to prevent any ingress of dust & vermin .The panel should have following specifications:-

INCOMER :

300A(400A) FP 50kA MCCB M.P RELEASE WITH O/L, S/C & E/F PROT.(1 No.)

EXTENDED ROTARY HANDLE FOR MCCB - 300A . (1 No.)

SPREADER SET FOR FP MCCB - 300A .(1 No.)

MFM 4405 LED METER CL 1 WITH RS485 .(1 No.)

CT 300/5A CL-1.0, 15VA RESIN CAST/NYLON CASE FOR METERING .(3 No.)

MCB 6A SP 10KA, C-CURVE .(3 No.)

PHASE INDICATION LAMP LED TYPE RED - 230V AC .(1 No.)

PHASE INDICATION LAMP LED TYPE YELLOW - 230V AC .(1 No.)

CT SHORTING LINK .(4 No.)

NEUTRAL LINK .(1 No.)

ON LOAD MANUAL CHANGEOVER (SUB INCOMER)

300A(315A) FP MANUAL CHANGEOVER ON LOAD SWITCH .(1 No.)

PHASE INDICATION LAMP LED TYPE RED - 230V AC .(2 No.)

PHASE INDICATION LAMP LED TYPE YELLOW - 230V AC .(2 No.)

PHASE INDICATION LAMP LED TYPE BLUE - 230V AC .(2 No.)

MCB 6A SP 10KA, C-CURVE .(6 No.)

NEUTRAL LINK .(2 No.)

OUTGOING FEEDERS

63A FP 25kA MCCB TMD RELEASE, Ics=100% Icu (4 No.)

EXTENDED ROTARY HANDLE FOR MCCB - 63A (4 No.)

125A FP 25kA MCCB TMD RELEASE, Ics=100% Icu (1 No.)

EXTENDED ROTARY HANDLE FOR MCCB - 125A (1 No.)

SPREADER SET FOR FP MCCB - 125A (1 No.)

OUTGOING MCB's

MCB 63A DP 10KA, C-CURVE

MAIN AL. BUS BAR

300A Tp+N Aluminium Bus Bar Duly Insulated With Color Coded Heat Shrinkable Sleeves With Supported With Bus Bar Supports And Insulators - Dmc/Smc.Cross-Section Area Considered As Per Tta 1r X 50 X 10 For Phases ,1r X 50 X 10 For Neutral,1r X 50 X 06 For EARTHING Complete With All Respects As Per Satisfaction Of Engineer-In-Charge.

20 KVA UPS

Supply Installation Testing & Commissioning of 20KVA/20 KW Online UPS : Three Phase Input & Three Phase Output- Autosensing, True Online UPS with Full Digital Signal Processing (DSP )Technologies with Touch Screen (LCD /LED ) display Panel & Pure Sine Wave O/P . UPS unit shall operate in double conversion mode, it shall be a VFI-type UPS (as per stanard IEC 62040-3).UPS along with same rating Inbuilt / stand alone K rated Galvanic ISOLATION Transformer of same OEM make only. UPS should be with Latest IGBT Based Rectifier & Inverter Technology. UPS should have minimum 30 minutes backup on SMF Batteries Bank with Minimum VAH = 18000 VAH,along with following features/specifications The job includes the cost of Supply, installation, commissioning and testing charges including rack, connecting and other petty material required to complete the job.

The UPS should have following specification.

INPUT FEATURE :

Input Voltage window 320 VAC - 480 VAC 3 Phase

Input Frequency window 45-55 Hz .

Nominal Frequency 50 Hz

Total Harmonic Current Distortion (THDI ) should be less than 3 % at full rated load

Input power factor (PF) greater than or equal to 0.99

OUTPUT FEATURE :

Output Power Factor should be unity.

Output Power Capacity in watts (KW) 20KVA / 20KW

Output Voltage - 380 / 400 /415 Volts rms, adjustable via the user interface.

Total Harmonic Distortion : < 2% for linear load & < 5% for 100% non-linear load

Output Frequency range 50/60 HZ.

Other Features

UPS overall Efficiency : upto 94% ( AC to AC i.e Online Mode) and 98% ( Eco Mode ) without Isolation transformer losses

Overload Capacity: A) 10 minutes at a load representing 125% , B) 60 second at a load representing 150%

Parallel option : Parallel option upto 4 Units should be available

Bypass : UPS Should Be built in Manual and Maintenance Bypass feature

Operating Temperature : 40 degree C

Noise Level :Less than 65 dBA

Emergency Power Off (EPO) Should be available as standard

Protection requried :TVSS inbuilt ,over volatage,short circuit ,overload at UPS O/p and Under Voltage at battery terminal,input phase sequence protection feature,with dust filters and inbuilt TVSS device for surge protection.

UPS should has feature of common battery bank up to at least 2 units.

Isolation :UPS Should be with same OEM make inbuilt Isolation Transformer at Input side.

Communications & Management :-

Interface ports : USB/ RS 232 & optional SNMP .

Touch Screen LCD Display and LED indicators

Alarms : Audible Alarm required for Mains failure, Low Battery, Inverter Trip, Over Temperature, Over Load

Safty Standard & Certifications and Test reports

ISO 9001 & 14001,45001 certified OEM ,Safety Standard: IEC62040-1, EMC: IEC62040-2, Performance IEC62040-3 , along with CE/UE certification. Product should be ROHS / PEP & REACH certified And IP20 Protection ,Quoted model should be tested by SAMEER/ERTL/NTH or any Govt. approved NABL Accredited Lab. Bidder to submit the type test report from any Govt. LAB /NABL accredited LAB in supporting to above technical parameters.

Warranty Terms : Five Years on UPS & Three Years on Batteries onsite service Support

Approved Make : APC- Schneider / Vertiv -Emerson/Legrand-Numeric Only for UPS & Exide, Quanta & Panasonic for SMF Batteries. .

SERVICE & Support : OEM should have 3-4 own /ASP based registerted service centers in the state for better & timely service support, need to share at least 2 engineers contact details with service center address details in the region of installation and OEM Turnover should not be less than 500 Crores/year in last 3 financial years with profitability. 10 years presence of OEM in Govt. project segment And Quoted product should be available on OEM Website with as per asked technical specifications

Battery Bank : UPS unit shall be equipped with its independent battery bank of the following:

VRLA type, mounted on a rack with a design life of 3 yrs as per OEM , Sealed Maintenance Free - Lead Acid Battery with suspended Electrolyte (Leak Proof)The battery shall be sized to ensure continuity in the supply to the inverter for 30 minutes for a power rating of 20KVA at full rated load & 1.7 ECV.

Battery Type : DC Voltage Bus with Flexibility of at least 4-6 no. of Batteries , Min. 30 Mins Backup , 12V Batteries will be provided by firm Minimum required VAH per UPS =18000 VAH.(12V,75Ah 20 no. batteries)

DC Battery Breaker : For safe maintenance on the battery of UPS unit, the system shall include a circuit breaker to isolate the battery from the corresponding rectifier /charger and inverter. When the battery is isolated from the system, the UPS shall continue to supply the load without interrup-tion or disturbance, except in the event of a normal AC source outage.

Battery Rack & Links - Racks Suitable for Mounting the All Batteries each Sheet Metal Type along with interconnection cables and 5/7 meter wire from UPS to battery bank.

Approved Make:APC-Schneider, Vertiv- Emerson, Numeric- Legrand only for UPS & Exide / Quanta/Panasonic for Batteries or as approved by Engineer-in-charge

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required

Armoured cable 25 sq. mm (3.5 core)

S/E of MCCB 4 Pole 415 Volt. with Thermal Magnetic Release for overload and short circuit protection breaking Capacity (Ics=100% Icu with positive isolation) with/ without Spreader/ Rotary Handle.

MCCB 40- 100 Amp. 36 ka 4 Pole Release without rotary handle

Supplying and fixing TP&N copper bus-bar chamber suitable for 415 volts capacity with 4 No. copper strip bus-bars each of length and x-section suitable for following current carrying capacities, enclosure made of sheet steel having thickness of 1.6mm, dust protected, duly powder painted with detachable gland plate and other accessories including drilling holes on the board, making connections, earthing etc. as required

63 A Copper Busbar Chambers 15" (SS Enclosure)

Variable Regrigerent Flow

Supply, Installation, Testing & Commissioning of factory fitted mircoprocessor based self diagnostic auto check VRV/VRF system outdoor unit equiped with PCBs, accumulator, oil seperator, burshless DC inverter fan motor, OEM self manufactured hermetic sealed multi valve scroll type compressors. Compressor should be based on low pressure shell technology for longer life with integrated IPM & PWM to ensure effective operation even at low/partial load conditions for better efficiencies. Compressor shall be fixed in metallic chamber for lower noise with enhanced fire saftey protection. Outdoor unit shall be equiped with highly efficient induction type heater using eliminated wasted heat. VRT/VET system shall be based on advanced & automatically modulation evaporating refrigerant temperature between 0°C to 11°C for instant cooling and better energy effiency as per user's demand. Outdoor units shall be essentially equiped with saftey devices like fuse, noise filter PCB, low pressure switch, high pressure switch, pulse based LEV for optimized refrigerant flow control, isolating valve, protective corrosion resistant polyster coating on panels, hydrophilic coating on Aluminium fins, protective polyeurethane coating on PCB, OEM provided Inbuilt automatic reverse phase detector & sequencer/corrector to avoid any kind of failure due to phase sequence reversal which makes system relaible and redundant. Heat exchanger must be essentially equiped with internally grovved copper tubes for better heat exchange performance and operate in extreme conditions i.e. even at ambient temparature of 52°C or more. Outdoor units shall be pre-charged with R401A gas, pump down fucntion and shall also be equipped with charging valve/ports for additional charge of refrigerant as per site requirement. All outdoor unit shall be able to perform in duty cycle mode to optimize wear and tear of system when more than one outdoor unit is connected to a circuit. Outdoor units must also be equiped with four way valve for necessary provision of heating during winters. All outdoor shall have approximately following as per OEM standards rated capacities at ARI conditions and, with the criteria of delivering 95% capacity at 43 °C being most likey temperature to occur during summers. (All Unit shall confirm the detailed specification of tender document and providing power/ control cabling/earthing of indoor unit complete with supplying of all material in all respect as per specifications and any other items required to make the system complete as required)

The manufacturer of ODU and compressor shall be same. i.e. the make of compressor shall be identicle of the ODU.

Make :Mitsubishi, Daikin, O General, Trane, Carrier, LG, Bluestar or any other approved by Engineer in Charge

Nominal Capacity in HP as stated below:

Outdoor Unit -26 HP

Outdoor Unit -24 HP

Outdoor Unit -20HP

Supply, Installation, Testing and Commissioning of VRV/VRF indoor units with factory fitted electronic expansion valve, multi speed fan motors, dynamically balanced blowers, synthetic washable plasma media filter with hydrophobic coating on cooling coil. Electronic components like PCBs must be essentially enclosed in a metal box compartment being integrated part of indoor unit to ensure enhanced fire protection with auto by pass technology allowing uninterupted operation of indoor units connected to a circuit in event of break down in any indoor connected to same circuit. All indoor units shall have individual fan speed and temperature control mechanism to be operated from corded/cordless remote. In addition to all indoor units can also be operated from central remote control. (All Unit shall confirm the detailed specification of tender document and providing power/ control cabling/earthing of indoor unit complete with supplying of all material in all respect as per specifications and any other items required to make the system complete as required) Make :Mitsubishi, Daikin, O General, Carrier, LG , Trane, Bluestar or any other approved by Engineer in Charge.

Cassette Type Indoor Unit - 4.1 TR

Cassette Type Indoor Unit - 3.2 TR

Supply and installation of Refrigerant Piping Y/T-Joints or Headers as required to connect the above outdoor units and indoor units. ( liquid and gas line as one set)

Supply and installation of Refrigerant Piping Twinning Kit Joints or Headers as required to connect the above outdoor units ( liquid and gas line as one set)

Supply installation testing and commissioning of Corded remote complete in all respects as per satidfaction of Engineer-in-Charge. Make :Mitsubishi, Daikin, O General, Trane or any other approved by Engineer in Charge

Supply installation testing and commissioning of Centralized remote complete in all respects as per satidfaction of Engineer-in-Charge.Make :Mitsubishi, Daikin, O General, Trane or any other approved by Engineer in Charge

Providing Refrigerant Charges for the complete system-R410A complete in all respects as per satidfaction of Engineer-in-Charge.

Drain Piping:

SITC of PVC (Minimum 15 Kg/Sqcm pressure rated) Drain Water Piping complete with fittings (elbows, tees, reducers, sockets etc.), supports, jointing and any other item required to make the system complete. Nominal Diameters of Pipes in mm as indicated below:

25 mm ( with 9 mm Class- O XLPE)

SITC of Copper Refrigerant piping for VRV / VRF System complete with fittings, supports, jointing, insulation with class O -XLPE , gas charging & commissioning as per specifications, all accessories as per specifications and any other item required to make the system complete. Nominal Dia in mm OD as indicated below :Make : Rajco/Maxflow/Mandev/Jobu/MTL

41.3 ( with 19 mm insulation )

34.9 ( with 19 mm insulation )

31.6 ( with 19 mm insulation )

28.6 ( with 19 mm insulation )

25.4 with 19 mm insulation)

22.2 with 19 mm insulation)

19.0 with 19 mm insulation)

15.9 (with 13 mm insulation)

12.7 ( with 13 mm insulation )

9.5 ( with 13 mm insulation )

CONTROL CABLING

Providing & fixing control cum transmission wiring of 2 core x 1.5 sqmm copper in suitable conduits between indoor units and outdoor units and indoor units and remote controllers.

Supply and fixing of perforated of indicated thick CRCA GI perforated cable tray painted of required colour, of following sizes complete with bends/tee joints, coupling plate & nuts bolts etc. including Supporting structure as per specification complete as required.

150mm wide & 60mm deep x 1.6mm thickness

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-

Supply, Installation, Testing and Commissioning of Interactive panel AILive Board-Core X110HC - PeopleLink's 110" EDLA Certified, AI Whiteboard enabled Automatic Data Processing Unit, 4K UHD Panel with Built-In Android OS, Quad-Core A73, 8GB+128GB Configuration and recognizes up to 40 Unique Points of touch. Included - Built-In 48MP Camera with 8 Microphone array and Additional Ports. with OPS.(MakeChristie/Barco/LG/ SONY/SAMSUNG) . The Interactive panel should have following specifications :- ::

Display Panel Size:110 Inches or higher:

Resolution:3840 × 2160 (4K UHD):

Aspect Ratio:16:9 or better:

Surface:4mm Anti-glare tempered glass:

Brightness:Upto 450 cd/m² or better:

Contrast Ratio:4000:1 or better:

Viewing Angle:178° (H/V):

Response Time:8 ms or less

Backlight Life:≥ 50,000 hours or better

Touch Technology:IR Touch

Touch Points:40 touch points on Android & Windows or better:

Touch Response:≤ 5ms or less

Touch Accuracy:± 1mm or less

CPU:Quad Core A73, 1.5GHz or better

GPU:Mali G52

RAM + ROM:8GB RAM + 128GB Storage or better:

Operating System:Android 14.0 with EDLA Certification

Wi-Fi :802.11 a/b/g/n/ac/ax (2.4GHz/5GHz):

Bluetooth:5.2 or latest:5.2 or latest

Camera:48MP, FOV: D=119°, H=97°, V=74°:

Camera Features:AI-based face tracking, voice tracking, and gesture control:

Microphone:8 Mic Array:

Pickup Range:0–8m, Echo Cancellation, Noise Suppression:

Speakers:2 × 16W or better:

Interfaces (Front):2 × USB 3.0, 1 × HDMI IN, 1 × Touch USB, 1 × Type-C, Power Button:

Interfaces (Onboard):TF Card Slot ×1, USB 2.0 ×1, USB 3.0 ×1, Touch USB ×1, HDMI IN ×2 (1 ARC), HDMI OUT ×1, RS232 ×1, Line Out ×1, Coax ×1, 3.5mm Jack ×1, RJ45 IN ×1, RJ45 OUT ×1, DP IN ×1, VGA IN ×1, VGA Audio IN ×1, USB Type-C ×1:

Whiteboard Features:Multi-touch interactive whiteboard (upto 20 points), handwriting-to-text, AI shape recognition, math/science tools, sticky notes, text editing, real-time collaboration, export to PDF, YouTube & Google integration, browser panel, 3D model viewer, screen capture:

Accessories:Power Cord ×1, Stylus Pen ×2, Wall Mount Kit ×1, Remote Control ×1, User Manual ×1:

Certifications:EDLA (Google Enterprise Device Licensing Agreement), CE, FCC, RoHS:

Supply, Installation, Testing and Commissioning of Digital Podium with CPU -I7 13th Gen / 16 Gb / 512 GB / No ODD / WIN 11 Pro with 3 Year Warranty (Make :-LG/ SONY/SAMSUNG/AHA).The Interactive panel should have following specifications :-

Top&Body:Top and Body should be Metal.:

Mechanism:The system should have a Top Sliding Mechanism.

Keyboard/Mouse Tray:It should have sliding Tray for Keyboard /Mouse

Visualiser Tray:It should have a Provision for Visualiser with a Sliding Tray.

Wheels:Its should have Wheels for easy movement.:

Rack Space:Its should have Rack Space for keeping Amplifier, CPU, Microphone receiver or more equipment.

Screen Size:The system should consist of 21.5 Inches Touch Screen Monitor.

Type:The monitor should be LED backlit.:

Resolution:The monitor should have a native resolution of 1920x1080:

Port:The monitor should come with a USB port for PC Connection.:

Brightness:The monitor should have a Luminosity of 250 cd/m^2 or more.:

Input port:The monitor should have a VGA, HDMI or DVI Input port.:

Supply:The monitor should support Power Supply of 100 ~ 250VAC.:

Gooseneck Mic Frequency:The Microphone should have a frequency response of 40 Hz to 17,000 Hz or better.:

Gooseneck Mic Pattern:The Microphone should have a Cardioids Polar Pattern.:

Gooseneck Mic Port:The Microphone should come up with standard 3 PIN XLR Connector.:

Wireless Microphone System:It should be supplied with 1 Wireless Handheld and 1 Lapel Microphone.The Microphone should have a frequency response of 40Hz to 17000 Hz or better.

Amplifier:The Amplifier should consist of a 100 Watts ( 50 WattsX2): Amplifier should have S/N Ratio of >80dB.

Digital Signal Processor:The DSP should have a 100% Full Duplex Echo Cancelling – no attenuation during full-duplex.:The DSP should have a 100% Full Duplex Echo Cancelling – no attenuation during full-duplex.The DSP should be standard 19 inches Rack Mountable:The DSP should be standard 19 inches Rack Mountable.The DSP should have 1 X 6.5mm Mic input, 1xUSB 2.0 Audio USB port, 1x 2RCA and 1x Pheonix Line-In port as input ports from day 1.:The DSP should have 1 X 6.5mm Mic input, 1xUSB 2.0 Audio USB port, 1x 2RCA and 1x Pheonix Line-In port as input ports from day 1.It should have out as 2x pheonix ports, Line-out as 1x 2RCA port:It should have out as 2x pheonix ports, Line-out as 1x 2RCA port.:The DSP Should have sufficient Ports to perform the Acoustic Echo Cancellation for all the microphones.:

:DSP Should have dual capability of Local Sound Reinforcement and Far end Audio to be sent for Video conferencing at the same time without any Noise and Echo. Whatever teacher or student speaks through Collar or hand held microphone and Goosneck microphone all should be Going to Far end Location over Video Conference and also should comeout of Speakers for local Sound Reinforcement so that everyone present in class can also hear clearly.:DSP Should have dual capability of Local Sound Reinforcement and Far end Audio to be sent for Video conferencing at the same time without any Noise and Echo. Whatever teacher or student speaks through Collar or hand held microphone and Goosneck microphone all should be Going to Far end Location over Video Conference and also should comeout of Speakers for local Sound Reinforcement so that everyone present in class can also hear clearly.:The DSP should have USB port for integrating with Unified Software solutions like Skype, Lync, etc.:

Speakers:It should be supplied with Two Wall Mount Speakers:It should be supplied with Two Wall Mount Speakers. The speaker should be 50 Watts or more.:The speaker should be 50 Watts or more.The speaker should be part of package of DSP & Amplifier. It should be from same OEM of DSP.:

Laptop Interface with integated Advance Switcher:The system should consist of the atleast following ports on the interface with integrated Switcher having following Ports VGA port, HDMI Port, Audio port, 4 USB Ports, Power Outlet. It should come with integrated button pad controller to switch between HDMI , VGA and USB Ports. It shall have HD video inputs for CPU, 2x Laptop Inputs, Visualiser or more:The system should consist of the atleast following ports on the interface with integrated Switcher having following Ports VGA port, HDMI Port, Audio port, 4 USB Ports, Power Outlet. It should come with integrated button pad controller to switch between HDMI , VGA and USB Ports. It shall have HD video inputs for CPU, 2x Laptop Inputs, Visualiser or more

CPU:i5/16GB RAM/512 SSD with Windows OS:

Supply, installation, testing and commissioning of 16-channel IP Network Video Recorder having dual-core embedded processor with embedded Linux operating system, supporting incoming bandwidth of 150 Mbps and outgoing bandwidth of 120 Mbps. The NVR shall support video compression H.265+/H.265/H.264 with video bit rate ranging from 16 kbps to 16 Mbps and resolutions up to 4K/5MP/3MP/1080P/960P/720P/D1/VGA/4CIF/DCIF/2CIF/CIF/QCIF. Video output shall include 1 channel VGA output up to 1920×1080@60 Hz / 1280×1024@60 Hz and 1 channel HDMI output supporting up to 3840×2160@30 Hz, 1920×1080@60 Hz and 1280×1024@60 Hz. Preview capability shall support 1×4K, 4×1080P and 8×D1 with 1/2/4/6/8 split image display. The NVR shall support manual snapshot in JPEG format, motion detection with 396 (22×18) configurable zones per screen with multi-level sensitivity, privacy masking with 4 zones, audio compression G.711u, 1-channel 3.5 mm audio input and 1-channel 3.5 mm audio output with HDMI audio, and bidirectional talk. Recording modes shall include schedule, motion detection, timing and intelligent analysis alarm. Playback capability shall support 1-channel 4K/5MP/4MP/3MP or 4-channel 1080P synchronized playback with instant playback, local video and local image modes. Advanced playback functions such as fast/slow play, frame play, forward/backward skip, snapshot, backup and precise time-bar playback shall be supported along with calendar, channel and event-based search including ANR, motion, alarm and intelligent detection videos. The NVR shall be provided with 2 SATA interfaces supporting single HDD up to 12 TB capacity, USB backup and local backup facility, digital zoom up to 12X, and event actions including email alert, buzzer, alarm on monitor, upload to control room, recording, snapshot, preview and PTZ linkage. It shall support IPv4, TCP/IP, HTTP/HTTPS, RTMP, RTSP, SMTP (SSL), DHCP, UPnP, NTP and P2P protocols with ONVIF Profile-S interoperability and customizable ONVIF/RTSP/HTTP/HTTPS/RTMP ports. The system shall support user management up to 32 users with secure access through authorized username/password, HTTPS and RTSP validation. Make:Nordern /BOSCH/Mobotix/PELCO/Avigilion/Axis/Geutebruck. ::

Supply, Installation, Testing and Commissioning of of 8TB HDD for Survillence with all required connections and complete in all respects as per the satisfaction of Engineer-in - Charge. Make: WD/TOSHIBA/SEAGATE ::

Supply, Installation, Testing and Commissioning of 55" 4KUHD resolution LED Display , 350 nits brightness or better, Wifi Type support both 2.4 & 5G Standard, Dolby Audio, Built in Wifi and Cromecast, HDMI CEC, HDMI ARC, Built-inBluetooth,20W built in speakers, HDMI 2.0 X 2, AV X 1, USB X 2, RJ45 X 1,24/7 with all required connections and complete in all respects as per the satisfaction of Engineer-in - Charge. LG/Christie/Sony/Samsung:

Supply, Installation, Testing and Commissioning of Layer 2 Switches: 24 Ports 10/100/1000 Mbps PoE + 4 Ports 10G SFP+ Smart Managed Switch, 370W from day1, Support 802.3af/at), Switching Capacity 128 Gbps, MAC Address Table 16K, Packet Forwarding Rate, 95.24 Mpps, Flash Memory 64 MB, DRAM Size 256 MB DDR3, IGMP v1/v2/v3 Snooping & MLD snooping v1/v2, 802.3x Flow Control, HOL Blocking Prevention, LLDP/ LLDP-MED, 802.1D, 802.1W, 802.1s, 802.1Q, 802.1p QOS, SPQ, WRR, WDRR, Bandwidth Control, Static routing, IPv6 Neighbor Discovery (ND), ACL Max. 768 rules shared by IPv4, MAC, & IPv6, Traffic segmentation, ARP Spoofing Prevention, ARP Inspection, DHCP Snooping, MAC authentication, SSH v2, TLS v.1.2, DoS attack prevention, 802.1X Port-based Access Control, Port Security, RADIUS/TACACS+, MD5 authentication, GUI, Full CLI, Telnet Server, TFTP Client, MDI/MDIX, SNMP v1/v2c/v3. Internal/External 6 kV surge protection on all RJ-45 access ports, Operating Temperature -5 to 50°C, Storage Temperature -20 to 70°C, Operating Humidity 0% to 95% relative humidity, Certifications: UL, CE, FCC, RoHS, MTCTE/TEC-ER (as notified vide Indian Telegraph (Amendment) Rules, 2017), ISO 27001, IEC-62443-4-1:2018 or Equivalent. OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India. OEM ISO 45001, ISO 27001, ISO 9001, ISO 14001 & ISO 14064-1, Certificate for Industrial Cyber Security Capability (Like - IEC-62443-4-1:2018 or Equivalent). Product Should Approved from TEC under Mandatory Testing & Certification of Telecom Equipment as notified vide Indian Telegraph (Amendment) Rules, 2017. OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India.Make: CISCO/JUNIPER/EXTREME/HP

Supply, Installation, Testing and Commissioning of Wifi Access Points Indoor Enterprise, dual radio, 5 GHz & 2.4 GHz 11ax min 2x2+2x2 MIMO, min 2401 Mbps (5GHz) + min 574Mbps(2.4GHz), Security features WPA3 & Enhanced Open security, RADIUS client, Cipher negotiation & Support External / Internal RADIUS server & Support OFDMA , Wi-Fi 6, IEEE 802.3af & 802.3at, Band Steering, Minimum 2 x dual-band Internal Antennas: Min 3dBi for 2.4 Ghz & 3dBi for 5 Ghz. Support 1024QAM on both of 2.4GHz & 5GHZ, Support 2.4~2.5GHz and 5.15~5.85GHz frequency band, 11ax, 2x2+2x2, high output power design for 2.4GHz/5GHz, 1 x RJ45 console port, 1 x 2.5G Ethernet (PoE) LAN, factory reset, power input, SNMP v1, v2c, and v3, & Compatible with S/W & H/W Controller with addtional features like - Real-Time Monitoring and Alerts, Rich Advanced Features, Centralized Device Management, Role-Based Administration, Real-Time Monitoring, VLAN and Access Control, Auto RF Management and Bandwidth Optimization, Multi-SSID and Captive Portal Authentication.. Fast Roaming Support with 802.11k, 802.11v, and 802.11r and Support Passpoint Wi-Fi (hotspot 2.0) Seamless cellular-to-Wi-Fi carryover for guests. Access Point Should Support Radio & Modulation Schemes for BPSK, QPSK, 16QAM, 64QAM, 256QAM, up to 1024QAM with OFDMA & in complied with ac & b/g/n compliant equipments. Operating & Storage Temperature 0 ˚C to 40 ˚C, & -20˚C to 65 ˚C, Operating / Storage Humidity 10% to 90%, / 5% to 95%. Direct power and Power over Ethernet both options. Wi-Fi CERTIFIED™ Certificate & Certificate lists: www.wi-fi.org / certification / programs, Support Wi-Fi Multimedia, by enabling this feature it will improve the user experience for audio and video applications over a Wi-Fi network. Wall-mounting kit and pole-mounting kit. Wi-Fi CERTIFIED for WMM, W-Fi Agile Multiband. OEM ISO 45001, ISO 27001, ISO 9001, ISO 14001 & ISO 14064-1, Certificate for Industrial Cyber Security Capability (Like - IEC-62443-4-1:2018 or Equivalent). Product Should Approved from TEC under Mandatory Testing & Certification of Telecom Equipment as notified vide Indian Telegraph (Amendment) Rules, 2017. OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India..Make: CISCO/JUNIPER/EXTREME/HP.

Supply, Installation, Testing and Commissioning of Harware Controller Manage up to 500 APs / switches, 4 x 1/2.5G Multi-Gigabit Ethernet Ports, 2 x USB 3.0 ports, LEDs for Power/Status and Ports Status/Activity, power supply external 12V/3.33A 100–240V AC-in, operating temperature 0˚C to 50˚C, storage temperature -20˚C to 70˚C, hardware watchdog, fan, humidity 5% to 90% non-condensing. intuitive user interface, traffic reporting and analytics, remote configuration and batch configuration, configuration backup and restoration, online firmware upgrade (APs / Switches), multi-tenant and role-based administration, searchable and auditable event and change logs, front desk ticket management. User Benefits: Centralized Device Management allowing management of devices, scheduling of configurations, and mass firmware updates via one platform; VLAN & Access Control enabling network segmentation, traffic prioritization, and access policies to enhance security and efficiency; Role-Based Administration to assign role-based access and permissions to ensure secure and localized network control; Auto RF Management and Bandwidth Optimization with auto- adjusting channels, power, and bandwidth to boost connectivity and reduce interference; Real-Time Monitoring & Alerts to generate detailed reports and receive instant alerts from a centralized dashboard; Traffic Reporting & Analytics providing detailed insight to identify trends and optimize network via real-time visualization and reports; Multi-SSID and Captive Portal Authentication to set up separate networks for users with secure, customizable logins for guests and employees; Online Firmware Upgrades to remotely update firmware for the latest features, security, and performance improvements. Layer 2/3 discovery, batch configuration, online firmware upgrades, AP reboot scheduling, wireless scheduling, PoE scheduling. System Management includes setup wizard, role-based administration, multi-site management, REST API support, configuration backup & restore. Network Management VLAN Group, MAC ACL Group, IGMP Snooping, Cable Diagnostics. Captive Portal Authentication supports Web Redirection Only, Local DB, Remote Radius, LDAP, POP3, External Captive Portal, Passcode, MAC Address, Click Through. Auto RF Management, Bandwidth Optimization, and Neighbor AP Detection are supported. Make: CISCO/JUNIPER/EXTREME/HP

Supply, Installation, Testing and Commissioning of Category 6A Unshielded Twisted 4 pair compliant with ANSI/TIA/EIA-568-C.2 and & ISO/IEC 11081. 10GBASE-T (10- Gigabit Ethernet) standard. Bandwidth up to 500MHz complete in all repsects as per satisfaction of Engineer-in-Charge .Make:-BELDEN/PANDUIT/SYSTIMAX::

Supply, Installation, Testing and Commissioning of Category 6A UTP Patch Panel 24 Port 1U Size. Mounts in standard 19 inch racks. Patch panel cable manager for improvement management. Patch panel made from SPCC and 1.5mm or higher thickness with black colour painted. RJ-45 Jack housing PBT + glass fiber, UL-94V-0. RJ-45 Jack contact material phosphor bronze with nickel plated. RJ-45 Jack shield material phosphor bronze with tin plated. All Passive of the same make. (Copper, Fiber & Racks). ISO 9001, ISO 45001, ISO 9001, ISO 14001 complete in all repsects as per satisfaction of Engineer-in-Charge Make: BELDEN/PANDUIT/SYSTIMAX::

Supply, Installation, Testing and Commissioning of Category 6A keystone jacks RJ45, 8 position 8 contact socket. suitable for 22-26 AWG stranded and solid wire. compatible with both 110 & Krone punch down tools. backward compatible with Category 6, and 5e cords and cables. universal design supporting T568 A & B wiring. Category 6A keystone jacks housing made from PC, UL94V-2. RJ45 Jack contact material phosphor bronze with Nickel plated. IDC contact material phosphor bronze with tin plated. All Passive of the same make. (Copper, Fiber & Racks). ISO 9001, ISO 45001, ISO 27001, ISO 9001, ISO 14001 & ISO 14064-1. with all required connections and complete in all respects as per the satisfaction of Engineer-in - Charge.Make: BELDEN/PANDUIT/SYSTIMAX ::

Supply, Installation, Testing and Commissioning of Face Plate Single Keystone Jacksquare with Back Box For Single/Dual Cat 5e/Cat6/Cat6A square with all required connections and complete in all respects as per the satisfaction of Engineer-in - Charge. Make: BELDEN/PANDUIT/SYSTIMAX::

Supply, Installation, Testing and Commissioning of Wall Mount Rack 12U x 500 W x 600 D indoor rack for switch Mounting with Fan & power Strip, PDU, Hardware Mounting Kit. Front Glass Door (tinted, Toughened) with Lock & Key. 2 pairs of 19" Mounting Rails with U-Marking. Provision to mount cooling fans Unit / 90 CFM /230V AC (1 No) on the top panel. Rack shall Conforms to DIN 41494 OR equivalent ISO Standards. Welded Side Walls, CRCA steel Frame & powder coated with highest quality standards. 19” Mounting angles made of formed steel. Depth adjustable mounting slots for verticals provide better mounting flexibility & maximizes the usable mounting space. Top & bottom Panel with ventilation & cable entry facility. Rack Powder coated finish with pretreatment process meeting all industry standards. Grounding & Bonding Options. 100% assured compatibility with all equipment conforming to DIN 41494 (General industrial standard for equipment). Rack Welded to Frame Top & Bottom Cover, Vented & Field Cable entry exit cut outs. Standard Accessories: 1U Cable Manager (1), Hardware Pkt of 20 (1 Pkt), 6 Socket 5 Amp. Power Distribution Unit (1 No), Standard Color : Grey, Static Load : 40 kgs. OEM must possess international certifications for ISO 45001, ISO 9001, ISO 14001, ISO 27001, ISO14064-1. with all required connections and complete in all respects as per the satisfaction of Engineer-in - Charge. Make: D-LINK/RITTAL/NETRACK::

Supply, Installation, Testing and Commissioning of Column Speaker. Sound Pressure Level At 10W/12W : 90.8/108.8db. Effective Frequency Range 80 To 6000 Hz. Rated Power W Mounting Clamp Typewith all required connections and complete in all respects as per the satisfaction of Engineer-in - Charge. Make: EV/Bosch/ Harman/JBL::

Supply, Installation, Testing and Commissioning of Handheld Wireless Mic System That Has A Min Of 14- Hour Battery Life From Two Aa Alkaline Batteries. Cardiod Polar Pattern, Dynamic Microphone , Frequency Response 83hz-18khz, Rf Sensitivity < 1.0 Uv, Image Rejection >55db, Dynamic Range >95db And Receiver Having 30 Channels Possible, S/N Ratio >100db A, Dynamic Range >95db B, Distortion <1 %, Frequency Band: 618-634mhz, Modulation: +/- 40khz.Make: Bosch/ Harman/JBL /Shure

Supply, Installation, Testing and Commissioning of Lapel Wireless Mic System That Has A Min Of 14-Hour Battery Life From Two Aa Alkaline Batteries. Cardiod Polar Pattern, Dynamic Microphone, Frequency Response 83hz-18khz, Rf Sensitivity < 1.0 Uv, Image Rejection>55db, Dynamic Range >95db And Receiver Having 30 Channels Possible, S/N Ratio >100db A, Dynamic Range >95db, Distortion <1 %, Frequency Band: 618- 634mhz, Modulation: +/-40khz.Make: Bosch/ Harman/JBL/Shure.

Supply, Installation, Testing and Commissioning of 1.5mm 2 Core Audio Cable of approved make with all required connections and complete in all respects as per the satisfaction of Engineer-in - Charge. ::

Supply, Installation, Testing and Commissioning of 1 metre Category 6A patch cords approved make with all required connections and complete in all respects as per the satisfaction of Engineer-in - Charge.Make: /BELDEN/PANDUIT/SYSTIMAX ::

Supply, Installation, Testing and Commissioning of O. F.Cable 06F Outdoor - Armoured Unitube SM - HDPE Sheath (OS1). Fiber type 9/125 / G.652D & Refractive Index should be 1.4670/1.4675. Standard ISO 11801, IEC 60793-1/60794-1-2 & ITU-T-REC G.652D. Testing methods in accordance with the following standard Telecordia : GR-20 Core, ISO : 11801. Jacket Thickness 1.8 + 0.2 mm, Outer diameter should be 9 ± 0.3 mm. 3000N/100mm Crush Load (IEC 60794-1-2-E3). Bend Radius (IEC 60794-1-2-E11 & E6) should be Short Term 20D in mm & Long Term 10D in mm. Pulling Tension: Short Term 2000N, Long term 1000N pulling tension (IEC 60794-1-2-E1). Mode field diameter 9.2um ±0.5, Clad Diameter 125um ±1.0. Dispersion At 1285 - 1330nm should be <=3.5 ps/nm.km. Dispersion At 1550nm should be <=18.0 ps/nm.km. PMD value <=0.2 (ps/km). Maximum Attenuation at 1310nm should be <=0.36 dB/km. Maximum Attenuation at 1550nm should be <=0.22 dB/km. Cabled Cutoff Wavelength should be <=1260 nm. Operating Temperature should be – 20 deg C to +60 deg C complete in all respects as per the satisfaction of Engineer-in - Charge.Make: BELDEN/PANDUIT/SYSTIMAX ::

Supply, Installation, Testing and Commissioning of Fiber Termination Box (LIU) 06 Port Rack Mount - Loaded (SC ) SM, 1U height, 19-inch rack mountable. Fiber optic LIU should include with LIU Box itself, Adapter Panel, Adapters & Pigtail as per requirement. Adapter panel - Cold Steel, 1.5mm Thickness. Rubber fiber slotted bracket built-in, metal splice shelf to protect the fibers. 4 Fiber spools Built-In for 900um tight buffered Fiber Storing. LIU shall be Loaded with Optical Fiber Pigtail – SC Type 1 Meter Provide a field installable Single mode SC pigtails to terminate fiber optic cables from cable-to-cable, cable-to-equipment & equipment-to-equipment. Utilize a UPC polishing on the tip to provide high yield during installation. Meet TIA/EIA 568.C.3 standards for repeatability. Buffer diameter 900um Tight buffer, Minimum bend Radius: Install :30mm, Retention Strength: 20N, Cable: 900um Buffered. SM fiber pigtail, the cable type shall be HDPE/LSZH with a diameter of 3.0mm / 2.0mm. Insertion Loss (Max) <0.3 db Max, Return Loss >/= 50 db for UPC. Connector ferrule Ceramic, SC Type Simplex Type, Cable Color Yellow. Repeatability < 0.2dB 200 times Mating Cycle. Working Temp. -10 deg. C to + 70 deg. C, Storage Temp. -20 deg. C to + 70 deg. C complete in all respects as per the satisfaction of Engineer-in - Charge.All Passive of the same make. Make: BELDEN/PANDUIT/SYSTIMAX ::

Supply, Installation, Testing and Commissioning of Single modePATCH CORD LC-LC SM DUPLEX LENGTH- 1metre , 9/125µm Single mode G652D, Duplex Type, (EIA/TIA, IEC, ANSI). Physical Contact (PC) connectors return loss > 45 dB. Ultra Physical Contact (UPC) connectors return loss > 50 dB. Angled Physical Contact (APC) connectors return loss > 60 dB. Repeatability < 0.2dB 1000 times Mating Cycle. Working Temperature –10°C ~+70°C, Storage Temperature –20°C ~+70°C. All Passive of the same make. (Copper, Fiber & Racks)..All Passive of the same make. (Copper, Fiber & Racks)e.BELDEN/PANDUIT/SYSTIMAX ::

Servo Stablizer

Supply Installation Testing & Commissioning of 200kVA Servo Voltage Stabilizer Three Phase Input & Three Phase Output with nput Range: 300V-480V(Phase to Phase), : 170V-280V(Phase to Neutral) Output Voltage: 415Volts +/- %(Phase to Phase): 240Volts +/- 1% (Phase to Neutral)Cooling : Oil Cooled Complete With First Filling Of Transformer Oil with High Low Voltage Cut-Off System/ phase reverse cut off and single phase cut off system and bypass system manual The job includes the cost of Supply, installation, commissioning and testing charges including rack, connecting and other petty material required to complete the job.Make :-Precision , Selvon:

The Servo Voltage Stabilizer should have following specification.:

Technology:Digital Microcontroller Based.

Applicable Standard:IS 2026 & IS 9815

Application:Indoor Type

Supply Frequency:47 Hz - 53 Hz

Efficiency:> 98.6%

Effect Of Load Power Factor:Nil

Wave Form Distortion:Nil

Rate Of Correction:Better Than 36 V/Sec Each Phase.

Duty Cycle:100% Continuous

Response Time:Less Than 10 sec

Overload Capabilities:Up To 200% Momentarily

No Load Losses:Less Than 0.25% Over Entire Range

Suitability:Suitable For 3 Phase Unbalanced Supply & Unbalanced Load

Mode of operation:Automatic/Manual.

Mounting:On Wheels

Earthling:Two Numbers Of Earthing Terminals

Laminations:Low losses CRGO Laminations.

Cable Termination Box:Input / Output Connections

Ambient Temperature:-100 C To 500 C

Relative Humidity:Up To 95%

Temperature Rise:As Per IS Standards.

Carbon Brushes:Imported High Grade Graphite.

Insulation Class:Class – A, Greater Than 6M Ohms

Break Down Strength:1500 Volts AC for 1 Minutes (for whole unit)

Fire Alarm System

Supply, Installation, Testing and Commissioning of Microprocessor based Intelligent Addressable Main Fire Alarm Control Panel with Suitable Loops modules and each loop capable of supporting not less than 250 devices (detectors & modules should be in any combination) ; Loop length up to 1.5 km, 8" Color LCD touch screen display with bright colors to indicate alarms and events, 4 Nos of Integrated Ethernet Ports & 2 Nos of RS 485 for networking, 200 Nos of Soft programmable keys with status indicators for individual triggering of NAC Ouputs, evacuation speaker zones, AHU Modules, Damper switch, Smoke extraction Fans, Lifts.. etc. The Panel shall support 10000 history logs in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 24 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger.The panel should also have IP30 or better protection. The panel shall have seamless integration with EVAC certified Public Address System and shall be complete with all accessories . EN54 / Vds/UL Certification Make Notifire / Bosch./Simens- EN

Supply, Installation, Testing and Commissioning of addressable multisensor smoke detector including mounting base with LED… etc. complete as required with 2 inbuilt Isolators as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 requirements; Drift Compensation feature & Automatic addressing. Detector should monitor Electromagnetic interference and report to the panel - current and average values.Detector should have IP40 or better protection rating. EMC safety for detector shall be 50 V/m. Shall be UL/EN/VDS certification. (Detectors without Inbuilt Isolators may be considered with an additional Isolator Module per detector) Make Notifire / Bosch/Simens -EN

Supply, Installation, Testing and Commissioning of addressable Heat detector with fixed and rate of raise feature including mounting base with LED… etc. complete as required. Each Detector should have 2 inbuilt Isolators as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 requirements. High resistance to electromagnetic effects in accordance with EFSG agreement EFSG/F/97/005 .Detector should monitor Electromagnetic interference and report to the panel - current and average values. Detector should have IP40 or better protection rating. EMC safety for detector shall be 50 V/m. Shall be UL/EN/VDS certification. (Detectors without Inbuilt Isolators may be considered with an additional Isolator Module per detector) Make Notifire / Bosch / Simens -EN

Supply, Installation, Testing and Commissioning of addessable Single ACTION manual pull station & necessary fixing arrangements with key complete as required. MCP should have IP40 or better protection rating Shall be UL/EN/VDS Certified. Make Notifire / Bosch/Simens -EN

Supply, Installation, Testing and Commissioning of Addressable Monitor Module with 1 input, which shall monitor normally open or normally closed contacts.The module shall have an LED to indicate module status.It Shall be UL/EN/VDS Certified. Make Notifire / Bosch/Simens -EN

Supply, Installation, Testing and Commissioning of Addressable Control Relay Module with inbuilt isolators as per NFPA 72 style 7 wiring requirements .Relay Control module shall be used for emergency control functions including shutting down Fire dampers in AHU's, tripping of AHU's, Fresh air fans, Ventilation fans, tripping of Access control doorsetc.. Shall be EN54/ Vds Certification/UL Make Notifire / Bosch/Simens -EN

Supply, Installation, Testing and Commissioning of Glow Type EXIT Sign Board photo luminescent of size 300 mm x 250 mm x 1.5 mm rigid sheet signage containing Zink Sulphate as bare chemical class – 1 material PSPA fixed on 3 mm acrylic sheet on both side showing marking (running man, Arrow and Exit) and hanged with the ceiling with chain and fastener including cost of labour & material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work Make PES/Giolite/OMEX

Supply, Installation, Testing and comissioning of 12 Watts Cabinet Loudspeaker ,Max. Power -18W , Power Tapping -12 / 6 / 3 W, Rated Input Voltage 100V , Sound Pressure Level (at rated power/1W, 1 KHz, 1m) - 96 / 90 db , Effective frequency range ( -10 db ) - 200 Hz – 15000 Hz , Rated input impedence - 833 ohm, Opening Angle ( -6 db ) - 210° / 60° ( at 1 / 4 Khz ) Dimension (HxWxD) in mm 243x236x132 Make Honeywell/ Bosch/Simens -EN

Supply, Installation, Testing and comissioning of 2 core multistrand 1.5 sq mm annealed copper conductor Fire alarm & speaker cable in existing pipe/ channel I/C connection etc.Make Finolex/Polycab/havel's

Supply, Installation, Testing and comissioning of single core multistrand 1.5 sq mm annealed copper conductor speaker cable in existing pipe/ channel I/C connection etc.Make Finolex/Polycab/havel's

Supply and erection of 25 mm dia PVC conduit pipe ISI marked (Medium) recessed in wall /ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect to the entire satisfaction of Engineer-in-Charge of work. Make Diplast/Polyplast

Supply, Installation, Testing and comissioning of 22U Equipment Rack with provision for housing all control equipment with front & rear door, Blower for cooling and proper locking arrangements and as per the specifications, complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Makes: Valrack /Netrack/ Comrack

Supply, Installation, Testing and comissioning of 2 KVA UPS cum Inverter with 1 hour Backup Make LIBERT EINOVA / Luminous/Microtek