Repairing of electrical distribution lines at Armapur Estate, Kanpur.

Amount

M & L for steel tubular swaged poles with cast iron base plate, finial taper complete plug bolts; Nuts & screws as specified type 410 sp-31 ( 9.0 meters long). Note: Steel pole to fixing /placed on the line of existing overhead distribution line. During placing of steel pole top part of the pole must be insulated to avoid any current flowing till dismantling of conductor from existing deteriorated pole and shifting to newly erected pole.

M & L Galvanised stay strand, of 7/4 mm

M & L Aluminium conductor steel reinforced on existing pole.

M & L only galvanised steel wire 4 mm dia. for guarding under LT and HT overhead line as directed by EIC. (NOTE:- Copy of test report carried out within last 5 years on the items of material in a NABL accredited test house or laboratory shall be submitted before supply of material)

M & L of cradles, hexagonal /rectangular, fabricated with galvanised steel wire 4mm dia

M & L earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire directed by EIC.

Fixing only steel tubular sweged pole complete with cast iron base plate, finial type plug, bolts, nuts etc.

S & F of 1100 volts grade heavy duty cable PVC insulated Al. conductor served with inner sheateing of PVC tape and overall PVC sheathed in service connection suspended by insulating hanger not more than 1 meter apart including 4mm suspension wire ,are twin core cable flat or circular,size of aluminium conductor 6 sqmm stranded conductor.

Transporting to store/site and stacking of dismentle steel pole of any size as directed by EIC & WIC.

Dismantling of concrete pole of any size and transporting to store in stacking at EE section.

M & L Pin type, porcelain, vitreous, white brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut,100 height, 65mm dia for 1100 volts grade.

M & L Shackle type, porcelain, vitreous, white brown or green insulator including one galvanised mild steel straps, washers, insulator bolts, washers and nuts as working pressure 1100 volts, height 75mm, max. dia 90mm.

M/L preparation of old or previously untreated surface of any description over 10 cm in width or girth not otherwise described including rubbing & cleaning of steel tubular HT pole and as directed by EIC.

M/L for primming of steel tubular HT pole with red oxide zinc chrome surface of any description over 10cm. In width or girth not otherwise described. Make- Asian / Shalimar / Berger / ICI paints / Nerolac / Johnson & Nicolson Paints Ltd.

M/L for Aluminium paint ( double coat) for steel tubular pole on surfaces of any description over 10 cm. in width or girth, not otherwise described. Make- Asian / Shalimar / Berger / ICI paints / Nerolac / Johnson & Nicolson Paints Ltd. NOTE:-An interval of 24 hrs to be maintained between each coat & for second coat only be executed after inspection of WIC/EIC.

M/L for synthetic enamel ( ordinary tint double coat for steel tubular HT pole electric panel & concretre pole surface of any description over 10cm in width or girth not otherwise described Make- Asian / Shalimar / Berger / ICI paints / Nerolac / Johnson & Nicolson Paints Ltd.

M/L for writing letter or figure of 8 cm height (Block Roman, Italic, or Indian) n.exc. 30 cm heigh.Make- Asian / Shalimar / Berger / ICI paints / Nerolac / Johnson & Nicolson Paints Ltd.

S&F framed work as in doors,gates of angle or other section with gusset plates,rails,braces, etc, complete or other covering doors etc or frame work for welded wire mesh, trench cover, etc. Fe410-W(Grade.E-250) Quality-A

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay) heavy for large gates; hook and pintle hinges large haspss and staples chains hand made sliding bolts; clamps hold fasts; wall ties hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps plate washers and similar small articles conforming to FE-290 Gde-E-165.

S&F mild Steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed bolts ends; each screwed end to be fitted with washers and one hexagonal or square nut. Diameter of neck in mm Exc 12mm n. exc. 20mm

Excavation in trenches in soft / loose soil n. exc. 1.5 , in width and n.exc. 1.5m in depth and getting out.

Returning filling including spreading leveling watering and well raming in layers n. exc. 25 cm. Hard/dense soil.

M & L for cement concrete in foundation filling and mass concrete type C2 1:3:6 ( 40 mm grade aggregate )

Supply & fixing galvanised steel tubes, medium grade of bore of tube 40 mm , with all fittings and fixed complete to walls Make:- Tata/Jindal/Bhusan

Supply & fixing galvanised steel tubes, medium grade of bore of tube 15 mm, with all fittings and fixed complete to walls Make:- Tata/Jindal/Bhusan

M&L for earthing in replacement complete with GI plate electrodes 600x600x6.3mm thick buried directly in ground earth pit not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m below ground level connected to G I wire 4 mm as earthing lead fixed by means of nut bolt washer of brass as shown in electrical plate No.3 of SSR Pt-I 2009 including necessary excavation and earth work in any strata, GI pipe 20mm dia light grade for watering , and 15 mm light grade as protrection to earth wire upto 7.5 mtr , charcoal & salt etc and PCC chamber in PCC 1:3:6 type C1 covered with 40mm thick RCC 1:2:4 type B1 using 20mm graded stone aggregate reinforced with 8mm dia MS bar @ 75mm C/C both ways cover, funnel & wire mesh including making of test point all as specified testing on complete.

Stringing of ACSR conductor to maintain the permissible sag & avoid collision to each other of conductors in a span from pole to pole and all conncected works including trouble free restoration of power supply as required & directed by EIC.

Maintenance of stay of poles by tightening as directed. Cleaning of surrounding of stay rod, removal of soil cover on it etc. and as directed.

Provision of spacer of required shape size on OH line to avoid collision to each other as directed.

M & L for Shifting of ACSR conductor from one pole to another pole on the same line of 3-phase conductor 2-neutral conductor and street light conductor etc. of pin insulator point (straight way including shifting of guarding, dismantling of existing bracket, cross arms, insulators, street light fitting, I/C & O/G cables, etc and refixing of the same including necessary required fabrication work, bracing, nut bolts, strips, incoming & outgoing connection in complete as required and restore the power supply to be normal.

M & L for Shifting of ACSR conductor from one pole to another pole on the same line of 3-phase conductor 2-neutral conductor and street light conductor etc. of pin + shackle insulator point (1-straight way + 1-diversion way) including shifting of guarding, dismantling of existing bracket, cross arms, insulators, street light fitting, I/C & O/G cable, etc and refixing of the same including necessary required fabrication, bracing, nut bolts, strips, incoming & outgoing connection in complete as required and restore the power supply to be normal.

M & L for Shifting of ACSR conductor from one pole to another pole on the same line of 3-phase conductor 2-neutral conductor and street light conductor etc. of pin + shackle insulator point (1-straight way + 2-diversion way) including dismantling of existing bracket, cross arms, insulators, street light fitting,I/C & O/G cable , etc and refixing of the same including necessary required fabrication, bracing, nut bolts, strips, incoming & outgoing connection in complete as required and restore the power supply to be normal.

M & L for Shifting of ACSR conductor from one pole to another pole on the same line of 3-phase conductor 2-neutral conductor and street light conductor etc. at shackle insulator point (end point) including shifting of guarding, dismantling of existing bracket, cross arms, insulators, street light fitting, I/C & O/G cable etc and refixing of the same including necessary required fabrication, bracing, nut bolts, strips, incoming & outgoing connection in complete as required and restore the power supply to be normal.

M & L for Shifting of ACSR conductor from one pole to another pole on the same line of 4-phase conductor 2-neutral conductor at shackle insulator point (end point) including shifting of guarding, dismantling of existing bracket, cross arms, insulators, street light fitting, I/C & O/G cable, etc and refixing of the same including necessary required fabrication, bracing, nut bolts, strips, incoming & outgoing connection in complete as required and restore the power supply to be normal.

M & L for Shifting of ACSR conductor from one pole structure to another 1-pole structure of 4-phase conductor 2-neutral conductor and street light conductor in 4-ways etc. at feeder point including shifting of guarding, dismantling of existing bracket, cross arms, insulators, street light fitting, I/C & O/G cable, etc and refixing of the same including necessary required fabrication work, bracing, nut bolts, strips, incoming & outgoing connection in complete as required .

m/s sagar electricals (BID ID -829453)

M/S- Kanhaya Electric Works (BID ID -829355)