Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.1 LAccepted-AOC 3788 SHAH GANJ GB ROAD NEW DELHI 110006 | NEW DELHI | DELHI | DELHI | 110006 | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹9.8 L+₹47,965.59 (5.15%)Rejected-Finance | L2 | Rejected-Finance NOT BEING L1 | |
| 3 | L3₹10.5 L+₹1.2 L (13.1%)Rejected-Finance 1ST FLOOR H NO 165 GALI NO 16 S B S COLONY KARAWAL NAGAR DELHI EAST DELHI DELHI 110094 | NORTH EAST DELHI | DELHI | 110094 | L3 | Rejected-Finance NOT BEING L1 | |
| 4 | L4₹12.1 L+₹2.8 L (30.3%)Rejected-Finance PLOT NO 26 1ST FLOOR PRATAP NAGAR NEAR JAIL ROAD NEW DELHI 110064 | NEW DELHI | NEW DELHI | DELHI | 110064 | L4 | Rejected-Finance NOT BEING L1 | |
| 5 | L5₹12.3 L+₹3.0 L (32.4%)Rejected-Finance | L5 | Rejected-Finance NOT BEING L1 |
| Sl No | Description | Qty | Unit | R. S. Associates L3 | Shivam Firetech Engineers L4 | M/S MG GROUP L5 | POONAM ENTERPRISES L2 | Commercial Traders L1 | M/S VERMA BUILDER L6 | innovision limited L7 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified & directed. | 250 | Sqm | 10 ₹2,500 | 10 ₹2,500 | 2 ₹500 | 12 ₹3,000 | 1.99 ₹497.5 Lowest | 20 ₹5,000 | 22 ₹5,500 |
| 2.00 | M&L for 15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and fair without using extra cement, complete all as specified & directed. | 200 | Sqm | 180 ₹36,000 | 140 ₹28,000 | 150 ₹30,000 | 150 ₹30,000 | 99.99 ₹19,998 Lowest | 250 ₹50,000 | 211 ₹42,200 |
| 3.00 | M&L for rendering 5 mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling, including finishing the surface even and fair without using extra cement complete all as specified. | 50 | Sqm | 180 ₹9,000 | 150 ₹7,500 | 150 ₹7,500 | 150 ₹7,500 | 149.99 ₹7,499.5 Lowest | 200 ₹10,000 | 184 ₹9,200 |
| 4.00 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over 1 to 2mm thick cement base wall care putty, complete all as specified and directed. | 200 | Sqm | 30 ₹6,000 | 38 ₹7,600 | 50 ₹10,000 | 25 ₹5,000 Lowest | 99.99 ₹19,998 | 55 ₹11,000 | 49 ₹9,800 |
| 5.00 | M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper over 1 to 2mm thick cement base wall care putty, complete all as specified and directed. | 50 | Sqm | 30 ₹1,500 | 42 ₹2,100 | 50 ₹2,500 | 25 ₹1,250 Lowest | 99.99 ₹4,999.5 | 60 ₹3,000 | 58 ₹2,900 |
| 6.00 | M&L for applying 1 to 2mm thick cement base wall care putty on plastered surface of walls and making the surface even & smooth for receiving distemper/ paint of any description, complete all as specified and directed. | 4,000 | Sqm | 16 ₹64,000 | 18 ₹72,000 | 30 ₹1,20,000 | 10 ₹40,000 Lowest | 13.56 ₹54,240 | 30 ₹1,20,000 | 58 ₹2,32,000 |
| 7.00 | M&L for complete removal of existing treatment from the old decorated plastered surfaces of walls, complete all as specified and directed. | 4,000 | Sqm | 3 ₹12,000 | 10 ₹40,000 | 5 ₹20,000 | 10 ₹40,000 | 2.99 ₹11,960 Lowest | 10 ₹40,000 | 22 ₹88,000 |
| 8.00 | M&L for applying two coats of oil bound distemper over one coat of prime on even & smooth surfaces of walls, complete all as specified and directed. | 4,000 | Sqm | 19 ₹76,000 | 35 ₹1,40,000 | 30 ₹1,20,000 | 20 ₹80,000 | 13.56 ₹54,240 Lowest | 30 ₹1,20,000 | 49 ₹1,96,000 |
| 9.00 | S&F stainless steel kitchen plate rack made out of stainless steel sheets 1mm thick overall size 600mm x 750mm x 250mm including complete all as specificed and directed. | 10 | Each | 2,100 ₹21,000 | 3,200 ₹32,000 | 2,200 ₹22,000 | 2,500 ₹25,000 | 2,499.99 ₹24,999.9 | 3,000 ₹30,000 | 1,291 ₹12,910 Lowest |
| 10.00 | M&L for preparation of old plastered surfaces of walls and applying two coat of oil bound distemper, complete all as specified and directed. | 12,200 | Sqm | 20 ₹2,44,000 | 28 ₹3,41,600 | 25 ₹3,05,000 | 20 ₹2,44,000 | 5.99 ₹73,078 Lowest | 30 ₹3,66,000 | 58 ₹7,07,600 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
3 Sept 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE E/M RR HOSP. DELHI CANTT-10
GE E/M RR HOSP. DELHI CANTT-10
WELCOME MAINT IN OFFICERS MD ACCN AND OTHER MISC WORKS AT AHRR UNDER GE E/M RR HOSP, DELHI CANTT-10.
2025_MES_724783_1
GE/H/T-40/2025-26
Open Tender
Civil Works
Item Rate
270 days
GE E/M RR HOSP DELHI CANTT-10
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE E/M RR HOSP. DELHI CANTT-10
₹50,000
Yes
29 Dec 2025
6 Aug 2025
5 Sept 2025
6 Aug 2025
3 Sept 2025
20 Aug 2025
Amount
Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified & directed.
M&L for 15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and fair without using extra cement, complete all as specified & directed.
M&L for rendering 5 mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling, including finishing the surface even and fair without using extra cement complete all as specified.
M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over 1 to 2mm thick cement base wall care putty, complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper over 1 to 2mm thick cement base wall care putty, complete all as specified and directed.
M&L for applying 1 to 2mm thick cement base wall care putty on plastered surface of walls and making the surface even & smooth for receiving distemper/ paint of any description, complete all as specified and directed.
M&L for complete removal of existing treatment from the old decorated plastered surfaces of walls, complete all as specified and directed.
M&L for applying two coats of oil bound distemper over one coat of prime on even & smooth surfaces of walls, complete all as specified and directed.
S&F stainless steel kitchen plate rack made out of stainless steel sheets 1mm thick overall size 600mm x 750mm x 250mm including complete all as specificed and directed.
M&L for preparation of old plastered surfaces of walls and applying two coat of oil bound distemper, complete all as specified and directed.
M&L for preparation of old plastered surfaces of ceiling and applying one coat of oil bound distemper, complete all as specified and directed.
M&L for preparation of old wooden surface of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.
M&L for preparation of old steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified & directed.
M&L 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes, complete all as specified & directed.
M&L 10 mm thick screed bed or bedding layer in cement mortar (1:4) to receive wall tiles, complete all as specified & directed.
M&L for vitrified ceramic coloured tiles 8mm to 9mm thick (square/ rectangular) polished of light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified.
M&L for vitrified ceramic coloured tiles 8mm to 9mm thick (square/ rectangular) polished of light shade, area of each tiles not exceeding 0.36 sqm, in dado/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified & directed.
M&L for coloured glazed ceramic wall tiles as in vertical surfaces of size 450 mm x 300 mm x 7 to 8 mm or 600mm x 300mm x 7 to 8mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified & directed.
S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tack or galvanised wire staples or fixed with nails and wooden beads, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified.
S&F 4 mm thick sheet glass, ordinary quality and glazing with glazing clips/oil putty in squares not exceeding 0.5sqm in each pane, complete all as specified.
S&F in repairs stainless steel curtain rod 20-22mm dia including brackets, side knobs etc, fixed to walls, complete all as specified and directed.
Taking up or down 15mm bore steel tubing and connections, complete all as specified & directed.
S&F 15 mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified.
S&F in repairs bib taps, cast copper alloy, fancy Type, with crutch or butterfly handle, chromium plated, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore, complete all as specified & directed.
S&F in repairs angle valves, cast copper alloy, fancy type, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore, complete all as specified & directed.
S&F in repairs WHB mixer without pop up waste system, long body, made of cast copper alloy, chromium plated fancy type, suitable for 15mm bore pipe, complete all as specified & directed.
S&F in repairs health faucet (ABS body) mild steel chromium plated for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position, complete in all respect as specified.
S&F in repairs brass chromium plated bottle traps 32mm bore of trap for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed including removing old trap to store, complete all as specified and directed.
S&F in repairs stainless steel glossy finish grating of square shape of size 150mmx150mm with hinge type openable jali of 100mm dia size with and including fixing with cement mortar to floor/ nahani trap etc, complete all as specified and directed.
S&F in repairs sinks with drainage board made of stainless steel 0.8mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified & directed.
S&F brass CP wall , sink, washbasin mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified.
S&F powder coated anodised aluminium frame for windows, ventilators, grill with one or more rebates including necessary joining cleat, powder coated aluminium snap beading, screws for fixing etc. complete all as specified & directed. Note: (1) Only aluminium items to be measured. (2) Glass, wiremesh to be measured & paid separately. (3) Minimum thickness of powder coating to be 50 micron.
S&F aluminium powder coated sliding window comprising of sliding runner of three way aluminium frame section (weight not less than 0.80 Kg/RM) as per series-A, consisting of three sliding shutters made out of section (weight not less than 0.55 Kg/RM) with 5.5mm thick glass and wiremesh (two No sliding glass shutters and 1 No wire mesh shutter) fixed with rubber and aluminium beading including down push type locking arrangement in shutter, fixed the frame with rawl plug complete all as specified and directed.(Note:- min thickness of powder coating not less than 50 micron.)
Taking down chowkats or frames not exc. 1.5 sq. m with shutters (without taking off shutters from the frames) , complete all as specified and directed.
Taking down chowkats or frames exc. 1.5 sq. m but not exc 4 sqm each with shutters (without taking off shutters from the frames) , complete all as specified and directed.
POONAM ENTERPRISES (BID ID -3407159)
R. S. Associates (BID ID -3413681)
Shivam Firetech Engineers (BID ID -3405147)
M/S MG GROUP (BID ID -3407020)
M/S VERMA BUILDER (BID ID -3414650)
innovision limited (BID ID -3401124)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .