ADDN/ALTN TO CERTAIN SMQs ACCN AND CERTAIN MINOR WORKS AT AFS YELAHANKA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surface of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc and brushing neat cement slurry with 3kg of cement per sqm

M & L Non skid coloured ceramic tiles 7 to 8 mm thick matt finish (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including screed bed 15 mm thick in CM 1:4 complete all as specified and directed.

M&L Glazed coloured Ceramic tiles of size 450X300X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dado over and including 10 mm thick screed bed in CM 1:4 finished in toilets and kitchen all as specified and directed.

M&L Non skid coloured Ceramic tiles 7 to 8 mm thick and area of each tiles exceeding 0.18 sqm but not exceeding 0.38 Sqm as in flooring over 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L Non skid coloured Ceramic tiles 7 to 8 mm thick and area of each tiles exceeding 0.18 sqm but not exceeding 0.38 Sqm as in skirting over and including 10mm thick rendering in CM 1:4 all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed all as specified.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admixture of pigment to match with shade of granite all as specified and directed.

Rounding to edges of granite slab such as cooking platform all as specified and directed.

Demolition of cement concrete in ground floor and pavings n. exc 15cm thickness (below or above ground level) all as directed.

M&L 75 mm thick plain cement concrete type B-2,1:2:4 (using 40 mm graded stone aggregate) for plinth protection all as specified and directed.

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound, Grade ‘B’ all as specified and directed.

S&F mild steel work in tubular trusses including special shaped washer etc complete or butt welded tubes conforming to IS-1161-1979 graded St-240 all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

Taking down cement plaster from brick or stone work including raking out joints, hacking for key, scrubbing down with water, etc. walls of any description all as directed.

Demolition of brick work or stone masonry built in CM including all quions all as directed.

M&L for brick work with sub class 'B' bricks of old size, straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls all as specified and directed.

M&L 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on external wall all as specified and directed.

M&L 5mm thick cement plaster in CM 1:3 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on Ceiling surface all as specified and directed.

M&L for Keyed pointing in Cement mortar 1:4 to random or polygonal rubble all as specified and directed.

M&L for preparing the new surfaces of wall and applying two coat of oil bond distemper over a coat of primer including interior wall care putty 3mm thick all as specified and directed

M&L for preparing the new surfaces of Ceiling and applying two coat of oil bond distemper over a coat of primer including interior wall care putty 3mm thick all as specified and as directed.

Preparation of newly plastered surfaces and applying two coats of cement base paint on walls including priming with alkali resistant priming paint etc complete all as specified and directed.

M&L for complete removal of existing surface finish on walls and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manfacturer of required shade and colour complete as specified.

M&L preparation of old wall surface and applying two coat of White wash all as specified and directed.

M&L for Complete removal of existing surface finish and applying two coat of OBD in ceiling over a coat of primer complete all as specified and directed

M&L Preparing old painted wooden Surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of Synthetic enamel Paint all as specified and directed.

M&L Preparing old painted steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of Synthetic enamel all as specified and directed.

M&L for Two coat of exterior paint to old decorated surfaces of wall, floor, interlocking & chequered tile or including preparation of surfaces complete all as specified and directed.

Taking up or down 15mm steel tubing and connections all as specified and directed.

S&F 20 mm dia of CPVC pipes SDR 11 with fittings on walls / ceiling or laying in floors complete all as specified and directed.

Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or removal to store all as specified and directed..

S&F CPVC pipes 25 mm dia SDR 11 & Plain CPVC SDR 11 on walls, ceiling or laying in floors including fitting complete all as specified and directed.

S&F in repair 20 mm bore gun metal globe gate valve all as specified and directed.

S&F in repair 25 mm bore gun metal globe gate valve all as specified and directed.

S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of cement concrete complete all as specified & directed. Make : CERA / Parryware / Jaquar.

S&F in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern including all fittings and flushing pipe complete all as specified and as directed. Make : B1010108 of make "CERA or equivalent equivalent in Parryware and Jaquar.

S&F in repairs vitreous china wash basin, white or coloured of size 550 x 400 mm with padestal including brackets and fixing of pillar tap all as specified and directed . Make : S2040165 of make "CERA or equivalent in Parryware and Jaquar.

Supply only Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” with long screwed shanks fly nuts ,screwed for iron pipe and fixed completed all as specified. Make : FLR-CHR-5167NB of make "JAQUAR" or equivalent in Kohler/ CERA.

S&F in repair Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified and directed. Make : FVR-CHR-29037 of Make "JAQUAR" or equivalent in Kohler/ CERA

S&F in repair Brass CP wall Mixer for hot and cold water screwed down for iron pipe and fixed for 15 mm dia complete all as specified and directed. Make : QQT-CHR-7267SHK of make "JAQUAR" or equivalent in Kohler/ CERA.

S&F in repair Brass chromium plated bottle traps 32 mm dia for wash basins and urinal with inlet and outlet screwed for pipe or connections including necessary packing, union and cap fixed complete all as specified and directed.

Supply and fix PVC Cabinet mirror of size 600x450x125mm all as specified and directed. Make: Hindware/cera/jaquar

S&F 15mm dia angle valves, cast copper alloy, CP, screwed down, high pre-ssure, with crutch, screwed both ends for iron pipe or for unions and fixed in repair. Make : ARI-CHR-39053 of make "JAQUAR" or equivalent in Kohler/ CERA.

S&F sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. (Make : Nirali/ Blue star/ Diamond)

S&F 15mm bore sink cock fancy type complete all as specified and (table mounted) with 215 mm swivel spout complete all as specified and as directed. Make - FLR-CHR-5347N of make "JAQUAR" or equivalent in Kohler/ CERA.

S & F in repair Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore all as specified and directed at site. Make : OHS-CHR-1719 of make "JAQUAR" or equivalent in Kohler/CERA.

S & F in repairs CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange all as specified and directed. Make : SHA-CHR-483 of make "JAQUAR" or equivalent in Kohler/ CERA.

S&F in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and directed.

S&F of 32/40mm waste pipe for wash hand basin and sink all as specified and directed

S&F in repair CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats complete all as specified and directed. Make : AKP-CHR-35711PS of make "JAQUAR" or equivalent in ESS ESS/Crown.

S & F corner glass shelf with assembly of CP and fixed with Chromium plated brass screws and wooden/plastic cleats, all as specified and directed. Make : Cera/Jaguar/Ess Ess.

S & F Liquid soap container of CP fixed with and including chromium plated brass screws and wooden / plastic cleats, as specified and as directed. Make : CAN-CHR-1137N of make "JAQUAR" or equivalent in CERA/ ESS ESS.

S & F CP Towel ring fixed with Chromium plated brass screws and wooden/ plastic cleats, all as specified and directed. Make : ACN-CHR-1121BN of make "JAQUAR" or equivalent in CERA/ ESS ESS.

S&F stainless steel Soap dish fix to wall all as specified and directed. Make : ACN-CHR-1131N of make "JAQUAR" or equivalent in CERA/ ESS ESS.

S&F glass shelf of size 12 cm wide x 60cm long for wash hand basin of all as specified and directed. Make : Cera/Jaguar/Ess Ess

S&F Stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr all as specified and directed. Make :NIRALI,Blue star,Nilkhant

S&F PVC floor trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) (using 20mm graded stone aggregate) Make :- supreme or equivalent in Finolex/ Prince.

S&F PVC(SWR) Pipe 110mm dia single soketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed. Make:- Supreme or equivalent in Finolex/Prince.

S & F PVC (SWR) bends 110 mm dia in any radius with access door etc all as specified and directed.

S&F PVC (SWR) pipes 75 mm single socketed with in any length with rubber ring joints, laid in trenches or in floors and walls.Make :- supreme or equivalent in Finolex/ Prince.

S & F PVC (SWR) bends 75 mm dia in any radius with access door etc. all as specified and directed. Make :- supreme or equivalent in Finolex/ Prince.

S & F PVC (SWR) 75mm dia junction (single 'T') equal or unequal with access door etc all as specified and directed. Make: supreme or equivalent in Finolex/Prince.

S&F CP grating size 100mm fixed with white cement all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tank 1000 ltr capacity hoisted and thread type cover fixed in position all as specified in SSR Pt - I including dismantling old tank complete all as specified and directed.

S&F in repair 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass in repair (Minimum weight 25mm-455gms) all as specified and directed. Make :- supreme or equivalent in Prayag/Polytuf.

S&F in repair PTMT Nipple 25 mm suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) all as specified and directed. Make :- supreme or equivalent in Prayag/Polytuf.

S&F in repair PTMT Nipple 20 mm suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms)all as specified and directed. Make :- supreme or equivalent in Prayag/Polytuf.

Taking down door chowkats or frames not exceeding 1.5 sqm each with shutters (without taking off shutters from the frame) of any description all as directed.

All as per item No71 above but exceeding 1.5 sqm but not exceeding 4 sqm each all as directed.

M&L for taking down shuttes of any description exc 1 Sqm and n.exc 2 Sqm each, cupboard shutters all as specified and directed.

M&L for taking down shuttes of any description exc 2 sqm each and refixing in the same opening all as specified and directed.

Cutting holes in brick walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 0) (using 12.5 mm graded stone aggregate) depth of embedded portion of hold fast not exceeding half brick complete all as specified and directed.

Providing of UPVC (Unplastisized Poly-Vinyl Chloride) sliding windows multichambered and stiffened / reinforced framed windows using 112 mm x 52 mm x 2.3mm (±0.2mm) size sections alround as main frames and shutters made with the profile sections of size 68 mm x 42 mm, including the cost and fixing of 5 mm thick clear float glass in shutters and SS Mesh in mesh Shutters of Size 60 mm x 35 mm with neccessary beading, the corners of all the profiles of frames and shutters shall be homogeneously fusion heat welded without any gaps. The shutters shall have necessary handles, beadings and other associated fittings to facilitate smooth operation. Both the Frame and the Shutters shall be Reinforced with GI Profiles of thickness 1.25mm. Fixing the window unit to the existing masonry with anchor fasteners as required. The gaps between the window frames and masonry walls shall be filled with silicon(Dowsil) or with any other suitable filler materials by the installation team at site complete all as specified and directed.

Providing UPVC (Unplastisized Poly-Vinyl Chloride ) Fixed Louvered multichambered and stiffened / reinforced framed windows using 50mm x 50 mm x 2.3mm (±0.2mm) size sections alround as main frames with necessary Mullion sections of sizes 68mm x 50mm as sash bars (If Required) including the cost and fixing of 5mm thick Pinhead Glass in suitable PVC Louver Clips Fixed to GI Channels (Powdercoated finish), the corners of all the profiles of frames shall be homogeneously fusion heat welded without any gap. Frame shall be Reinforced with GI Profiles of thickness 1.25mm. Fixing the window unit to the existing masonry with anchor fasteners as required. The gaps between the widnow frames and masonry walls shall be filled with silicon(Dowsil) or with any other suitable filler materials by the installation team at site complete all as specified and directed.

Supply & fixing factory made WPC door frame 100% Solid (wood polymer composite) Size 100mm x 65 mm Single Rebated ,made from wpc material comparising of virign PVC polymer of K value 58-60 (suspension grade ) calcium corbonate and natural fibers ( wood powder/rice husk /wheat husk) minimum compressive strength of 58 N/mm2, moduus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasterns / hold fast of required dia and length,colour of door frame to match that of shutter complete all as specified and directed. MAKE:- BLACK COBRA/ SMP Impex or equivalent.

Supply & fixing factory made WPC door frame 100% Solid (wood polymer composite) Size 125mm x 65 mm Single Rebated ,made from wpc material comparising of virign PVC polymer of K value 58-60 (suspension grade ) calcium corbonate and natural fibers ( wood powder/rice husk /wheat husk) minimum compressive strength of 58 N/mm2, moduus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasterns / hold fast of required dia and length,colour of door frame to match that of shutter complete all as specified and directed. MAKE:- BLACK COBRA/ SMP Impex or equivalent.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction. MAKE:- BLACK COBRA/ SMP Impex or equivalent. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

M&L 35mm thick Factory made solid WPC (Wood plastic composit) WIRE MESH door shutter with S.S wire mesh in any number of division with brown wood grain texture, cluding s. wire mesh shall be fixed with 15x15 square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be 650 or as per manufacture instruction complete all as specified and complete all as specified and directed. MAKE:- BLACK COBRA/ SMP Impex or equivalent. Note. Material test certificate and authentication should be compulsory provided by the manufacturing company.

S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 all as specified and directed.

S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets , cast or extruded section and fixing bolt and sliding bolts of extruded section all as specified and directed.

S&F for aluminium anodised, barrel tower bolt 150mm long of extruded section all as specified and directed.

S&F for aluminium handle of size 150mm cast type anodised all as specified and directed.

S&F floor door stopper 150mm (overall length of cover plate) of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor cover plate all as specified and directed.

S&F Brass 300 mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.

S & F mild steeel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165. all as specified and directed.

M&L Preparation of new steel surfaces of any description over 10cm width or grith and applying two coat of Synthetic enamel Paint over one coat of red oxide primer to steel surface complete all as specified and directed.

S& F for aluminium powder coated drapery rod 32mm dia shall have two fillets at both ends all as specified and directed.

S& F aluminium powder coated fancy type suitablre brackets fixed at both ends of openings fixed over 1st class hard wood rounded wooden blocks of 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws including necesary drilling & finished with polishing Each opening shall have two fillets at both ends all as specified and directed.

M&L for Factory made WPC Single extruded board of 18mm thick pre laminated shutter for kitchen cabinets, Cupboard, and the pre laminated side with different density and other side plain with of density not less than 600kg/ cum. the 18mm board should be 100% lead free water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified.cupboard cabinet and including Necessary fittings like Hinges, handle and hanging rod and locking arrenement etc all as specified and directed. Make :Sintex, black cobra, SMP Impex.

S&F Stainless steel telescopic Bascket for kichen cabinets of size 48 cm x 50 cm x 10 cm all as specified and directed.

S&F Stainless steel telescopic Bascket for kichen cabinets of size 48 cm x 50 cm x 15 cm all as specified and directed.

S&F Stainless steel telescopic Bascket for kichen cabinets of size 48 cm x 50 cm x 20cm all as specified and directed.

S&F polished Sadarahalli granite slab flooring 20 to 22 mm thick with grey cement slurry mixed with pigment to match the shade of the slab with nosing and two lining at the edges including 20mm thick screed bed in cement mortar 1:4 complete on staicase all as specified and directed.

Supply and fix 20 to 22mm thick polished sadarahalli granite tiles as in riser and dado of steps over and including 10mm thick cement mortar 1:4 complete all as specified and as directed.

Demolition of plain cement Concrete in sunken floors exc 15cm thick (above ground level) and disposing the rubbish to a distance exceeding 50 m but not exceeding 100 m away to low lying areas complete all as specified and directed

Taking down eaves gutters and rain water pipes (any size or pattern) , including all fittings, heads, shoes, bends, swan necks, etc all as directed.

M&L for Hardcore of gauge n exc. 63 mm broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 25 mm thick plain cement concrete type B-0, 1:2:4 (using 12.50 mm graded stone aggregate) as in sub base of fooring complete all as specified and directed.

M & L for 10mm thick water proofing plastering in cement mortar 1:4 rendering is to be finished even and fair without using extra cement all as specified and directed.

Applying three coats of brush bond acrylic based cementitious material of approved quality (Dr. Fixit- Pidifin 2K or Brushbond RFX of Fosroc India (P) Ltd. or equivalent) for sunken portion treatment and chajja poryion all as per manufacturer instruction and providing 150micron thick polythene film over bitumen primer @ 0.5 kg /Sqm all as specified and directed.

M&L for plain cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregates) as in sunken floor, filling and mass concrete complete all as specified and directed.

S&F for Low density polyethyene pipes (LDPE) 50mm bore pipe of rating 6 kg / sqcm as in spout complete all as specified and directed. Make :- Supreme / Finolex/ Prince.

Taking down unserviceable wire carefully copper/ aluminum point wiring (light, fan,bell, socket or power) complete including fittings such as switches, ceiling roses, regulators, sockets, light fittings, fans etc., and making good the disturbed surfaces of walls, ceiling etc., including painting with same colour of the background, complete all as specified and directed.

M&L for point wiring complete with 1.5 Sqmm (nominal cross sectional area) single core PVC insulated heavy duty ISI marked unsheathed cable 1100 volts grade with multistranded copper conductor drawn through in and including new PVC concaled conduit in existing brick /stone wall for concealing conduit and provision of PVC insulated heavy duty ISI marked unsheathed copper conductor ,1.5 sqmm for earth continuity conductor and connected to common earth dolly for the following. Note: Cutting chases, pinning in, making good etc for concealed wiring is deemed to be included in the quoted rate.

(a) One Light point controlled by one switch

(b) One fan point controlled by one switch.

(c) One Exhaust fan point controlled by one switch.

(d) One 5 Amps socket point on same board with other switches

(e) One call bell point controlled by one bell push

All as per item No 110 above but wiring complete with 2.5 Sqmm for 5 pin 5/15A socket multipurpose on independent board all as specified and directed.

S & F in repair Modular Switch 1 way 6 Amps 1 Module all as specified and directed.

S & F in repair Modular Socket,6 Amps- 2/3 pin combined 2 Module all as specified and directed.

S & F in repair Modular Switch 1 way 16 Amps 1 Module all as specified and directed.

S & F in repair Modular Socket,6 A/16A,2 Module all as specified and directed.

S & Fin repair Modular bell push 6A,1 Module all as specified and directed.

S & F in repair Modular type Fan step regulator 120W type 2 module all as specified and directed.

S & F in repair PVC ceiling rose two to three terminals all as specified and directed.

S & F in repair ding dong bell AC, 230 volts, single pole complete all as specified and directed.

S&F in repairs LED Tube light fitting 1 x20 W, 4 feet ,220V housing with PC diffuser box type with driver,holder including LED tube light connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal all as specified and as directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete as specified and directed.

Supply and Fixing in repairs MCB DB SPN 8 way, Double door, 240 V, AC, 50 Hz, with 200Amp rated bus bar including dismantling existing one all as specified and directed.

Supply and fixing in repair 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning including dismantling existing one all as specified and directed.

Supply and fixing in repair 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and neutral current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning including dismantling existing one all as specified and directed.

Taking down existing ceiling fan of any size , M & L Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. Including writing MES No, Complete all as specified and directed.

Hanging Only Ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan all as specified ,and any addn/alteration /threading if required to down rod shall be done by contractor with out any extra cost Complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers etc all as specified and directed

M&L for making suitable size Core cutting on stone/Bricks wall for fixing of exhaust fan 300 mm sweep and making good to the distrubed surface all as specified and directed.

S&F white cover plate with frame 1 module all as specified and directed.

S&F white cover plate with frame 2 module all as specified and directed.

S&F white cover plate with frame 3 module all as specified and directed.

S&F white cover plate with frame 4 module all as specified and directed.

S&F white cover plate with frame 8 module all as specified and directed.

S&F modular metal flush box 1/2 module all as specified and directed.

S&F modular metal flush box 3 module all as specified and directed.

S&F modular metal flush box 4 module all as specified and directed.

S&F modular metal flush box 8 module all as specified and directed.

Roughening surface of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc complete all as directed.

S&F 4.50mm thick linoleum, plain coloured, laid dry in floors including stretching cutting and fittng and sealed down with an approved adhesive complete all as specified and directed.

M&L for provision of Metallic Railing for Ground Run in following stages:- (a) M&L for cutting into existing pavement quality concrete (PQC) by dimond cutter, removed the demolished material outside of MOD land and clean the existing surface to avoid FOD. (b) Fixing medium channel ISMC-75 and applying two coats of enamel paint over a coat of red oxide. (c) Making good with epoxy filling between side of channel and existing pavement to even and smooth complete all as directed.

JITHU CONSTRUCTION COMPANY (BID ID -3141219)

EURO ENTERPRISES (BID ID -3141193)

M/s BHOOMI ELECTRICALS (BID ID -3141180)

G K CONSTRUCTIONS (BID ID -3141390)

Raghu M Contractor (BID ID -3148113)

MSA Constructions (BID ID -3147589)