Loading
Loading…
Loading…
Tender Value
₹7.4 Cr
EMD Value
₹14.8 L
Closing Date
5 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
(PH-31)
ENGG
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V which ever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.
Defination of Similar Work :- Any Civil Engineering Work excluding zonal works.
21 conditions · 8 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The original BG (in lieu of Bid Security) should be delivered in person or through post/courier so as to reach the official nominated (i.e.OS/Tenders/Engg/HYB Division) within before closing date for submission of bids.(i.e., excluding the last date of submission of Bids). Railway will not assume any responsibility for any delay in case the BG is sent through courier/postal department. Any BG received by post/courier on or after the closing date of bid submission shall not be taken.
AII the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General instructions / Undertakings are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
Tender value is including escalation of (-)15% (minus Fifteen percent) on CPWD DSR rates. Tenderer should note this before quoting the rates
A) HYB DIVISION - Proposed Side drains in cutting locations under ADEN/MED section (Total Length -1800RM) (11.03.31.25.4.52.003) (LOCATION DETAILS GIVEN) B) HYB DIVISION - Proposed Side drains in cutting locations under ADEN/NZB section (Total Length -1800RM) (11.03.31.25.4.52.004) (LOCATION DETAILS GIVEN) C) HYB DIVISION - Standardization of cutting in Sr.DEN/North/HYB section (11.03.31.25.4.52.005) (LOCATION DETAILS GIVEN)
58_DRM_W_HYB_26
58_DRM_W_HYB_26
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹14.8 L
5 Jun 2026
12 May 2026
22 May 2026
48 items across 4 schedules · ₹8,42,45,250.5 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| embankment, guide abutments, bridge platforms etc. with conforming to Soil after preparation of benching in existing spreading in layers the moisture content compaction to specified bank to final profile as RDSO/2020/GE: IRS- slips. Note: 1) Benching including account of this, be paid extra under benching. 2) Payment item shall be made section measurements ground profile of initial ground levels (ii) final profile of the final levels as per | — | — | — | — | |
| 1 | Using Soil Class SQ2 | cum | 450.00 | 268.5 | 1,20,825 |
| formation, trolley crossing approaches, diversion of nallah dimension and slopes to to standard profile materials, plant & spoils either to make in embankment with side of edge of the lifts, ascent, descent, & pumping out water, and all other works completing the work as RDSO/2020/GE: IRS- correction slips and to Engineer-in-Charge. Note: from cut spoils shall and Unusable spoils away from toe of rock /and boulders not by the contractor the Railways. (iii)Cut Railways and to be godown unless specified of Contract. | — | — | — | — | |
| 2 | classifications of soil except | cum | 95000.00 | 104.1 | 98,89,500 |
| 3 | Soft rock not requiring blasting | cum | 9500.00 | 240.17 | 22,81,615 |
| 4 | In hard rock requiring blasting | cum | 450.00 | 344 | 1,54,800 |
| along running track in close vicinity of execution of work and of the work as per Fencing shall consist angles of size 50mm x provided with hooks 1:2:4 block of size placed at c/c distance dia rods in three tack welded with angle material will be property completion of work. Cost blocks shall be paid | — | — | — | — | |
| 5 | 50mm wide retro- direction, duly posts. | Metre | 11700.00 | 201.84 | 23,61,528 |
| 6 | by making suitable Brick Masonry / abutment, wing mm dia UPVC pipe extending through structure complete and cement mortar 1:2 (1 Rate is excluding the be paid extra. | Metre | 1260.00 | 402.61 | 5,07,288.6 |
| minor miscellaneous duration including and consumable. arrange all statutory rules and regulations work. Payment shall be hours at site. | — | — | — | — | |
| 7 | Plus or similar with capacity | Hour | 416.00 | 870.14 | 3,61,978.24 |
| Schedule total | ₹1,56,77,534.84 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
26.02.2026_RevisedApprovedlistofBrandsandMakes2026withallenclosures.pdf Approved brand
ATTACHMENT
concretemixdesignsystemimprovements.pdf
ATTACHMENT
SpecialConditionsforPaymentofSteel_1.pdf
ATTACHMENT
LaboratorySplconditionslatest.pdf
ATTACHMENT
Tenderdocument24.09.2024_1.pdf
ATTACHMENT
ContractorseMBrecord.pdf
ATTACHMENT
GCC2022_compressed.pdf
ATTACHMENT
CONDITIONS-DRAIN.pdf
ATTACHMENT
26.02.2026_RevisedApprovedlistofBrandsandMakes2026withallenclosures.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .