BARCT/NRB/GSO/EMT182/2025/63

Amount

Supply, Installation, Testing, Commisioning and Gurantee of Street Light Poles with LED Fittings :

Street light Pole 8 Mtr Height (with Lighting Fixture) : SITC and guarantee of GI Octagonal shape Street Light Poles 8.0 meter in Height made out of 3.0 mm thick, Bottom dia.-155mm, Top dia.-70 mm single sheet along with SITC of single arm bracket and 90 Watt LED street light fixture and other required accessories. The pole should be fitted on the basement and shall be easily removable type.The pole should be pre-wired with 1.5 Sq.mm, 3 core, flexible copper conductor PVC insulated cable, 6 Amp Single pole MCB for lighting fixture RCC foundation for the pole should be done by doing excavation of trench of suitable size, concreting for foundation of size 1800mm x 450mm x 450mm for pole with 1:2:4 mixture of concrete with steel reinforcement. SITC of Base plate of pole shall be of dimension 250x 250 x 16mm thick. The pole should be earthed with 2nos. 05 meter each 8 SWG copper wire. Detailed specification is mentioned in technical specification attached with schedule-A. Total length of the Road from main road upto TCM project is 500 Mtr. Length between poles is 30 Mtr. hence total no. of Poles is 16. Spare requirement - 4 nos. so Total 20 Poles. After Installation Pole should be painted with Silver colour. All the work to shall be carried out as directed by EIC and all material shall be get approved from EIC before installation.

Supply, Installation, Testing, Commisioning and Gurantee of Lighting Poles (without Lighting Fixture): Street light Pole 7 Mtr Height : Fabrication, Supply, Installation, Testing, Commissioning of GI Octagonal shape Lighting Poles as follows : Total height of the pole is 07 Mtr from basement and the pole should be of octagonal shape made of single sheet by folding the sheet in octagonal shape of 3 mm thick, Bottom dia.-130 mm, Top dia.-70 mm, thickness of Galvanising should be 80 Micron for pole and 110 Micron for base plate. The termination box should be of concealed type for termination. The pole should be pre-wired with 1.5 Sq.mm, 3 core, flexible copper conductor PVC insulated cable with one no 6 Amp Single pole MCB for each lighting fixture. The pole should have Ring type/ISM bracket suitable to mount 2 Nos (opposite side) LED Flood Lights of 100 Watt. The hot dip galvanized pole should be fitted on the basement and the pole should be easily removable type. Foundation for the pole should be done by doing excavation of trench of suitable size, RCC for foundation of size 1800mm x 450mm x 450mm for pole with 1:2:4 mixture of concrete. Base plate of pole should be of dimension 200x 200 x 16 mm thick. The pole should be earthed with 2 Nos. 8 SWG copper wire each of 5 mtr. length. Other detailed specification are given in Annexure. Total length of the Road from New type-C qurter to ST Plant is 1600 Mtr. Length between poles is 40 Mtr. hence no. of Poles is 40. Spare requirement - 5 nos. So total poles are 45 Nos. All the work to shall be carried out as directed by EIC and all material shall be get approved from EIC before installation.

LED Flood Light : SITC and Guarantee of 100 watt LED Flood light, with control gear, secondary optics lenses and housing made out of pressure die casting with heat sink and aluminium extrusion with IP-66. Material shall be got approved from EIC before installation.

Supply, Installation,Testing, Commisioning and Gurantee of LT POWER CABLE:

Excavation : Excavation in all types of soils at a depth of 900 mm for installation of LT cables including back filling and leveling, dressing the sides. Depth of the trench should be considered from the normal ground level. Removal or disposal of excess earth within distance of 100 M. Refilled soils should be brought to the normal level by pouring the water in the trenches where ever necessary and as directed by EIC. 1600+500=2100*0.9*0.5 = 945 Cu.Mtr.

Supply of LT Cable : 4 core X 16 sq. mm.,1.1 KV Power Cable Stranded Aluminum conductor, XLPE insulated, PVC "ST-2" inner sheathed (extruded) Galvanised Steel Round wire Armoured and overall PVC "ST-2" extruded sheathed as per IS 7098 and as per specification given in the tender. The total length of the cable should be marked with / have embossing of size, voltage grade, make and length on every one meter length of the cable. The cable should be supplied in a non returnable steel drum in one length the full quantity. Total length = 1600+500=2100 + 500( spare for loop and end termination ) =2600 Mtr

Laying of LT cable : Laying of LT cable 1.1 KV grade XLPE insulated, Aluminum conductor at a depth of 900 mm below the ground level, covering the same with sand and baked bricks at both sides of the cable and top, as directed by Engineer-in-Charge 4 core * 16sq.mm, 1.1 KV grade, Al.cond., XLPE cable.

End termination of LT cable: Supply and making end termination of 4 C x 16 sq.mm , Aluminum Conductor, XLPE insulated, PVC sheathed (extruded) G.I. round wire armoured 1.1. KV grade cable with Heavy duty Cable gland and heavy duty long barrel copper lugs. Crimping should be done with hydraulic machine only. work should be done as directed by EIC. After end termination testing and commissioning of LT cable as per specification.

Supply and Guarantee of 3core, 2.5 sq. mm., 1.1 KV grade, Copper conductor, XLPE insulated, PVC "ST-2" inner sheathed (extruded) Galvanised Steel Round wire Armoured and overall PVC "ST-2" extruded sheathed as per IS 7098 and as per specification given in the tender for CC TV work.

DIESEL GENERATOR SETS Supply, installation, testing, commissioning and guarrantee of 160 KVA/128Kw, 415V, 50 Hz Diesel Generator set Complete with sound proof Acoustic Enclosure complying with CPCB IV noise limits and all accessories like engine, alternator, batteries with leads, automatically sensing control panel, base frame, antivibration mounts, Hospital / residential silencer, fuel tank, intake & exhaust piping, motor operated fuel oil pump,announciation, other miscellaneous acessories for the total set including test trial run for 3 hours at full load (inclusive of consumable oil etc) etc as per technical specification in Annexure - I . Foundation for installation of DG Set and civil work required if any is in scope of the contractor.

EARTHING Providing, Installation and Testing of Earth Station as per IS 3034 Copper Plate Earthing, having Tined copper plate of size 600x600x3 mm, depth of Earthing is 2.8 Mtrs, tined copper strips of size 40x6 mm, 40 mm GI pipe for watering, cast iron cover, charcoal, salt, funneling arrangements with necessary masonry work for earth chamber etc for above DG set. Details as per enclosed technical specifications.

Earth Cooper Strip : Supply and installation of 25 mm x 3 mm size electrolyte grade tinned solid copper earthing conductor strip & accessories. Material shall be got approved from EIC before installation andl the work to shall be carried out as directed by EIC. .

Power Cables: 3.5 x 240 sq mm Supplying and installation of 3.5 x 240 Sqmm XLPE insulated, Aluminium conductor armoured cable 1100 V grade including Excavation & Laying. Material shall be got approved from EIC before installation and the work to shall be carried out as directed by EIC.

Supplying and making of end termination of 3.5 x 240 Sqmm XLPE insulated, Aluminium conductor armoured cable 1100 V grade including brass cable gland, Copper lug and acessories. Material shall be got approved from EIC before installation and the work to shall be carried out as directed by EIC.

SARASWAT ENGINEERING SERVICES (BID ID -3181160)

Ramesh Electrical and Mechanical Works (BID ID -3180556)