SPL REPAIR OF PRINCIPALS ACCN AT KVS INCL PROVN OF TOILET BLOCKS FOR NCOS OR LINE AND CWE 2 COMPLEX PROVN UTENSIL RACKS IN PBOR GOVT MD ACCN MAP SAFILGUDA AND ADDN ALTN TO ROOF AND FALSE CEILING OF UNIT 289 UNDER GE SOUTH SECUNDERABAD

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm dep and getting out in soft/loose soil

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard / dense soil complete all as specified and as directed by Engineer in Charge

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation etc or for manholes / Septic Tank/Sockage well etc area n.exc. 10 Sq.m on plan and n.exc 1.5m in depth getting out in hard/dense soil. all as specified and directed.

Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers n.exc. 25cm thick all as specified and directed..

Spreading & Levelling and well ramming including watering as required in layers n.exc 25 cm thick

M & L for sand filling under floors or in foundations including watering and consolidation

Removing excavated materials in exc 50 Mtrs an deposited where at a level n. exc 50 mtr where directed n exc 1.50m above the starting point all as specified and directed

Hard core of gauge not exceeding 63mm of broken briicks, deposited, spread and levelled in layer n.exc 15cm thick, watered and well rammed to a true surface all specified

M&L for sand cushion/bed for laying interlocking tiles / paver blocks complete all as specified.

M&L PCC 1:4:8, type D2, using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete. all as specified and directed .

M & L providing cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in copings, roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in copings around thepaver block for setting etc including weathering, slightly rounded or chamfered angles and throating and including necessary form work complete all as specified and as directed.

M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) in landings, cover slabs (for manhole etc) including necessary form work and set in CM (1:4). all as specified and directed. Note:- Reinforcement shall be measured and paid separate

M&L for precast cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate), as in man holes cover slabs etc including necessary form work and set in CM 1:6, complete all as specified and as directed. Note:- Reinforcement will be measured and paid seperately

M & L for reinforced Cement Concrete (Nominal mix) type B1 1:2:4 (using 20 mm graded granite stone aggregate) in foundations including rafts, footings and mass concrete, foundation beams, plinth beams, bases for columns, basement slabs etc.

M&L for reinforced Cement Concrete 1:2:4 20 mm graded aggregate nominal mix for slabs supported on walls, beams and columns in floors, roofs, landings balconies canopies, desk slabs and in shelves and the like

M&L for reinforced cement concrete (Nominal mix) type B1 1:2:4 (20 mm graded aggregate) in lintel bands, roof beams and cantilevers etc.

M & L for reinforced Cement Concrete (Nominal mix) type B1 1:2:4 (using 20 mm graded granite stone aggregate) in Columns, piers, posts and struts.

Supply only intigral water proofing compound

M/L brick work with sub class B bricks built in CM 1:6 straight or curved exceeding 6m mean radius all as specified.

M&L Brick work with Fly Ash bricks straight or curved on plan exc 6M mean radius built in CM 1:6 as in manhole etc.all as specified and directed.

M&L brick work with fly ash bricks built in CM 1:4 straight or curved on plan exc 6 mtr mean radius all as specified.

M & L for half brick wall with fly ash bricks straight or curved on plan to any radius built in cement mortar 1:4 complete.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

M&L for use & waste of rough finished flat Form work to sides of concrete foundations rafts, footing, base of columns, raft and raft beams, sides & soffits of foundation (if any) of foundation and plinth beams and similar work.

M&L Form work to soffits of suspended slab such as roof slab, floor slab, floor etc. n. exc 200mm thick rough fineshed surface of concrete slab (Horizental or sloping)

M&L Form work to chulla hoods, chajjas and similar item of rough finished surface of concrete incl edgs

M & L Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

M&L for formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide rough finished surfaces

Use & waste of rough finished Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions.

S&F 2nd Class Hard Wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

S & F 35mm thick 2nd class hard wood glazed skeleton shutters open rebated and prepared to receive glass and divided into square with plain, rounded, chamfered, mitred and rebated sash bars.complete all as specified & directed.

S&F for 35mm thick factory made plain framed paneled shutter of 2nd class HW (any Number of panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm th venered particle board with veneering on both face kiln seasoned & chemically treated complete all as specified & directed.

Taking down chowkat with frame (without taking off shutter from the frame) n exc 1.50 Sqm each complete all as specified & directed.

All as per item No 41 above but area exc 1.5 Sqm n.exc 4 Sqm each complete all as specified.

Taking down shutter of any description exc 1 Sqm & n exc 2 Sqm each complete all as specified complete all as specified & directed.

M & L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded oplain colour PVC 'C' channel having a PVC sheet strip of 20mm thick width stuck inside with solvent cement for style and palin colour PVC sheets for tops rail, lock rail and bottom rail,Panelling of plain color PVC sheets to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and joined together with the solvent cement, suppling and fixing in the frame at site as per specifications and drawing

S & F Aluminium anodised barrel tower bolts 150mm of extrded section complete all as specified & directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed

S & F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

S & F 100mm butt hinges medium weight cold rolled mild steel complete all as specified & directed.

S & F 100mm long Stainless steel butt hinges with galvanised aluminium pin.complete all as specified & directed.

S&F 300 mm long helical door springs including roller plate complete all as specified & directed.

S & F Aluminium handle 150mm fabricated type complete all as specified & directed.

S&F Tubular towel rail brass chromium plated, 20mm dia, D type 60cm, D type 60cm between the flangers

S& F for 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor

S&F in galvanised MS wirecloth 0.56mm nominal dia of wire and average width of aporture 1.18 and fixed with tinned tacks or galvanised wirestapples etc complete all as directed

S&F for 100 mm long extruded Aluminium alloy butt hinges fixed to PVC door shutter.

S&F 0.63 mm nominal dia of wire ; galvanised mild steel wire cloth and average width of aparture 1.40 mm and fixed with tinned tacks or galvanised wire stapple complete all as specified and directed.

M&L for framed work such as grills, gratings etc with ends of bars, framed guard bars, ladders etc and similar works conforming to FE-290, Gde E-165

S&F MS TMT bars 10 mm dia and over for reinforcement etc, cut to length, bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed.

Ditto all as above item No. 23 but 6 to 8mm dia bar

-Ditto- but 5mm dia and over upto and incl 10 mm dia in spacers, stirrups and binders

S & F roof trusses (framed) trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces cleats etc confirming to grade Fe-410 W E250 quality A.

S&F steel windows or ventilators, fixed type, with glazing bars all as specified and directed

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete.

S&F steel window with side hung shutters incl projecting type hingers with steel handles and peg stays with glazing bars, devotailed or welded completed all as specified and directed

S & F Aluminium powder coated frame work for door / windows / ventilators with one or more rebates including joining heat for fixing etc complete all as specified

S & F Aluminium powder coated door shutters, aliminium section weighting 0.55 Kg/M including necessary joinging cleats, galzing clips, ruber neoprene pakcing handles 2 Nos in each door, hinges anodised aliminium snap beading screws etc, complete all as specified

S & F prepainted galvalume aluminium zink coating GI based corrugated steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPA asin roof covering/cladding to wall fixed with self tapping screws as specified.

S&F pre painted galvalume aluminium zink coating GI based plain steel sheeting 0.5mm thick of any colour haing tensile strenghth of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws as specified

M & L cutting grooves in brick wall/roof slab of size 75mm wide 65mm deep and shapping to horizontal face of the groove with cement mortar 1:3 complete all as specified and directed.

Taking down rain water pipes of any description any pattern incl all fittings heads, shoes bends etc all as specified.

M&L for Providing and fixing Non asbestos designer E-Board 4mm thick in ceiling fixed to snap grid as per manufacturers instructions complete all as sepcified and directed by Engr-In-Charge.

S&F in repairs 19mm thick block board grade 2 quality, interior grade, commercial type on both faces fixed as in shutter/shelves of cup boards etc complete all as specified & directed.

M&L for PCC (1:3:6) type D-2 (using 40mm graded aggregates) as in sub base 75mm thick all as specified.

M7 L 75mm thePCC 1:4:8 type D-2 as in sub base , floors, paving finished even and fair complete all as specified

M & L for 25 mm average thick PCC (1:2:4) Type B0 by using 12.50 mm graded stone aggregate as in roof where required over slabs and finishing the exposed surfaces fair even without using extra cement complete all as specified and directed.

M&L for 25mm thick cement concrete type B-1,1:2:4 (20mm graded aggregate) as sub base of flooring and all as specified.

M&L for removal of old treatment of any description and removing the debris roughening the surfaces of old concrete roof surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed.

Taking down plastering on brick walls etc including racking out joints, hacking for key, scrabing down with water etc. complete all as specified and directed.

M & L 10mm thick rendering in CM 1:4 using water proofing compound at the rate of 3% weight of cement over concrete surfaces complete all as specified and directed. ( Note : WPC measured and paid separately)

Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in internal and external surfaces of man holes, septic tank, filter bed etc incl removing of debrie all as specified and directed.

M&L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n. exc. 5 Sqm Each pane complete all as specified

S & F 3mm th figured glass ordinary quality and fixed with oil putty in square not exceeding 0.50 sqm in each pane complete all as specified and directed.

M & L for preparation of wooden surface and applying 2 coats of synthetic enamel paint over one coat of pink primer over 10cm width or girth complete all as specified.

M & L for preparation of old wooden surface and applying two coats of synthetic enamel paint over 10cm width or girth complete all as specified.

Preparation of new wooden surface of any description over 10cm width orr girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

Preparation of new Steel surfaces of any description over 10cm width orr girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

S&F 15 mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified & directed

S&F 20mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified & directed

S&F 25mm bore GI tubing medium grade with all fitting and fixed to walls or laid on floor

S&F rotational moulded polythene water storage tank with closed top fixed in portion 2000 ltr capacity incl fittings

S&F rotational moulded polyethylene water storage tanks 1000 ltrs(cylindlerical vertical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantaling of existing damaged water tanks.

S&F for fancy type bib tap 15 mm bore chromium plated, cast copper alloy , screwed for iron pipe or for brass ferrule.

S&F pillars taps, cast copper alloy with capstan heads CP fancy type screwed down high pressure, with long screwleed shanks and fly nuts, screwed for iron pipe 15mm bore complete

S&F in repairs stop cock 15mm dia cast copper alloy with crutch or butterfly handle, screweddown, screwed foriron pipe or for brass ferrule and fixedin repairs complete all as specified & directed

S&F 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe as in repairs complete all as specified & directed.

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weigth 455gms) 20mm bore

S&F for stop valve/angle cock 15mm bore cast copper alloy but fancy type chromium plated with long shank and cup screwed down high pressure fixed to iron pipes or for unions.

S&F for concealed stop valve/angle cock 15mm bore cast copper alloy chromium plated and cup screwed down high pressure screwed both end for iron pipes or for unions and fixed.

S&F of ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 25mm bore pipe.

S&F PVC connection 15mm size with PTMT nuts of length 600mm

S&F PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls all as specified.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, 75mm bore

S & F for 110 MM PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors

S & F for 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors

S & F for 75 mm PVC (SWR) bends

S & F for 110 mm PVC (SWR) junction single (Single T) equal or unequal with access Door

S&F 125mm dia brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union

S & F PVC (SWR) junction single T equal or un-equal 75mm bore

S&F 110mm bore PVC (SWR) vent cowl

S&F 110mm PVC (SWR) WC connector with lip ring

S&F 110mm PVC (SWR) WC connector bend type

S&F 75mm PVC (SWR) floor trap plain with grating incl jointing with solvent cenment

S&F PVC (SWR) bends any radius 75mm bore provided with access door

Ditto-all as per item no 54 above but 110mm bore.

Materials and labour for 150mm dia salt glazed stone ware drain pipes laid over cement concrete type D 2 1:3:6 (using 40mm stone agg) for bed to 150mm dia drain pipes incl packing under and hunching against sides of pipes complete including necessary earth work as required at site all as sirected by Engnr-in-Charge

Demolition and breaking up or taking up drain pipe (salt glazed stone ware, AC or reinforced concrete ) set in cement mortar, 150 mm dia all as specified and directed.

M&L SWG drain pipe grade 'A' of 150 mm internal dia laid in trenches and jointed in cement mortar complete all as directed.

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 for 150mm dia pipe all as specified and directed.

Cutting into existing manholes for connecting new drain making good to pipe 150mm internal dia and rendering cutting out existing benching for and forming branch channel C1/2 round or 3/4 section) in cement concrete 1:2:4 type B 1 smooth finished and reforming benching

S & F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed

Demolition of brick/stone masonry work built in cement mortar including all quions, arches, pillars etc complete all as specified and directed..

Demolition of stone slabs of any description or thickness in floors, aprons, etc laid, bedded and pointed in any mortar

Demolition of cement concrete(unreinforced) in ground floors and paving nexc 15 cm thickness (below and above ground level) complete all as specified & directed.

Demolition of cement concrete in roof inc existing roof treatement (other than ground floor) and removing debris to a distance of n.exc 100M away from the bldg complete all as specified and directed..

Dismantling wrought iron or mild steel work of any description not other wise provided for. complete all as specified and directed.

Dismanting asbests cement ( corrugated, semi-currugated etc.) sheets in roof covering complete all as specified and directed.

S&F in frame at siteFactory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2, raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, as per specification & drawing

M&L for providing false ceiling with anodised aluminium snap grid frame work for false ceiling with size of grid 605 x 605mm with aluminium main tee, cross tee size 25x25x1.6 mm and aluminium wall angle size 25x25x1.8 mm fixed to wall hanging from soffits\trusses\bracking using adjustable supporting hanger compressing of GI wire 4mm thick with locking clip.complete all as sepcified and directed by Engr-In-Charge.

S & f glazed ceramic tiles of size 200 x 300 x 7mm coloured tiles as approved by Engineer-in-charge incl Rendering 10mm thick in M 1:4 for backing coat for tiles

M&L for glazed ceramic tiles, coloured, of size 350 x 250 x 7mm , as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed.

M&L non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of Each tiles exc 0.06sqm but n.exc 0.11 Sqm, io floors etc. set and joined in neat cement slurry and pointed in white or coloured cement to match incl M&l for screed bed or bedding layer of CM 15mm thick in CM 1:6

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified & directed.

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.42 but n exc 1.00 sqm in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick renderering in CM 1:4.mm all as specified & directed.

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.42 but n exc 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6.

M&L for Chequered cement concrete tiles with grey cement and pigments of size 300cmx300cmx20-25mm thick set, jointed and pointed in neat cement slurry over and including 15mm thick CM 1:6 screed bed in flooring complete all as specified & directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15650 - 2008 of 60mm thickness M-35 grade with grey cement and no pigment.

M & L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, with gery cement and no pigment, etc completed all as specified.

Material and labour 15mm thick rendering in CM 1:6 on fair fair faces of bricks wall or concrete surfaces finished even and fair omplete all as specified

Material & labour 15mm thick rendering in CM 1:4 mixed with water proofing asmixture as per manufacturer's instructions on dair fair faces of bricks wall or concrete surfaces finished even and smooth complete all as specified (WPA shall be measured and paid separetaly

M&L for rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and smooth without using extra cement.

M & L for 10 mm thick rendering in Cement Mortar 1:3 on fair faces of Brick works or Concrete surfaces in ceilings and finishing even and Smooth without using extra cement. complete all as specified and directed. Note : Roof projection/sun shade portion upto ht 7.50m incl necessary scaffolding

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished smooth and even without using extra cement.

M & L for applying two coats of distemper oil emulsion on walls over a coat of primer including preparing newly plastered wall surfaces complete all as specified and as directed.

M&L for two coats of cement base paint over a coat of primer on new surfaces of wall including preperation all as specified and as directed.

M&L Removal of existing treatment on walls and applying two coats of Altek superfine putty over one coat of altek primer to obtain smooth regular/even finish using sand paper and applying two coats of OBD of any tint complete all as specified and as directed.

M&L for three coats of white wash including preparation of new plasted ceiling all as specified and directed

M&L Preparation of plastered or unplastered old decorated surfaces and applying one coat of oil bound distemper on ceilings. complete all as specified and directed.

S&F vitreous china bowl urinal flat size 465 x 355 x 265 mm white with grating and union for discharge pipe incl PVC waste pipe, urinal spreader complete

S&F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern incl pedestal pan and trap, and connection to drain (or outgoing pipe) complete

S & F vitreous china squtting pan of Orissa pattern size 580mm X 440mm white with P trap or S trap front or back inlet and integral foot rests excluding flushing cistern and flushing pipe.

S & F PVC low level flushing cistern 10 litres capacity, syphonic action type, white, as approved including ball valve float valve and handle, flush pipe asin repair complete all as specified and directed.

S&F WHB vitreous china (flat back or angle back type ) ,including cutting for pinning in ends size 550x400 mm including brackets ,waste pipe ,coupling ,PVC connection pipe and CP piller tap complete. all as specified and directed. .

M&L RCC Type A1 1:11/2:3 (20 mm graded aggregate) as in flootings and foundations for coloumns

M/L RCC Type A1 1:11/2:3 (20 mm graded aggregate) as in in slab supored on wall complete as directed

M/L RCC Type A1 1:11/2:3 (20 mm graded aggregate) as in chajja complete as directed

M/L RCC Type A1 1:11/2:3 (20 mm graded aggregate) as in beam coloum etc. complete as directed

M&L RCC Type A1 1:11/2:3 (20 mm graded aggregate) in coloumn, pillars, piers, posts and struts

S&F in stainless steel kitchen plate rack size 786mm x 914mm 254mm & not less than 0.75mm thickness with fixed to wall with rawl plugs and screws complete all as specified and as directed ( as per drawing attached)

Materials and labour cleaning of concrete surfaces and applying priming coat using with bituminous primer @ 0.30Kg per Sqm followed by evenly a track coat @ 1.20 Kg per Sqm using with 85/25 grade industial bitumen, over it laid with APP modified plymer water proofing membrane with non-woven polyster reinforced of weight not less than 3 kg per Sqm unrolled and bonded to substrate with side and end laps 75mm as per manufacturesr's instructions and applying over it a tack coat using with 85/25 grade industrial bitumen @ 1.20kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous paint @ 0.200 kg per Sqm as per manufacturer's instructions

M&L CP Soap dish approximate size 100mm oval type or any type, fixed to plugs with chromium plated brass screws

Cleaning of manholes depth upto 1.5 mtr by removing all silt, sludge, any other materials making clean and flushing with water complete incuding removal of spoils out side MD land and taken out cover slab and reset in the same position after cleaning and testing all as specified and directed. cleaning shall be done either manually or mechanically as required and directed by Engr-in-charge.

S & F aluminium deco Grills (DG 104) with F section Channel complete of 4mm thick for windows of aperture 50 mm complete all as spd and directed.

M & L removal of existing treatment on walls and applying two coats of anti fungal weather proof paint (Apex) over one coat of primer to any tint complete all as specified and directed.

S & F in repairs health faucet with spray jet (hand shower) cromium plated incl all fitting & fixtures complete all as specified

S&F in repair two way bib cock/tap 15 mm chromium plated complete fancy type of branded as specified and directed.'

S&F in repairs PVC cabinet with door fitted with looking mirror size 422mm x 622mm(Make: Prayag) all as directed by Engr-in-charge.

S & F in repair Towel bar cromium plated incl all fitting & fixtures complete all as specified (Make : Hindware Cat no : F450024)

S & F in repair Wall Mixture cromium plated incl all fitting & fixtures complete all as specified (Make : Hindware Cat no : F320011)

S & F in repair Wash Basin with Pedestal Complete set incl all fitting & fixtures complete all as specified (Make : Hindware Cat no : 10098)

S & F in repair Soap Holder (Brass) incl all fitting & fixtures complete all as specified (Make : Hindware Cat no : F840004)

S & F in repair EWC of size 69x40x78 cm incl all fitting & fixtures complete all as specified (Make : Hindware Cat no : 92520 S-30)

S & F in repair Bip cock cromium platedincl all fitting & fixtures complete all as specified (Make : Hindware Cat no : F320004)

S & F in repair Towel ring icromium platedncl all fitting & fixtures complete all as specified (Make : Hindware Cat no : F890004)

S & F in repair Paper Holder with cover cromium plated incl all fitting & fixtures complete all as specified (Make : Hindware Cat no : F840009)

S & F in repair Single lever Basin Mixer w/o Popup Waste cromium plated incl all fitting & fixtures complete all as specified (Make : Hindware Cat no : F400009)

S & F in repair Bip cock long body with wall flange cromium platedincl all fitting & fixtures complete all as specified (Make : Hindware Cat no : F400002)

S&F in repairs stainless steel Kitchen plate rack of 20 gauge of size 34"x35"x9" all as specified and directed (Make : Hindustan) wt not less than 3.00 kg

M & L for rendering 15mm thick in cement mortor 1:4 (5 mm thick with IWPC over a coat of 10 mm thick ) on Brick wall surfaces, finished even and smooth without using extra cement ( IWPC measured separately )

M&L for preparation of new plastered surfaces and applying two coats of cement based paint over a Coat alkaliresistant priming paint on walls .

M & L for three coats of white wash on newly plastered surfaces on wall including preparation.

M & L for three coats of white wash on newly plastered surfaces on ceilling including preparation.

Figured glass pin headed quality in squre n.exc. 0.5 Sqm in each pane of 3.00mm thick.

M&L for two coats of synthetic enamel painting to new steel surfaces over a coat of red oxide zinc chrome including preparation of surfaces area exc 10cm width & girth.

M&L for 20mm thick Granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and rounding edges, over 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes complete all as directed and polishing complete

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

M & L for Concealed Conduit Point wiring with 1.5 Sq mm copper conductor single core PVC insulated cable FRLS type 1100 V multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1.6 mm thick MS duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified for : (a) One light point controlled by one, one way switch 5A, SP

(b) One ceiling / exhaust fan point controlled by one, one way switch

(c) One 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board

(d) One 3 Pin 5 Amps switch socket Independt board

(e) One Bell point controlled by one bell push

Description all as per item No 3 here-in-before but using 4 Sq mm single core copper conductor cable of multistranded PVC insulated FRLS 1100 Volts grade for 5/15 Amps switch socket combination point including running of 4 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

S & F Modular Switch 1 way 6 A, 1 Module capacity 230 Volts

S & F Modular Switch 1 way 16 A, 1 Module capacity 230 Volts

S & F Modular Socket, 6A- 2/3 combined 2 module of capacity 230 Volts

S & F Modular Socket, 6/16A- 2/3 combined 2 module of capacity 230 Volts

S&F Modular bell push 6A 1 module

Supply and fix Modular ceiling fan regulator 2 module step type AC 240 volts suitable for 1200/1400 mm sweep. Note : For Item No 5 to 10 :- Modular cover plate with frame, Modular Metal Flush Box and modular switches will be inclusive of rate quoted.

S & F Switch piano type single pole one way flush type 5 Amps capacity 230 volts.

S&F bell ding dong working on 230 volts AC Supply

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified.

S & F wall mounted box type LED of 18/22 watt with LED Lamp, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with 2 Nos round blocks with necessary fixing arrangements and connecting to the point wiring with necessary flexible copper conductor multistranded three core of suitable length & size from fitting to the ceiling rose complete and as directed by Engr-in-Charge. Make : Havells, Bajaj, Philips, Crompton Greaves

S&F lamp holder insulated body surface bakelite including LED lamp of 7 watt with back plate suitable for angle/batten fittings fixed with PVC round blocks all specified

S & F wall mounted LED batten of 09 watt with LED Lamp, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete all as specified and directed by Engg-in-Charge. Make : Havells, Bajaj, Philips, Crompton Greaves

S and F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 Volts double door with magnetic locking system complete all as specified.

S & F MCB SP 230V suitable for fixing on MCB DB of capacity 6 to 32 Amps complete all as specified and directed by Engg in Charge

S & F MCB SPN 230V suitable for fixing on MCB DB of capacity 40 Amps complete all as specified and directed by Engg in Charge

M & L for Submain wiring with two single core 4 Sq mm PVC insulated cable FRLS type copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of 25 mm dia medium grade including running up of 4 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

M & L for Submain wiring with two two core 6 Sq mm PVC insulated FRLS copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC concealed conduit and conduit accessories of 25 mm dia medium grade including running up of 6 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth earth lead 4 mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe med grade 15mm bore from earth elelctrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI pipe med grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 5 of SSR Part-I and connection to earth test point all as specified incl testing on completion. Note :- Item of Earthing includes cost of 7.5m long galvanised iron earth lead 4 mm size and protection pipe of 15 mm bore GI light grade.

Disconnecting and removing ceiling fan of 1200/1400 mm sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants including reassembling, including replacement of wornout/defective parts, capacitor 2.5 mfd capacity 240 volts, sealed ball bearing, rubber bushes and refixing in original position including minor repairs, for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc & testing complete and following items changed in place of unservericeable parts including Material and labour for rewinding of the ceiling fan complete with equivalent new super enamelled copper wire of existing gauge and weight as per manufacturer's design and instructions including varnishing for ceiling fan of any make and any sweep complete all as specified and directed including taking out burnt copper wire. Note: old winding material is property of the contractor

cutting holes of suitable size in walls, supply & fix Exhaust fan metal body with louvers of 300 mm sweep and connecting up with PVC insulated copper conductor multistranded cable of suitable size and specification as provided by the manufacturer/company from ceiling rose to connector and making good disturbed surface natching to existing colour incl geoting o nuts and bolts complete all as specified and as directed by Engr-in-Charge.

S & F 10 watt bulk head luminaire suitable for outdoor with high brightness giving glare free light and all as directed by Engg in charge.

S & F Security Lights of 1x25 watt LED light with high power LED and unique peanut lens to ensure uniform distribution and including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and directed by Engg-in-Charge.

M & L bracket made out of GI pipe of suitable dia not less than 1.2 mtr long and fixed on walls with 2 nos MS clamps made out of MS flat of suitable size thick complete with MS nuts, bolts and washers etc bent to required shape complete all as specified and directed by Engg-in-Charge

S & F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed by Engineer in charge

All as per item no.03 but for One 5 pin 15 / 16 Amps switch socket outlet point on independent board with 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed .

S&F Wall mounted indoor decorative 20W LED 6000K (4 ft.), extruded aluminium batten in anodised finish with opal diffuser, IP20 heat sink provided for efficient heat dissipation and integrated electronic driver, lamp color white complete set including necessary connection with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and directed.

S & F LED light fittings, 1x10 watts bulk head luminaires etc complete with all accessories and including connecting up with twin core twisted flexible PVC copper conduct cabe of 23/0.0076 from ceiling rose all as specified and directed.

S&F Sheet metal enclosure MCB distribution board including 200 Amps bus-bar single pole and neutral 240V, 4 Ways, double door including taking down of existing sheet metal enclosure complete all as specified and directed .

Supply and fix switch socket combination flush type multipurpose 5 in 1, 5/16 Amps, 230 Volts complete all as specified.

Supply & lay on wall / in ground / on pole XLPE insulated, armoured, heavy duty electric cables with stranded aluminium conductor, 1100 volts laid in trenches, ducts, pipes, drawn across the roads/paths/drains/along poles/walls/floors/equipment etc including jointing and testing complete all as specified of size 2 core 10 sqmm.

Supply & spread dry river sand duly approved in cable trenches for cable cushioning complete all as specified and as directed. NOTE :- Punned thickness of sand only will be measured and paid.

S& Lay PCC cable covers for LT cable protection, Class LV, Type 1 of size 250x150x40mm

S& Lay GI tubing light grade for protection of cable at roads crossing/hard standing/pole protection fixed with clamps as per site requirement etc all as specified and directed 40 mm dia.

Supply and laying steel water tubing, medium grade galvanised of size 15mm bore, ISI marked including all ISI marked fittings such as tees, bends, elbow, reducers, unions etc laid in trenches complete including cutting the existing pipe of any size as specified and directed

M/S P.SWAROOP KUMAR

BEEGEE DESIGN SYSTEMS

SAI RUPA CONSTRUCTIONS

K LAKSHMAN SINGH AND CO