Carrying out various electric works on Semi Turn key basis for system Augmentation and Strengthening of infrastructure in the area of EE, EUDD II, Mathura under the jurisdiction of SE, EUDC, Mathura

Cartage of following material from Store centre, Mathura to work site.

ST Pole (11 mtr. Long (Bottom Portion Galvanized)

PCC Pole (8.5 mtr. Long)

ST Pole Pole (13 mtr. Long) (Bottom Portion Galvanized)

630 KVA T/F

400 KVA T/F

LT XLPE cable of size 3.5x150 Sq. mm.

LT XLPE cable of size 3.5x240 Sq. mm.

11 KV XLPE Cable 3x185 Sq.mm.

11 KV XLPE Cable 3x70 Sq.mm.

LT XLPE Cable 3.5x70 Sq.mm.

11 KV Outdoor type 3x185 Sqmm. Cable jointing kit

33 kv CT 400/200/1-1-1 A,

PT KV PT 11/0.110KV

33 KV VCB 800 A, 750 MVA

33/11 KV 10 MVA T/F

Control Panel for Single T/F

Control Panel for Double T/F

ACSR Ins. Weasel conductor

ACSR Dog conductor

ACSR Rabbit conductor

Cartage of the material like various size 33 KV, 11 kv cable, dog/weasel conductor, Jointing kit, distribution transformers, ST/PCC Pole, cross arm, MS top channel, bottom channel, Tee-channel, clamps, Suspension Clamp, Dead End Clamp, Cross Arm Holding Clamp, Danger Board, Pin Insulator, Disc Insulator nut & bolts, Barbed, Earth Strip & EARTH wire etc (The Rates shall be quoted against those materials only, which are to be carriage from Store Center, Mathura to work site)

Digging of pit & erection of new Single support Pole (8.5 mtr. long) including grouting of pole and fixing of all Sturucture accessories, clamps, cross arm, pin/disc insulator & other accessories with providing stone pad as per relevant drawings. Any fabrication if required for above support.

Digging of pit & erection of new Double Pole Structure ST Pole (13/11 mtr. long) including grouting of pole and fixing of all Sturucture accessories, clamps, cross arm, pin/disc insulator & other accessories with providing stone pad as per relevant drawings. Any fabrication if required for above support.

Earthing of ST/PCC pole/Body earthing of T/F. by M.S earth rod.

Painting of ST pole. Red Oxide

Digging of pit & erection of Stay rod with grouting cement sand and brick ballast including Nuzzling, binding Complete.

Installation of 33 KV VCB 800 A, 750 MVA

Installation of Control Pannel for Single T/F

Installation of Control Pannel for Double T/F

Installation PT KV PT 11/0.110KV

Plinth & Foundation of 33 KV VCB

Pipe in Pipe Gel Earthing for 33 KV VCB & Control Panel

Suppply and Installation of Vaccume interrupter suitable for different make 11 KV VCB (Panel) 1. ABB Make-09 2. Stelmac Make-09 3. BHEL Make -09 4. Biecco Make -09 5. Crompton Greeves-09 6. Yamuna Bansion-09

Laying Dog conductor on erected poles of 33 KV / 11 KV Line

Laying of 11 line on Rabbit conductor on erected poles.

Jumpering & Bidning of Dog conductor

Laying of weasel conductor

Providing & Laying of Control Cable 4x2.5 mm sq.

Laying of LT 3.5X70 XLPE Cable

Laying of LT 3.5X150 XLPE Cable

Guarding of 33KV line (upto 50 mtr.)

Providing & fixing of Stone pad,

Providing & fixing of Danger Board,

Fixing of 33 KV V type Steel Cross Arm

Fixing of 11 KV V type Steel Cross Arm

Fixing of 11 KV V type Steel Cross Arm Holding Clamp

Providing & fixing of MS Nut, Bolt and Washer's

Delta Earthing for 33 KV Lightening Arrestor

Fixing & Installation 33 kV CT 400/200/1-1-1 A,

Providing & fixing of Guarding Angle for 33 KV / 11 KV line

Providing & fixing of I Bolt for Guarding

Providing & fixing of Aluminium Biding Wire for Guarding

Providing & fixing of G.I. Wire 6"/10" SWG

Providing & fixing of G.I. Pipe 4"/6" dia

Providing & fixing of Clamp For G.I. Pipe

Providing & fixing of Clamp for Tee channel

Providing & fixing of Packing Piece Clamp for 33 KV with nut & bolts

Providing & fixing of 11 KV F Bracket

Fixing of 33 KV Pin Insulator with pin

Fixing of 11 KV Pin Insulator with pin

Fixing of Disc Insulator 45 KN & 70 KN (T&C/B&S)with fitting

Providing & Fixing of MS Angle 65x65x6x2700mm Bracing set with 04 Nos. clamp

Fixing of Disc fitting 45 KN & 70 KN (T&C/B&S)

Fixing of Top channel 125x65x2240mm

Fixing of Dropper channel 100x50x2028 mm

Fixing of MS Tee Channel

Providing & fixing of Aluminium Lug 70 sqmm.

Providing & fixing of Aluminium Lug 150 sqmm.

Re-sagging of old & constructed line

Fixing & Fillinf of Outdoor type Jointing kit for 11 KV 3x70 sqmm. cable

Fixing & Fillinf of Outdoor type Jointing kit for 11 KV 3x185 sqmm. cable

Providing & Fixing/Installation of C Type LT Panel Disconeccting and dismentling of existing C panel and Supply, installation testing commisioning of factory fabricated & wired metal clad dust and vermin proof double door type outdoor application stand mounting, M.S. Channel Base incliding channel stand with bottom cable entreis The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on nonhygroscopic supports such as CMC/BMC support. panel shall be complete with suitable cable end boxes, double compression glands. panel comparment having special provision for internal locking system for stop the electricity theft The panel board shall be fabricated with gelvnized prime sheet with a minimum thickness of 1.6mm/2mm. with seven tank process powder coated. panel haveing proper space for connecting incomming and outgoing cable terminations.

Providing & Fixing OF LT ACB FOR 11/0.4KV, 400 KVA T/F (L/S RATE)

Providing & Fixing OF LT ACB FOR 11/0.4KV, 250 KVA T/F (L/S RATE)

Supply of 160 mm OD PN-4 PE-80 Grade UV stabillized HDPE Pipe as per IS: 4984 in 6 meters

Digging of trench by excavation of earth 0.90/1.5 Mtr. deep put brick on both side, filling of sand & brick on cable & earth ramming and dressing properly with complete job of laying LT/33/11 KV XLPE cable in trench

Horizontal Drilling underground installation piping HDPE Pipe 160mm dia with minimum depth of pipe 1.2 below surface for double circuit length of line

Laying of 33/11 KV XLPE cable on Double Pole structure & air and filling of cable jointing kit with proper dressing.

Laying of LT XLPE cable in Trench/Double Pole structure & air and filling of cable jointing kit with proper dressing.

Providing & Fixing Holding Clamp(cross arm & F Bracket)

Complete Job for Installation of control panel for single T/F.

Complete Job for Installation of control panel for double T/F.

Concreting of Pole/PCC Pole (ST 13/11/8.5 Mtr

Installation of 11/0.4 KV, 400 KVA T/F Mobile Trolley

Installation of 11/0.4 KV, 630 KVA T/F Mobile Trolley

Trolley Structure for 400 KVA T/F with vehicle tyre,rim,coupling ,trolly hook,earthing, painting and related accessories with complete job

Trolley Structure for 630 KVA T/F with vehicle tyre,rim,coupling, trolly hook,earthing, painting and related accessories with complete job

Water Level Earthing

Opening of Jumper & Connection & Earthing of Body & Neutral of existing 5 MVA T/F. and Dismantling of Neutral Earthing frame, cable frame and Safe shifting of 5 MVA T/F. from Plinth to yard corner.

Re-fixing of 33 KV Cable, Jumper & Earthing (Neutral & Body Earthing connected by electric welding)., Erection of Neutral Earthing frame, Cable frame

Complete chemical earthingof 11/0.4 KV 250/400 Distribution Transformer by digging pits 6” dia upto 3 mtr. deep including chemical filled pipe in between (pipe-in-pipe) ISI mark B Grade & connecting with G.I strip of size 50mm X 6mm with neutral/body of 11/0.4 KV distribution transformer to above pipe-in-pipe (PIP) and filling of chemical crystalline conductive mixture containing highly conductive material around the (pipe-in-pipe) up to 3 Mtr. including making of chamber at the top of the earthing. Other details are as below:- 1.Earth pipe material – mild steel, Galvanised. 2-Main Electrode diameter – 42.4mm. 3-Auxiliary Electrode pipe, Diameter – 76mm. 4-Wall Thickness of main Electrode :- 2.6mm. 5-Wall thickness of auxiliary Ist whole:- 3.2mm. 6- Length of earthing electrode (PIP):- 3 Meter.

Construction of M.S angle fencing of size (3M x3M x2M) around the plinth of 400/250 KVA transformer and gap between the M.S angle should not be more than 65mm.

Testing, commisioning & Enersization of new 10 MVA Power T/F.and 11 KV Feeders and connect it to existing system.

Dismantling of single support ST Pole/Double pole(13/11/9mtr.) PCC pole with complete accessories, OLD & Damage TPMO/old isolator, 5 MVA Power T/f. old & damaged Incoming/Outgoing VCB along with associated infra and dismatled HT/LT Line, scrap etc from work site to Store Center, Mathura with safe loading & unloading.

Road restoration of Kaccha/Pucca

M/s G.D. Electricals