GE/SRA/T-48/2025-26

Attending to complaints pertaining to unserviceability of Security Lights and High Mast Lights, of any make or capacity and any other related electric complaints, installed on poles, walls, buildings, high masts (incl lowering of lantern carriage) inside Tech Area of AF Stn by deploying skilled electrican for inspection and identification of the nature of defects complete all as specified and directed. NOTES:- (i) The contractor shall ensure that his supervisor meets the concerned JE or complaint cell attendant every morning on working days and obtain details of the complaints received. The complaints may also be communicated to him telephonically. He will subsequently deploy suitable labourers to attend and rectify the complaints on the same day. (ii) All endeavor shal be made to rectify the defects on the same day. However, in case large scale repairs or replacement of luminaire is required the same shall be conveyed to the JE/Engineer-in-Charge immediately. (iii) Rectification of the defects shall be measured and paid seperately. (iv) Failure to attend the office or attending to the complaints on the same day will attract a penalty of Rs 100/- per day per complaint and the same shall be recovered form the payment due to the contractor. Decision of GE, in this regard, shall be final and binding. (v) A complaint register containing 100 pages shall be provided by the contractor for maintaining records of the complaints attended. Cost of the same shall deemed to be included in the quoted rate. (vi) Any single luminaire, involving multiple defects, shall be considered as one unit. (vii) Measurement for light fittings, to be repaired or replaced under Sl Item No 02, 03 & 04 shall be recorded seperately and payment shall be made seperately for Light fittings recorded under Item No. (01 & 02), Item No (01 & 03) and (Item No 01 & 04). (viii) Pole No. & details of repairs shall be recorded in tabular form with alphabetically ascending order viz D-1, D-2, T-1, T-2 and so on.

Repairing of unserviceable/defective light fittings (without taking down of light fittings), of any type or wattage, fixed on poles/walls/buildigs/high mast, etc by replacing all unserviceable parts like driver, SPD, led lamp, etc, or any other repairs in connections, junction boxes etc, properly cleaning the luminaire and checking for proper functionality after repairs including testing complete all as specified and as directed by Engr-in-Charge. NOTES :- (i) Accessories/Parts required for repair of Light Fittings will be Measured & Paid under appropriate Items of SCHEDULE 'A' (BOQ/PRICE SCHEDULE) here-in-after as 'Supply Only'. (ii) Quoted rate shall be deemed to include for the cost of minor spares, accessories (other than mentioned here-in-after) and consumables required for satisfactory repair of light fittings. No claim shall be entertained during currency of work. (iv) In order to avoid delay in rectification of defects, the Contractor shall ensure that certain parts & accessories of light fittings, in requisite qty as directed by Engineer-in-Charge, shall be procured before hand and deposited with the concerned JE, who will issue the same to contractor's supervisor daily for carrying out the repairs. On exhaustion of the stock, the same shall be reiplenished by the contractor. (v) Any light fitting involving multiple repairs will be measured as one unit. However, replaced parts will be measured seperately.

Repairing of unserviceable/ defective light fitting (including taking down of light fittings), of any wattage from poles /walls/ high mast/buildings, etc after disconnecting all electrical connections, by replacing unserviceable parts like driver, SPD, PCB, led lamp, GI pipe brackets, etc, properly cleaning the complete luminaire and re-fixing in its original position including checking for functionality and testing complete all as specified and as directed by Engr-in-Charge. NOTE :- (i) Accessories required for repair of light fittings will be Measured & Paid under appropriate Items of SCHEDULE 'A' (BOQ/PRICE SCHEDULE) here-in-after as 'Supply Only'. (ii) Quoted rate shall be deemed to include for the cost of minor spares, accessories (other than mentioned here-in-after) and consumables required for satisfactory repair of luminaires. No claim shall be entertained during currency of work. (iii) In order to avoid delay in rectification of defects, the Contractor shall ensure that certain parts & accessories of light fittings, in requisite qty as directed by Engineer-in-Charge, shall be procured before hand and deposited with the concerned JE, who will issue the same to contractor's supervisor daily for carrying out the repairs. On exhaustion of the stock, the same shall be reiplenished by the contractor. (iv) Any light fitting involving multiple repairs will be measured as one unit. However, replaced parts will be measured seperately.

Taking down of unserviceable/ defective light fitting, of any wattage from poles /walls/ high mast/buildings, etc after disconnecting all electrical connections and removed from site complete all as specified and directed by Engr-in-Charge. NOTE :- (i) Only those light fittings, which after inspection are found to be beyond repairs and to be replaced with new light fittings, shall only be measured under this item. The unsv light fitting shall be first got inspected in presence of JE/Engr-in-Charge before removal from site.

S&F LED Street Light fitting, 45 watt capacity, in high pressure die cast aluminium housing with prismatic polycarbonate modular secondary lens optics with integrated constant current electronic driver, IP66 ingress protection, impact resistance of IK07 complete all as specified and directed and complying with the following specifications:-. (a) minimum system efficacy 120 lumen/watt (b) CRI not less than 70, (c) THD < 10% (d) Power Factor not less than 0.90 (e) having in built short circuit and surge protection upto 4 kV (f) having 10 KV external surge protection (for 45 watt & above) (g) colour temperature not less than 5700 degree K (h) life not less than 50000 hours of operation

-ditto- but for 60 Watt LED Street Light Luminaire

-ditto- but for 70-72 Watt LED Street Light Luminaire

-ditto- but for 90 Watt LED Street Light Luminaire

Supply only Bracket/Arm suitable for street light fittings, made out of 25 mm bore (light grade) GI pipe length not exceeding 1.20 metre long, along with 02 sets of flat iron clamp of size 40mm x 6 mm, with bolts, nuts and washers of suitable size duly painted with two coats of aluminium paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

-ditto- but bracket with 32 mm bore light grade GI pipe