Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance H NO 18 7 599 32 A VIVEKANANDA NAGAR CHATRINAKA HYDERABAD 500 053 | HYDERABAD | HYDERABAD | TELANGANA | 500053 | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
26 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE GOLCONDA
GE GOLCONDA LANGER HOUSE OPP MILITARY HOSPITAL HYDERABAD TELANGANA-500 008
SPL REPAIRS TO BLDG NO 134/01 TO 08 (08 X OR MD ACCN) AT NEW MD LINES FOR CERTAIN UNIT UNDER GE GOLCONDA
2022_MES_560335_1
8637/E8
Open Tender
Civil Works
Item Rate
180 days
HYDERABAD
As Per Tender
9 documents required · 9 mandatory
₹500
GE GOLCONDA
₹90,000
Yes
28 Nov 2022
29 Oct 2022
28 Nov 2022
29 Oct 2022
26 Nov 2022
12 Nov 2022
Amount
Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground floor) and rubbish off the premises complete all as specified and directed.
Demolition of Concrete of any description and in any position not otherwise specifically provided for, cement concrete ( un-reinforced), etc and rubbish off the premises complete all as specified and directed.
M&L 75mm thick plain cement concrete 1 : 3 : 6 mix type C2 (using 40mm graded stone aggregate) as in plinth protection laid in alternative bays and finished even and smooth with out using extra cement including necessary form work complete all as specified and directed.
M & L 75 mm thick PCC 1:4:8 Type D2 (using 40 mm graded stone aggregate) in sub bases, floors and pavings etc complete all as specified and directed.
M & L 25 mm thick PCC 1:2:4 Type B0 (using 12.5 mm graded stone aggregate) in sub bases, floors and pavings etc complete all as specified and directed.
Demolition of reinforced cement concrete of any description in any position and rubbish off the premises complete all as specified and directed.
Demolition/ Dismantling of 500 ltrs capacity broken RCC Hume pipe overhead water tank including hoisting down the roof slab using suitable crane / lifting arrangement and disposing off outside of the cantonment premises complete all as specified and directed.
M & L for 40 mm thick, Precast cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in kitchen platforms and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed.
M & L Granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window-cills, cooking platforms,over 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etc complete all as specified and directed.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises AND M&L for Non skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm, but n exc. 0.11 sqm, in floor etc. set and jointed in net cement slurry & pointed in white or coloured cement to match over and including 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and directed.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises AND M&L non skid coloured ceramic floor tiles 7-8 mm thick (square/ rectanglar ) area of each tile exc 0.11 sqm but n'exc 0.18 sqm , set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and directed.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises AND M&L glazed ceramic coloured tiles in vertical surface 375x 250x 7mm thick set and and jointed in cement slurry and pointed with white or coloured cement to match including 10mm thick rendering/backing coat in CM 1:4 on fair faces of brick work or concrete surface complete all as specified and directed.
M&L chequred cement concrete tiles 25 cm x 25 cm x 25 mm thick with grey cement and pigment, machine pressed : set, jointed and pointed in neat cement slurry in floors over and including 15 mm thick screed bedding layer in CM 1:6 complete all as specified and directed.
M & L for 20 mm thick, Machine cut polished kota stone slab flooring over 20 mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed.
M & L for 20 mm thick, Machine cut polished kota stone slab as in tread of steps including bullnosing and 02 Nos grooves cutting on each step over 20 mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed.
M & L for 20 mm thick polished Kota stone slab over 15 mm thick rendering in cement mortar 1:3 as in backing coat in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar and rubbish off the premises complete all as specified and directed.
M&L for Brickwork with sub class ‘B’ bricks, old size one brick straight or curved on plan exc 6m mean radius, built in CM 1: 6 complete all as specified and directed.
M&L for brickwork with sub class B Bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
Taking down cement or cement lime plaster on brick or stone walls/ceiling including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.
M&L for 15mm thick in CM 1:4 rendering on brick or concrete surfaces finished even and smooth without using extra cement including preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on wall surfaces complete all as specified and directed.
M&L 15mm thick plastering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement including preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali-resiatant primer and 1.5mm thick Birla wall care putty on plastered surrfaces complete all as specified and directed.
M&L 5 mm thick plastering in CM 1:3 finished even and smooth w/o using extra cement on concrete surface of ceilings including preparation of new surfaces of ceiling and applying three coat of white wash complete all as specified and directed.
M&L 15mm thick plastering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement including preparing newly plastered surfaces and apply three coats of white wash on walls complete all as specified and directed.
M&L for Type E2 1:5:10 (Using 40 mm graded stone aggregate) in filling and mass concrete (sunken floor filling) complete all as specified and directed.
M&L 10mm thick rendering in cement mortar1:3 with WPC @ 3% on fair faces of brick or concrete surface,etc complete all as specified and directed. (Note: WPC will be paid separately)
M & L for a coat of bitumen VG-10 @ 1.20 kg/sqm over a coat of bitumen primer 0.70 kg/sqm etc complete all as specified and directed.
M&L APP modified pre-fabricated five layer water proofing membrane 3 mm thick not less than 3.60 kg/sqm as in sunken floors complete all as specifed and directed.
M&L 50mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sunken flooring (top) complete all as specifed and directed.
Supply only integral water proofing compound
Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each and removing to or from store complete all as specifed and directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm but n exc 4.00 each and removing to or from store complete all as specifed and directed.
Taking down shutters of any description n. exc. 1 Sqm each and removing to or from store complete all as specifed and directed.
Taking down shutters of any description exc. 1 Sqm but n exc 2.00 sqm each and removing to or from store complete all as specifed and directed.
M&L 2nd class hard wood plain straight solid chowkats and frames wrought, framed, rounded, chamfered put together with glue pinned joints complete all as specifed and directed.
S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts of size 25x3MM MS flat; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specifed and directed.
M&L for cement concrete 1:3:6 type CI using 20mm graded stone aggregate in bed black for hold fasts and coping incl necessary form work weathering slighly rounded or chamfered angles and treating and making good the disturbed portion complete all as specifed and directed.
S&F Window guard bars, plain, fillet in wodden frames, L or T section section suppores for shelves etc. and similar articles conforming to Fe 290-0 or Gde E-165 complete all as specifed and directed.
M&L 2nd class hard wood plain framed panel shutter 35 mm thick (two or three panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specifed and directed.
S&F 35 mm thick IInd class hard wood glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge (without sash bars ) edges of framing plain, chamfered or rounded, fitted with cut and miterd beads for securing glass or gauge etc. complete all as specifed and directed.
S&F 30 mm thick 2nd class hard wood glazed and skeleton shutter of divided into square, with plain chamfered or rounded metred and rebital sash bar any number and framing moulded windows, ventila-tors, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.20 (b) fitted to chowkats complete all as specifed and directed.
S&F for 18 mm plywood, grade BWR, type BB fixed with screws to timber frame work complete all as specifed and directed.
S&F MS Butt hinges medium weight cold rolled of size 100mm complete all as specifed and directed.
S & F Aluminium anodised,barrel tower bolts of extruded section and fixed, length of bolt in 200 mm etc complete all as specifed and directed.
S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised complete all as specifed and directed.
S & F for Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 300 mm etc complete all as specifed and directed.
S & F in repairs 300mm, ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specifed and directed.
S&F MS Butt hinges medium weight cold rolled of size 75mm complete all as specifed and directed.
S & F 150 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specifed and directed.
S & F 100 mm length of extruded aluminium alloy handles, fabricated type., anodised complete all as specifed and directed.
S&F mild steel wire type I, gate & shutter, hooks & eyes 150 mm size complete all as specifed and directed.
S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.4 mm & fixed with stainless steel wire staples fixed complete all as specifed and directed.
M&L preparation of new surfaces of wood or wood based material description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specifed and directed.
S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening etc complete all as specifed and directed.
M & L factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing at site as per specification and drawing complete all as specifed and directed.
S&F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as specifed and directed.
S&F in repairs 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed complete all as specifed and directed.
S&F in repair of 25 mm dia Drapery curtain rods powder coated decorative type complete all as specifed and directed.
S&F in repair fancy powder coated brackets for 25 mm dia drapery curtain rods complete all as specifed and directed.
S&F 3mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specifed and directed.
S&F 3mm thick figured glass, pin head type andd glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specifed and directed.
Taking up or down for bore of pipes in 15 mm, steel tubing and connections, including cleaning for refixing or removal to store etc AND Supplying and fixing 16 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling complete all as specifed and directed.
Taking up or down for bore of pipes in 20 mm, steel tubing and connections, including cleaning for refixing or removal to store etc AND Supplying and fixing 20 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling complete all as specifed and directed.
M&L for Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10 cm but not exc 20cm girth complete all as specifed and directed.
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top )of 500ltr capecity hoisted and fixed in position including dismantling pvc water tanks of capacity 500 ltr and removing to store complete all as specifed and directed.
Supply and fixed in repair 15 mm bore Bib taps cost copper alloy Chromium plated with fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specifed and directed.
S&F in repairs 15 mm dia Stop valves, cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union with long shank and cup fixed complete all as specifed and directed.
All as per item No.67 but concealled stop cock
S&F CPVC ball valves, with CPVC lever, screwed both ends to pipes of 20mm bore fixed complete all as specifed and directed.
S & F in repair 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed
S&F PVC connection 15mm dia, 450 mm long with brass ferrules on both ends fixed in repairs complete all as specified and directed
S & F in repairs for Vitreous China wash basin, white, flat back, size 630x450mm including cutting for & pinning in ends of brackets or erracting stand but exclusive of fixing of supply of waste pipe fixed complete all as specified and directed
S&F in repair PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and directed
S & F in repairs 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement & other end fixed complete all as specified and directed
S & F in repairs 40mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement & other end fixed complete all as specified and directed
S&F for Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls,ceilings or in floors as waste pipe etc. Bore of pipes in 32mm, etc complete all as specified and directed
S & F in repairs 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, swan pipe, screwed for iron pipe and fixed complete all as specified and directed
S & F in repair Vitreous China squatting pan , water closet "Orrissa" pattern size 580 X 440 mm white with intgrel footrest (excluding flushing cistern & flush pipe complete including provision of cement concrete complete all as specified and directed
S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, etc complete all as specifed and directed.
S&F in repairs stainless steel plate rack made out of stainless steel (Non magntic type) of 22 gauze sheet of size 36" x 30"x 10" complete all as specified and directed
S&F towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified and directed
S&F 15 mm dia Brass chromium plated shower rose 125 mm size fixed in repairs complete all as specified and directed
Excavation in trenches n.exc 1.5m wide & n.exc 1.5m depth for fdn etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard and dense soil complete all as specified and directed
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed
M&L for removing excavated surplus soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed
Dismantling of cast iron/AC/PVC pipes100/110mm dia, jointed in cement mortar and taking out of trenches if required complete all as specified and directed
Dismantling of cast iron/AC/PVC pipes 75 mm dia, jointed in cement mortar and taking out of trenches if required complete all as specified and directed
M & L for Cement Concrete 1:3:6 type C-2 as concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 100 mm dia SWG pipe complete all as specified and directed
S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, bore of pipe in 110 mm, etc complete all as specifed and directed.
All as per item No.89 above but fixed to walls. (At any height of building, till 4 floors also).
S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, bore of pipe in 75 mm, etc complete all as specifed and directed.
All as per item No. 92 above but fixed to wall. (At any height of building, till 4 floors also).
M&L 110 mm bore PVC( SWR ) bend with oval access doors including taking down existing one complete all as specifed and directed.
All as per item No.94 above 75mm dia.
S & F for PVC (SWR) vent cowl, bore of pipe in 110 mm, etc complete all as specifed and directed.
S&F PVC (SWR) bends (size of bore 110mm) complete all as specifed and directed.
M & L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement, diameter of outlet in 75 mm, etc complete all as specifed and directed.
M&L in repairs for salt glazed stone wave gully traps square or rounded mouthed tape & fix 150 x 150 mm fixed in cement concrete complete all as specifed and directed.
S & F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms), etc complete all as specifed and directed.
S & F Continuous (piano) hinges,mild steel, bright finish or electro galvanised,Width of flaps (when open) in 30 mm etc complete all as specifed and directed.
S & F for Extruded aluminium alloy handles, fabricated type,anodised, Size of handle in 75 mm etc complete all as specifed and directed.
M&L 2nd class hardwood exc 13 & n exc 25 sqcm Plain fillets. square, rectangular or triangular in section, clean sawn, se cured with nails or brads complete all as specified and directed.
M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof padding (top) complete all as specifed and directed.
M&L for APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm laid over primed surface including bituminious primer conforming to IS -3384 applied @ 0.3 ltrs/sqm by forced application over finished with one coat of aluminium paint @ 100 ml/Sqm, 10 cm overlap fused uniformly by LPG torch flame, including rendering 10mm thick in cm 1:4 on concrete surfaces of roofs, parapet etc. finishing to surfaces even and smooth without using extra cement and provinding necessary slope with using WPC @ 3% by weight of cement complete incl taking down existing froof treatment and cement plaster of any description, roughing, preparing the surface by cleaning the surface with wire brushing scrubbinbg down with water to receive new treatment complete all as specified and directed.
M&L for Reinforced cement concrete type B-1 (1:2:4) (using 20mm aggregate) as in shelves, chajja and the like complete all as specified and directed. (Note: Reinforcement will be measured & paid separately)
M&L for Form work to soffits of suspended slabs such as roof slab, floor slab. Shelves etc finished fair surface complete all as specified and directed.
S & F TMT bars 6mm dia and over upto and incl 8mm dia as in reinforced, incl binding with and incl MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M & L PCC 1:2:4, type B1 (using 20 mm graded stone aggregate as in pre-cast cover slabs for manholes incl necessary form work set in CM 1:4 all as specified. (Note: Reinforcement will be measured & paid separately)
M&L for 1.5mm thick decorative laminate type-1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instructions complete all as specified and directed.
Taking down existing sub main wiring /Service wire of any description and size including earth wire, batten, conduits and making good the disturbed surfaces of walls, floors etc.
Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power) including unserviceable fittings such as switches, ceiling roses, pendents, regulators, socket, light fittings etc complete and making good disturbed surfaces of walls, floors etc.complete all as specified and as directed
M&L Point wiring for one light point/ fan point/ bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including non metalic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for concealed wiring on stone/ brick, masonary walls,roof etc including in sunk box of required size & 2 mm thick plastic laminated sheet for housing switches sockets, regulators etc, including making good the disturbed surfaces to match with the existing specification includind Taking out carefully copper/ aluminium point wiring, Light, fan, socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/ floors complete complete all as specified and directed
All as per Item No.113 but One 3 pin 5/6 Amps switch socket outlet on independent board complete all as specified and directed
All as per Item No.113 but One 3 pin 5/6 Amps switch socket outlet on same board complete all as specified and directed
All as per item No.113 but for One 3 pin 15 / 16 Amps switch socket outlet point on independent board with 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed
Supply and fix switch piano flush type single pole one way 5 Amps complete all as specified and directed.
M&L switch socket combination flush type 5/6 Amps Multipurpose 2 in 1, 3 pin/5 pin with porcelain base complete all as specified and directed
M&L Switch socket combination 2 in 1 flush type universal 3 pin 5 & 15 Amps complete all as specified and directed
Supply and fix Ceiling rose surface bakelite three 65x50 mm, terminals 240 volts complete all as specified and directed.
M&L Fan Regulator (Rotary step type, Switch/Socket type Dimmer) 230/240V, AC complete all as specified and directed
Supply and fix lamp holder insulated body with back plate suitable for battern fittings complete all as specified and directed.
M&L Bell push, flush type, 5 Amps complete all as specified and directed
M&L bell Ding Dong AC, 230 V single pole all as specified complete all as specified and directed
Supply and fix 9/10 watt LED Bulb, base B-22 complete all as specified and directed.
S&F Sheet metal enclosure MCB distribution board including 200 Amps bus-bar single pole and neutral 240V, 8 Ways, double door including taking down of existing sheet metal enclosure complete all as specified and directed
All as per item No-126 above but TPN 4 way, 415 V complete all as specified and directed
Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed
Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed
S&F MCB Tripple pole and neutral , 63 Amp, 415 Volts AC complete all as specified and directed
S&F 25W energy saving and environmental friendly long life LED building security street light made up of pressure die cast aluminium housing with high power LED, lens & toughened glass, potted driver, IP 66 protection including connection with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed
S & F LED light fittings, 1x10 watts bulk head luminaires etc complete with all accessories and including connecting up with twin core twisted flexible PVC copper conduct cabe of 23/0.0076 from ceiling rose complete all as specified and directed
M&L for Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 6 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 6.0 Sqmm as earth lead in and including PVC conduit medium grade/casing caping with all fittings suitable for concealed/surface type and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed
M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I all as specified and testing on completion including provision of earth lead protected by 15 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note:- Rate quoted by tenderers shall be deemed to include for following provisions-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 m. [ii].PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 20mm bore medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 15 mm bore light grade 7.5m.
M/s cogent constructions
NAVANAND ENTERPRISES
harshraj and co
BUILDWEL
M/S Veerabhadra Constructions
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .