RM/HG/TENDERS/ELEC/24-25/18

Amount

Supply of Main Distribution Panel for incoming power. 125 AMP SFU for Incoming-1 No. 63 AMP SFU for Gr. Fl. & 1st Fl. 6 Nos outgoing.

Supply & fixing single door 12 Way DB Distribution Board with IP-42/43 protection, concealed in wall wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment for UPS Raw Power.

Supply & Fixing 200 Amp (Havells Make) MS Sheet metal busbar on iron angle iron frame with 4 bars.

Supply & fixing of 3 ph ( 3 pole + N) 200 Amps ,415 volt , 50 Hz Change over

Supply & Fixing 2X22W LED Tube light fitting complete with all accessories lamp directly on wall/ceiling HW block and suitable size of fastener, ceiling plate, nipples etc. As per PWD schedule 14 (c) of page C-2. ( Gr Floor- 8 nos , 1 st Floor - 24 nos , 2 nd Floor - 26 nos .)

Supply & Fixing & electrical connection from Switch Board with complete of 48 inche fan on wall/ceiling. As per PWD schedule 21 (a) of page C3. ( Gr Floor- 2 nos , 1 st Floor - 21 nos , 2 nd Floor - 20 )

Supply & Fixing exhaust fan & electrical connection from Switch Board after making hole in wall and making good the damages and smooth cement finish etc as practically as possible and providing necy. Length of PVC insulated wire and making connections for exhaust fan of following diameter. (b) 30 cm(12'').As per PWD schedule item no.28(b) of page C-4. ( Gr Floor- 2 nos , 1 st Floor- 4 nos , 2 nd Floor- 6 nos )

Supply and fixing 240V 16 A 3 pin Modular type plug socket(Brand approvd by EIC) with modular type switch , without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board . connections with PVC Cu wire and earth continuity wire etc(As per PWD schedule item no.9 (b) of page no. E-18) ( Gr Floor - 2 nos , 1 st Floor - 2 nos , 2 nd Floor- 2 nos)

Supply, delivery, fittings, fixing and electrical connection of (including freight, insurances, incidental charges, Taxes , Duties, Cess etc, as applicable) for single phase 240/250 V , A.C. 50 Hz. 6 AMP, 5 Pin Plug socket with switch Modular (Havell’s) including Modular Switch Board. As follows ( Gr FL , 1st FL-4 nos , 2 nd FL .- 6 Nos )

Supply & fixing 240/250 V , A.C. 50 Hz. 6 AMP, electric bulb Holder

Supply & fixing 240/250 V , A.C. 50 Hz. 6 AMP, electric bulb Holder for Emergency Light ( 4 nos x 3 Floor )

Supply & Fixing of outdoor type 150W MH/SV light fittings on building with all accessories to be 40 mm dia x 1.68 long GI pipe (ISI medium) bracket with 40 mm x 10 mm thick , MS clamp etc. and providing wiring with 2x1.5 sqmm. PVC insulated & straded annealed copper wire (single core) and making connection as required. As per PWD schedule 18 of page C3.

Supplying & fixing 240/215 V MCB isolator on din rail of existing DFs & necessary connection . Havells 40A: DP ( Gr Floor- 0 nos , 1 st Floor- 1 nos , 2 nd Floor- 1 nos , spare -2 )

Supply & fixing 240/215 V MCB of Breaking capacity 10KA & C charecteristics on din rail of existing DBs & necessary connection. Havells -16 A: SP ( Gr Floor- 1 nos , 1 st Floor- 7 nos , 2 nd Floor-7 nos , spare 2 nos per floor )

Earth Busbar: Supply & fixing earth busbar of galvanized (Hot Dip) MS flat 25mmX6mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI boults, nuts, washer, spacing insulator etc as required.

Supply and fixing Electronic socket type 5-step fan regulator on existing modular switch board with modular top cover by screw after making housing for regulator knob including necessary connection (Brand approved by EIC).

Supplying and fixing medium gauge GI pipe( ISI-Medim) 50 mm dia Protection with necessary fittings and jointing materials as required(for Raod crossing).As per PWD schedule item no.11(d) of page F-6

Supply & Fixing 100 W bulkhead light fittings (Havells make ) with dia cast alluminium housing and frosted glass on wall/celling including supply & fixing 8 w CFL Lamp complete set as per PWD Schedule item no 23 of page no D-13 (Entrance of building )

Wiring in 1.1 KV single core stranded "FR" PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25 mm casing- capping (Pestro Make) incl, PVC clips, fittings etc. for incoming from Main Panel to Sub DB(1). a) 3x84/0.3 (6 sq.mm) + 1x56/0.3 (4 sq.mm) as ECC from main panel to Lighting DB (1 & 2).

Wiring in 1.1 KV single core stranded "FR" PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25 mm casing- capping (Pestro Make) incl, PVC clips, fittings etc. for incoming from Main Panel to Sub DB(1). a) 3x84/0.3 (6 sq.mm) + 1x56/0.3 (4 sq.mm) as ECC from main panel to Lighting DB (1 & 2).

c) 2 x 36/0.3(2.5 Sq.mm.)+1x22/0.3(1.5 sq.mm) as ECC from DB to Power Point (16 A-6 Nos)

d) 2 x 36/0.3(2.5 sq.mm.)+1x22/0.3(1.5sq.mm) as ECC from DB to Switch Board at Cash counter, SM Room others room, Stair etc. (10 Nos Switch Board)

e)2x84/0.3 (6 sq.mm) + 1x36/0.3 (4 sq.mm) as ECC from UPS Raw Power DB to UPS Metal Plug

f) 2 x 36/0.3(2.5 sq.mm.)+1x22/0.3(1.5sq.mm) as ECC+B2 from UPS Power to Computer Point.

g)2 x 36/0.3(2.5 sq.mm.)+1x22/0.3(1.5sq.mm) as ECC from DB to Area Light, Gate Light & Pump

Distn. Wiring in 22/0.3 (1.5 sq.mm.) single core stranded "FR" PVC insulated & unsheathed single core stranded copper wire (Havells make) in 19mm bore, 3mm thick polythen pipe complete will all accessories embedded in wall to light/fan/call bell points with Moduler Key type switch (Havells make) fixed on sheet metal (16 SWG) switch board with modular plate to cover flushed in wal incl. mending good damages to original finish. Av. Run 8 mtr. 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC.

Supplly & fixing of 2 row 12 modular switch board complete ( Havells make 6 A 5 pin plug-2nos , 6 A switch- 8 nos ) ( Gr FL -0, 1st FL-1 nos , 2 nd FL - 1 Nos )

Supplly & fixing of 6 modular switch board complete( Havells make 6 A 5 pin plug-1nos , 6 A switch- 4 nos ) ( Gr FL -3 nos , 1st FL-5 nos , 2 nd FL .- 10 Nos )

Supplly & fixing of 4 modular switch board complete(Havells make 6 A 5 pin plug-1nos , 6 A switch- 2 nos ) ( Gr FL -2 nos, 1st FL-9 nos , 2 nd FL .- 4 Nos )

Supply of perforated G.I. Pipe 40 mm Inner diameter (50 O/D) of 3 mtr. Long ISI marked of make (TATA / Jindal) and driven the said pipes in the soil with filling pentonite powder in the pit as per Indian Standard, approved drawing & design of WBSEDCL and direction of Supervisory Officer.

Supply & fixing Modular type RJ45 suitable for CAT-6 cable D-link on existing PVC Board and top cover plate Jon wall and making necessary connection as required.

Supply & fixing RJ45 suitable for CAT-6 cable with PVC Board and top cover plate on wall and making necessary connection (E-18/8(a).

Supply & fixing RJ45 suitable for 8 Pin scoket D-link.

Supply & fixing RJ45 8 Pin Jack.

Supply & drawing LAN Cable CAT-6 D-link in prelaid PVC rigid conduit.

Area Light fixing on Roof with necessary connection with MS Pipe Bracket.

Fixing of Gate Light with necessary connection with base plate.

Supply & fixing of LOOP Box for Area and Gate Light

Supply & fixing of A.C. Point with 25 Amp Starter with DP MCB, 16 AMP Modular Power point & socket with necessary arrangement. For S.M. Room.

NEW ERA TRADING (BID ID -5717359)

M/S. MA TARA ELECTRIC CONCERN (BID ID -5684614)

BABA LOKNATH ELECTRICAL ENTERPRISE (BID ID -5684655)

SUMAN PAL (BID ID -5684642)