REPAIRS TO PLASTERING JOINERY FLOORING TILING AND OTHER MISC ITEMS AT VARIOUS WATER SUPPLY INSTALLATIONS AT SOUTH SIDE OF BARNALA ROAD UNDER GE UTILITY BATHINDA

Amount

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as directed.

M&L for 50 mm thick PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) as plinth protection complete all as specified and directed.

M&L for 25 mm thick plain cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in floors to receive top layer complete all as specified and directed.

M&L for 40 mm thick plain cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in floors finished even and smooth using extra cement complete all as specified and directed.

S&F 3mm thick glass dividing strips and width of strip 38mm complete all as specified and directed.

M&L for 100 mm thick plain cement concrete (1:2:4) type B2 using 40 mm graded stone aggregate as in hard standing complete all as specified and directed.

Demolition of brick/stone massonry work built in cement mortar as in wall including all quoins, arches, pillars etc complete all as directed.

M&L brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L brick work with old sreviceable brick straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for brick work with subclass ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M&L for rendering 10 mm thick in cement mortar (1:3) on fair faces of ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15 mm thick in CM (1: 6) on other than fair faces of brick work surfaces and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair face of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed.

M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel brush or any other means, including filling depressions of scrapped surfaces with putty and remove vegetable/plants roots from Walls/Chajjas and preparation of surfaces for further treatment complete all as directed.

M&L for two coats of white wash to newely plastered surface of ceiling including preparation of surface complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for applying two coats of oil bound distemper white or tinted over a coat of primer on prepared surfaces of walls ecomplete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of wall including cornices, pilaster etc by brooming down or steel wire brushing, scrapping down smoke soot, mouds, moss and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for preparing old distempered surfaces of walls, by washing/rubbing down and stopping and applying one coat of distemper, oil emulsion white or tinted complete all as specified and directed.

M&L for preparing old painted surfaces of walls, Chajjas, etc by washing rubbing down and stopping and applying one coat of cement base paint white or tinted complete all as specified and directed.

M&L for complete revoval of existing treatment and applying two coats of colour wash on walls over one coat of white wash complete all as specified and directed.

M&L for preparing old painted wood and wood based surfaces of any descrition exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old painted steel and iron surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Writing letters or figure black (Roman, Italian or Indian) not exc. 30 cm high including preparation of base surfaces complete as as specified and directed.

Material and labour for brick work with sub class ‘B’ laid flat as in floor bedded and jointed in cement mortar (1:4) and pointed in cement mortar (1:3) complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L Pre cast RCC (1:1.5:3) type A-I (Using 20 mm graded broken stone aggregate ) as in cover slab etc and set in CM (1:4) including use of forms, moulds or machine mold and setting complete all as directed.

M&L for reinforced cement concrete (1:1.5.3) type A1 using 20mm graded crushed stone aggregate as in chajjas complete all as specified and directed.

Use and waste formwork to chullah hoods, chajjas,troughs, shelf and similar work etc including edges, rough finished surface of concrete all as specified and directed

M&L for TMT bars 10 mm dia and over cut to length, bent to shape as required including cranking, bending and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and directed

M&L for cement concrete (1:3:6) type C2 using 40 mm graded crushed stone aggregate as in surface channels and drains complete all as specified and directed.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed.

Excavating in trenches n exc 1.5m wide and n exc 1.5m deep and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as specified and directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D2 using 40mm graded crushed stone aggregate as in foundations and filling complete all as specified and directed

Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing rubbish off the premises complete all as directed.

M&L for Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300mmx200mm x 7 mm thick , set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps over and including 10 mm thick screed bed in CM (1:4) complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each complete all as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube in opening complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stills and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ scaled to the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement as per drawings and specifications as catered in SSR Part – II 2004

S & F 100 mm long PVC butt hinges as per approved manufacturer complete all as specified and as directed.

Supply & fix 150 mm long PTMT barrel tower bolts complete all as directed.

Supply & fix 100 mm long PTMT door handle complete all as directed.

Taking down chowkats or frames exceeding 1.5 SQM but not exceeding 4 SQM in each (without taking off shutters from the frame) complete all as directed.

Taking down shutter of any description exc 1 sqm but nexc 2 sqm each all as directed.

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.20 (b) complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood plain framed paneled shutters(any number of panels) with panels of 9 mm thick plywood for two or more panel construction and 12 mm for single panel construction, BWR conforming to IS fixed to timber frame of second class hard wood ,all stile and rail as per SSR par I complete all as specified and directed

S&F 105x60x1.25 mm pressed steel frame for doors with one or more rebates including joining cleat for fixing etc complete as specified.

S&F 125x60x1.25 mm pressed steel frame for doors with one or more rebates including joining cleat for fixing etc complete as specified.

M&L for plain cement concrete (1:3:6) type C1 using 20 mm graded crushed stone aggregate as in filling for pressed steel frame and hold fast block or bed block complete all as specified and directed.

Supply & fix MS barrel tower bolts , stove enamel black , with bright bolt of size 200 mm long complete all as directed.

Supply & fix MS pressed handle oval type stove enamel black 150 mm in size complete all as directed.

S&F 250 mm mild steel sliding door bolt stove enamelled black with bright bolt not less than 12mm dia with and incl a min of six bolts and nuts four on bolt plate and two on staple plate complete all as directed.

S&F in repair 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.50sqm in each pane complete all as specified and directed.

S&F in repair 3mm thick figured glass, pin headed type and glazing with oil putty in square not exceeding 0.50sqm in each pane complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed

S&F galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed

M&L for preparation of wood and wood based surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repair 300 mm size mild steel peg stay for steel window with screws or necessary welding complete all as specified and as directed.

S&F in repair mild steel handle for steel window with screws or necessary welding complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as directed.

Material and labour for MS framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged in to spikes, framed guard bars, barred iron doors, ladders and similar works complete all as directed

Supply and fix in repair steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as directed.

Supply and fix in repair steel ventilator with top hung shutters including hinges, steel peg stay complete all as directed.

M&L for repairing the existing rolling shutter by cleaning, greasing the roller, replacing the top worn out cover and springs, minor weldings, refixing in position the loose guide rails and by replacing the certain other minor spares to make smooth functioning the rolling shutter complete all as directed.

M&L for preparation of new steel surface over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new steel surface not exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling/ disconnecting/ demolition water storage tank of any capacity and removing from site complete all as directed.

S&F rotational moulded polyethylene water storage tank including, plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 ltrs including making connections complete all as specified and directed.

S&F ball valves high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe of dia 20mm pipes. (Minimum wt - 210 gms) complete all as specified and directed.

Removal of uprooting of roots, weeds, algeabushed, vagitation etc. and thrown away all the waste to a distance exceeding 250 metre complete all as directed.

Dismantling brick tiles in floor or in roofs laid dry and pointed in cement mortar complete all as directed.

Demolition of mud phuska roof of any thickness including platering and leeping complete all as directed.

M&L for applying evenly a tack coat of bitumen of 85/25 @ 1.2 gram per Sqm including cleaning roof surface complete all as directed.

M&L for 80 mm thick aaverage consolidated thickness mud phuska on flat roofs including 25 mm thick mud plaster and 3 mm thick leeping plaster complete all as directed.

M&L for 40 mm thick brick tiles on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight ofcement complete all as directed.

All as per serial item No. 81 above but using with old serviceable brick tiles.

M&L for 15mm thick screed bed or bedding layer in cement mortar (1: 4) for laying floor finishes complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thick ness in floors aprons etc laid beded and pointed in any mortar complete all as directed.

M&L for 75mm thick plain cement concrete (1:4:8) type D2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.

M&L for pre polished chequered cement concrete tiles area exc .08 Sqm but not exc 0.11 Sqm, 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with colour pigment to match with the tiles over and including 15 mm thick screed bed in cement mortar (1:6) all as specified and directed.

M&L for old serviceable pre polished chequered cement concrete tiles area exc .08 Sqm but not exc 0.11 Sqm, 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with colour pigment to match with the tiles over and including 15 mm thick screed bed in cement mortar (1:6) all as specified and directed.

M&L for factory made 60 mm thick machine pressed precast concrete interlocking paver block of grade M-35 confirming to IS -15658-2006 of shape and size as direted with grey cement and pigment laid over and including 50 mm thick sand cushioning, joints of blocks filled with dry sand complete all as specified and directed.

M&L for continous brick edging using old size sub class B bricks with width equal to depth of brick laid dry on end vertically (including embedddding bicks in the ground) complete all as directed.

M&L for cement concrete (1:2:4) type B2 using 40mm graded crushed stone aggregate as in copping complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section incl taking out embedded portion from the concrete and making good disturbed ground including chain link fencing complete all as directed.

Excavation in post holes in soft loose soil each not exceeding 0.5 CUM, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick, watering and removing surplus soil to a distance not exceeding 50 meter and making good surface complete all as directed

M&L for plain cement concrete (1:3:6) type C2 using 40mm graded crushed stone aggregate as in foundations and filling complete all as specified and directed.

S&F MS angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. including all necessary drilling, bolting or riveting and similar work conforming to Fe 410-O or Fe 310-O complete all as specified and directed.

Fixing only old serviceable MS angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. including all necessary drilling, bolting or riveting and similar work complete all as specified and directed.

Supply only chain link fencing wire mesh of 100 mm x 100mm size made with 3.15 mm dia GI wire complete all as specified and directed.

Fixing only chain link fencing wire mesh of any size and any type to any type of standard rails, straining bolt etc incl provision of line wires and binding wire complete all as specified and directed

M&L for MS round bars 10 mm dia and over cut to length, bent to shape as required including cranking, bending and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and directed

S&F in repair galvanized two strand, steel barbed wire 2.24mm dia barbed with 2mm dia bars at 75mm spacing and straining and fixing to RCC post etc including securing or tying at crossing with and providing of galvanized mild steel wire, staples or steel pins, etc, (each line of wire to be measured separately) complete all as specified and directed.

Fing only ix in repair galvanized two strand, steel barbed wire 2.24mm dia barbed with 2mm dia bars at 75mm spacing and straining and fixing to RCC post etc including securing or tying at crossing with and providing of galvanized mild steel wire, staples or steel pins, etc, (each line of wire to be measured separately) complete all as specified and directed.

M/s Manav Builders

M/s RAMESH KUMAR VERMA CONTRACTORS

R K GOYAL & COMPANY

NAIB ENTERPRISES

M/s PANKAJ KUMAR