Repairing Replacement of 50 HP VT PSet 20 HP CF Pump Set 25 HP CF Pump Set 40 HP CF Pump Set Supplying and Fitting 200 Amp main switch etc work of Lesliganj add joining village Rural Water Supply Scheme

Part – A (RAW WATER P/Plant Mali River at Sitadih )

Cost towards repairing and Overhauling of 50 H.P. V.T. Pump Set Multiple Stage ball assembly S/F impeller G.M. Bush as per sample 5 – Nos each, S/F Housing Bush as per Sample. Replace in spider rubber cutless bush – 5 Nos, replacing of 25mm dia. 5 feet long S.S. line shaft – 4 Nos with S.S. socket . Transportation charge from site to work shop vice versa including tools – tackles and Labour charges for lifting & lowering V.T. Pump before and after repairing work etc all complete at pumping plant.

Supplying all labour tools and tackles for complete opening, dismantling , Cleaning of its slots of stator by brush & petrol then complete rewinding of 50 H.P. 440 Volts, 50 C/S, Star delta, 3 Phase Hollow Shaft V.T. motor by supplying super enameled copper wire & binding, tapping varnishing, heating, testing on full load and repairing of stator & rotor, changing of bearings as per sample SKF make with including the deduction of cost of burnt copper wires and transportation charges from P/Plant to workshop and back to the same . Including tools & tackles and labour charges etc all complete at P/Plant.

Cost towards repairing/ Replacement of 200 Amp motor control panel board consisting of incoming feeder MCCB 200 Amp – 1 No. and outgoing feeder MCCB 100 Amp – 2 Nos, Timer – 1 No., thermal over load release relay – 2 Nos. supplying and fitting of Digital Volt meter (0-500V) squared type – 2 Nos, Ammeter (0-125Amp) squared type – 2 Nos and replacement of phase indicator lamp – 3 Nos. including internal wiring etc all complete.

Cost towards Supplying & Fitting 35 mm2 3 core copper conductor 15 mtr panel to motor.

Cost towards Supplying & Fitting 60 Watt LED Street light (JSOR-M840)

Part – B (CLEAR WATER Lesliganj.)

Cost towards repairing/ Replacement of 200 Amp motor control panel board consisting of incoming feeder MCCB 200 Amp – 1 No. and outgoing feeder MCCB 100 Amp – 3 Nos, Timer – 1 No., thermal over load release relay – 3 Nos. supplying and fitting of Digital Volt meter (0-500V) squared type – 2 Nos, Ammeter (0-125Amp) squared type – 2 Nos and replacement of phase indicator lamp – 3 Nos. including internal wiring etc all complete.

Supplying all labour tools and tackles for complete opening, dismantling , Cleaning of its slots of stator by brush & petrol then complete rewinding of 20 H.P. 440 Volts, 50 C/S, Star delta, 3 Phase induction motor by supplying super enameled copper wire & then tapping varnishing, heating & testing on full load and repairing of stator & rotor, changing of bearings as per sample SKF make with including the deduction of cost of burnt copper wires and transportation charges from P/Plant to workshop and back to the same . Including tools & tackles and labour charges etc all complete at P/Plant.

Cost for repairing of 20 H.P. C/F pump with M/S/F S.S. shaft as per sample – 1 No. C.I. Gland Tightner – 2 Nos, C.I. Bearing housing – 2 Nos, MS. Check Nut – 2 Nos, C.I. Neckring – 2 Nos, Ball Bearing S.K.F. as per sample – 2 Nos, all labour tools & tackles and materials with loading and unloading transporting charge from site to workshop & vice versa.