P/L interlocking paver blockes from Jubbal Road to Town hall in Ward No.-07 NP Kotkhai

Amount

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 metres. Ordinary rock

Stone soiling properly handpacked filling interstices with Kharanja stone and consolidated with power road roller to the requested gradient and camber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HPPWD specificationd .100 mm spread thickness (finished work including materials and labour)

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement : 2 coarse sand): 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:1.5:3 (1 Cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required . In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge. 60 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.

ANSHUL RAMDAIK

himanshu

PRATYUSH JUSTA

SHUBHAM CHAUHAN

DEEPAK DHARMAIK

Gian Chand