Repair/maint of DG Sets, Transformer, Pumps, ACs, Geysers, Fan, Desert Cooler, Pannels and RO plants at LOAR and SF accn Dwarka, New Delhi

M & L for maintenance and servicing of 250 KVA DG set (Make-Cummins) complete including draining out of diesel, draining out engine oil from the sump, flushing the sump and cleaning, replacement of gaskets, fuel filters, oil filters, engine oil,air cleaner elements and the worn out parts like fuel flexible pipes, nuts, bolts, fuel line etc as required, filling the starting batteries with electrolyte, applying petroleum jelly in battery terminals poles, checking of voltage, amps, fuel, coolant and exhaust leakages etc including refilling radiator coolant , tightening all the nuts and bolts to the required torque incl testing to the entire satisfaction in all respect as per directed by Engr-In-Charge.

M&L for repair, maint and servicing to Diesel Engine 125 KVA, 6 cylinder, 1500 RPM prime mover directly coupled with 50 HP Jokey pump for fire fighting services installed at SF accn including dismantling components cleaning ,servicing replacing fuel filters ,lub oil filters ,engine oil of recommended grade including checking servicing of fuel injection pump, technically inspect thge all mechanical and electrical parts and rectify the defects if required, re assembling all the components to its original position and servicing & maint of Jokey pump with testing and commissioning to entire satisfaction for smooth functioning in all complete as per directed by Engr-in-Charge

M&L for maint & servicing of 750 KVA dry power distribution transformer, 11/0.433 KV indoor type including taking out the top cover assembly with gaskets and inspect/ technical checking the windings, loose connections, condition of tap changers, gas level upto required mark terminal boards and cleaning the all dust, dirt or residues on windings or insulators through air compressor / vacuum cleaner. Cleaning the lead supports, tap changers and terminal boards through brushes/wiped with dry lint-free cloth. Technically checking the all HT & LT bushes, loose connection and rectify the defect if required .Checking the HT & LT cable jointing kit, replace the same if required. Charging of transformer and testing to entire satisfaction in all as directed by Engr In Charge.

M&L for repair & maint of 7.5 HP monoblock pump set including decoupling pump & motor, opening the body of motor and technically inspect , taking out burnt/defective winding wire carefully without damaging the stator, cleaning the slot, rewinding the stator with super enameled copper winding wire of existing gauge along with insulating material & varnishing if required and cleaning and servicing of impeller of pump, replace of bearings and greasing,gland packing with bushing if required in all complete to the entire satisfaction and smooth functioning as directed by Engr In Charge.

M&L for repair & maint of 5 HP monoblock pump set including decoupling pump & motor, opening the body of motor and technically inspect , taking out burnt/defective winding wire carefully without damaging the stator, cleaning the slot, rewinding the stator with super enameled copper winding wire of existing gauge along with insulating material & varnishing if required and cleaning and servicing of impeller of pump, replace of bearings and greasing,gland packing with bushing if required in all complete to the entire satisfaction and smooth functioning as directed by Engr In Charge.

M&L for repair & maint of 2.5 HP monoblock pump set including decoupling pump & motor, opening the body of motor and technically inspect , taking out burnt/defective winding wire carefully without damaging the stator, cleaning the slot, rewinding the stator with super enameled copper winding wire of existing gauge along with insulating material & varnishing if required and cleaning and servicing of impeller of pump, replace of bearings and greasing,gland packing with bushing if required in all complete to entire the satisfaction and smooth functioning as directed by Engr In Charge.

M&L for AMC of 1000 LPH RO Plant including servicing of raw water pump and high pressure pump ,rewinding of motor if required, servicing & maint of membranes , replace of high pressure switch ,low pressure switch and flow meter if required. Replace of filters and water purify chemicals required for smooth functioning of Plant etc in all complete as per directed by Engr-In-Charge.

M&L for AMC of 500 LPH RO Plant including servicing of raw water pump and high pressure pump ,rewinding of motor if required, servicing & maint of membranes, replace of high pressure switch ,low pressure switch and flow meter if required. Replace of filters and water purify chemicals required for smooth functioning of Plant etc in all complete as per directed by Engr-In-Charge.

M & L for repair,maintenance and servicing of 125 KVA DG set (Make-Kirloskar) complete including draining out of diesel, draining out engine oil from the sump, flushing the sump and cleaning, replacement of gaskets, fuel filters, oil filters, engine oil, air cleaner elements and the worn out parts like fuel flexible pipes, nuts, bolts, fuel line etc. Technically inspect and proper maint and servicing of all mechanical and electrical parts ie piston head, FIP assembly, self starting assembly, AVR, Engine and alternator coupling, control panel, filling the starting batteries with electrolyte, applying petroleum jelly in battery terminals poles, checking of voltage, amps, fuel, coolant and exhaust leakages etc including refilling radiator coolant , tightening all the nuts and bolts to the required torque, painting of DG Set with minor repair of equistic enclosure and testing to the entire satisfaction for smooth function in all respect as per directed by Engr-In-Charge.

Maint & servicing of 200 KVA power distribution transformer, 11/0.433 KV out door type, oil cooled including taking out the sample of transformer oil for checking the dielectric strength and top up of transformer oil as required ,taking all safety precautions so as to achieve dielectric strength not less 36 to 40 KV per minute rupturing capacity and switch on supply . Technically inspect of all bushing with guskets LT and HT side, replace the same if required, replace of silica jel on transformer breather, charging the transformer to entire satisfaction in all as directed by Engr-In-Charge.