Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.9 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹39.9 L+₹1.5 L (3.86%)Rejected-AOC 301 CHAMUNDA ENCLAVE PLOT NO 89 AIROLI SECTOR 8A NAVI MUMBAI 400 708 | THANE | MAHARASHTRA | 400708 | L2 | Rejected-AOC Rejected being L2 | |
| 3 | L3₹40.1 L+₹1.7 L (4.49%)Rejected-AOC | L3 | Rejected-AOC Rejected being L3 | |
| 4 | L4₹40.4 L+₹2.0 L (5.27%)Rejected-AOC | L4 | Rejected-AOC Rejected being L4 | |
| 5 | L5₹40.7 L+₹2.3 L (6.08%)Rejected-AOC | L5 | Rejected-AOC Rejected being L5 |
Tender Value
₹36.9 L
EMD Value
₹73,900
Closing Date
10 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 867 EWS
GE 867 EWS PIN-913867 C/O 99 APO
PROVN OF STORE ROOM FOR BQM OFFICE AND CERTAIN REVENUE WORKS AT KALIMPONG UNDER GE 867 EWS
2022_MES_562494_2
GE/867/TOKEN/25 OF 2022-2023
Open Tender
Civil Works
Item Wise
180 days
KALIMPONG
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE 867 EWS
₹73,900
27 Jan 2023
23 Dec 2022
12 Jan 2023
23 Dec 2022
10 Jan 2023
31 Dec 2022
23 Dec 2022 - 29 Dec 2022
Amount
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in solf loose soil all as specified and directed by Engr-in- Charge.
Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for foundation etc. and getting out in Sof t/ loose soil all as specified and directed by Engr-in- Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and directed by Engr-in- Charge.
Excavating in post holes each n exc 0.5 Cum getting out, in soft soil,returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to ad distance n exc 50m and making good surface complete all as specified and directed by Engr-in- Charge.
Spreading & levelling in layers n exc. 25 cm thick and ramming including watering as required all as specified and directed.
M&L for Minimum 25mm thick sand filling under floor or in foundation including water and consolidation complete all as specified and directed.
M&L for Removing excavated soils n.exc50m and depositing where directed at a level n.exc 1.5mabove the starting point all as specified and directed by Engr-in- Charge.
M & L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed by Engr-in- Charge.
M&L hard core of gauge exc. 63mm but n.exc. 100mm deposited spread and levelled in layers n.exc. 15cm thick water and rammed etc complete all as specified and directed.
M&L for 50mm thick Cement concrete type B-1, (1:2:4) (20mm graded stone aggregate) as in floor complete all as specified and directed
M&L for PCC (1:3:6) type C2 (using 40mm graded aggregate) as in foundations, filling and mass concret all as specified and directed by Engr-in- Charge.
M & L PCC (1:4:8) type D-2 (Using 40 mm grade stone aggregate) in foundation, filling and mass concrete all as specified and directed by Engr-in- Charge.
M&L for PCC (1:3:6) Type C-2 as in surface channels and drains complete all as specified all as specified and directed by Engr-in- Charge.
M&L for PCC (1:3:6) type B-1 (using 20 mm graded crushed stone aggregate) as in bed blocks for grouting hold fasts , coping, filling in pressed steel chowkat or similar work including necessary form work as required complete all as specified and directed.
M&L for pre-cast cement concrete (1:3:6) type C1, (using 20mm graded stone aggregates) as in block masonry with solid blocks, exc. 10 cm in width and setting in mortar (1:6), complete all as specified and directed
M & L RCC Type B1 (1:2:4) (20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed by Engr-in- Charge.
Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete with using extra cement incl. forms moulds, mitred / stoped ends all as specified and directed by Engr-in- Charge.
Supply only integral water proofing compond all as specified and as directed.
M & L for 40mm thick Damp proof course type B-0, (1:2:4) (40mm graded stone aggregate) to horizontal or vertical surfaces including necessary formwork all as specified and directed by Engr-in- Charge.
Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase raillings and similar work including attached pillasters, buttresses, ect; vertical or to batter finished the surface fair all as specified and directed by Engr-in- Charge.
M & L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;(on flat surface) not exceeding 200mm thick (Horizontal or sloping all as specified and directed by Engr-in- Charge.
M & L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;(on flat surface) exceeding 200mm thick (Horizontal or sloping all as specified and directed by Engr-in- Charge.
M & L Formwork to edges of concrete flats,(on flat surface) breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and opening complete all as specified
S&F 35 mm thick, 2nd class hard wood (batten thickness) Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed by Engr-in- Charge.
S&F 30 mm thick (batten thickness) second class hard wood , plain, framed panelled shutters (any number of panels), with panels of 12 mm thick timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density wood particle board with commercial face veneers complete all as specified and directed. (Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I)
S&F PVC insulation panel with EPS stuck 1 mm printed PVC sheet used in lieu of plain PVC sheet sheet suitably placed in existing/ new false ceiling grid made of Aluminum /G.I/M.S/wooden with thickness of PVC insulation panel 10 mm complete all as specified and as directed. Note:- New false ceiling grid of aluminium/GI/MS/wooden if provided shall be measured and paid separately.
S&F of 150 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed all as specified and directed.
S&F of 300 mm long aluminium alloy, anodised sliding door bolts with haps staple(bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed complete all as specified and directed.
S&F 125 mm size Aluminium handles, cast type, anodised and fixed all as specified and directed.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed by Engr-in-Charge
M & L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed by Engr-in- Charge.
S&F of TMT bars 6 mm to 8 mm dia, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
S & F Steel work in tubular/ RHS/SHS in trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.11611979/4923 ( 1997) grade St.-240 all as specified and directed by Engr-in- Charge.
S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.
S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified.
S&F pressed steel frame of size 125 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc complete all as specified and directed.
S&F GI frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based steel sheet of approved profile of corrugation, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed by Engr-in-Charge.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws all as specified and directed by Engr-in-Charge.
M&L for 75 mm thick PCC (1:3:6) type C-2 (using 40mm graded crushed stone agg) as in plinth protection/ path laid slope of 1 in 12 and finshing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges or all as specified and directed by Engr-in-Charge.
M & L for Cement concrete 75mm in sub base type D-2 (1:4:8) (40mm graded stone aggregate) all as specified and directed by Engr-in- Charge.
M&L for 100mm thick cement concrete type D- 2, (1:4:8) using 40mm graded stone aggregates as in sub base complete all as specified and directed
M&L for Machine pressed precast concrete interlocking paver block, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade, with grey cement and no pigment complete all as specified and directed.
M/L polished chequered cement concrete tiles with grey cement and pigment 25cmX25cm X 25mm thick set jointed and pointed in neat cement slurry over 15mm thick scared bedding layer in CM (1:6) all as specified and directed by Engr-in- Charge.
M&L for coloured & polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry complete all as specified and directed by Engr - in - Charge.
M&L 15mm thick rendering on fair faces of brick work or concrete surface in CM (1:4) finished even and smooth without using extra cement all as specified and directed by Engr-in- Charge.
M&L for 15 mm thick rendering in cement mortar (1:6) on stone masonry surfaces or surfaces other than fair faces of brick work, rendering finished even and smooth (without using extra cement) complete complete all as specified and directed.
M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:4) on external wall finished even and fair mixed with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer and in the proportions indicated all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.
M & L for screed bed or bedding layer in Cement Mortar (1 : 6) of 20mm thick for laying floor finishes complete all as specified and directed by Engr - in- Charge.
M&L preparation of new plastered or unplastered surfaces of walls, applying 1mm thick plaster of paris and applying two coats of oil emulsion distemper over a coat of primer coat Chalk whiting, on plastered surfaces, prepara-tory to distempering on walls complete all as specified and directed.
M&L for preparation of surfaces and applying three coats of white wash on newly plastered wall surfaces.
M&L for preparation on newly plastered / previously untreated surfaces of wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including 3mm thick wall care putty on wall complete all as specified and directed.
M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 20mm thick screed bed or bedding layer in CM (1:6) complete
All as per item ser No 53 here-in before but on vertical surfaces such skirting/ dados etc including 15mm thick rendering in CM (1:4), screed and jointed with all as specified and directed by Engr-in-Charge
S & f Sheet glass 3mm, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane
M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, 100mm Thickness of concrete slab in mm, Grade ‘A’
Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A'
S&F Metal Crash Barriers (W-Beam) in two layers single side guard rail comprising of 3mm cold rolled section having minimum yield strength 2400 kg/Sqm cm having width of 312/510mm and depth of corrugation as 83mm with hot dip Galvanised of Sinc coating @ 550g/Sqm having total length 4.318 mtr (Effective length 4.0 mtr) incl three Nos of vertical post of size 150mmx75mmx5mm thick and length 1800mm each incl necessary spacers and nut bolts complete all as specified in MORTH specification.
Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit not less than 20mm size, medium grade with all necessary fittings, concealed wiring , for light / E/fan/Bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes (concealed type in permanent bldg and surface in temporary bldg or as directed ) for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover ,for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion.
All as per item No 61 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on independent board.
All as per item No 63 here-in-before but One 3 pin socket outlet 5 Amps on the same board with other switchs with cables 1.5 Sqmm size.
Supply and fix switch piano flush button, single pole, 5 amps, one way all as specified and as directed.
Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed.
Supply and fix switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5 amps flush type all as specified and as directed.
S & F Energy efficient LED tube light fitting 4", 1x22 watt, with bipin holders, connector block, CCT - 6500K, system output lumen not less than 2000lm, extruded aluminium housing with high quality Polycabonate diffuser, wide voltage protection range 140V-270V including connecting up with PVC insulated 3 core sheathed 0.5 sqmm copper conductor two numbers PVC mounting blocks for fixing of fitting complete all as specified and as directed by Engineer-in-charge. Make : Philips, Model - TMC 501, TMC 501P 1XT-LED 22W P3241 or equivalent in Crompton/Havells.
Supply and fixing lamp holder insulated body with back plate for batten fitting all as specified and as directed.
S & F in LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink of 5 W complete with tube rod all as specified and directed.
Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 4 way 240 Volts AC all as specified and directed by Engr-in- Charge. Make- Legrand/Siemens/Schindler.
Supply and fixing MCB Single pole and neutral upto 32 Amps capacity 10 KA 240 Volts 50 HZ. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, Cat part no 4086 17 of Legrand or equivalent in Siemens/Schindler all as specified and directed by Engr-in- Charge..
Supply and fix MCB/Isolator single pole (SP), 10 kA of 6 Amps to 32 Amps capacity 240 Volts. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, Cat part no 4085 87,90,92,93,94,95 of Legrand or equivalent in Siemens/Schinder all as specified and directed by Engr-in- Charge..
Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable circular, stranded cable of size 4 sqmm complete all as specified and directed by Engr-in-Charge.
Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.
S K ENTERPRISES
HEM RAJ GURUNG
G K SUTHAR
PRASAD PRADHAN AND SON
MS BRAHMA CONSTRUCTION
RAJU TAMANG
MS MAYA PRAKASH GOEL AND SONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .