PROVISION OF OPEN TREATMENT SHED AT VETERNARY HOSPITAL AND RWH WITH CONNECTED WORKS AT GANAPATI ENCLAVE UNDER GE CENTRAL BANGALORE

Amount

M & L for surface excavation averaging 15cm deep and n.exc 30cm deep and getting out as in soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation, etc area not exceeding 10 Sqm on plan and getting out in any type of soil (ie combination of hard/dense and soft soil) complete all as specified and directed.

All as per item No 2 above but exceeding 1.5 metre depth and not exceeding 3.0 metre deep.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed.

Removing excavated material to a distance not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

M&L for Brick work using locally available first class bricks sub class 'B' bricks (old size brick), straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Loose filling with brocken brick bats/aggregates of gauge 80 to 150mm in soakage pit, soakage well all as directed complete.

All same as per item No 07 above but gauge 40 to 80mm.

M & L for Hardcore of broken/crushed stone aggregate of gauge n.exc 63 mm deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for precast cement concrete block masonry type C1, 1:3:6 (20 mm graded granite stone aggregate) with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M & L for Plain cement concrete 1:2:4, type B-1, (using 20 mm graded stone aggregate) as in coping, kneelers, bed plates etc including weathering slightly rounded or chamfered angles including necessary form work finished fair the top surfaces using extra cement complete all as specified and directed.

M & L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed.

M & L for Precast Reinforced Cement Concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in cover slab of drain, etc and set in cement mortar 1:4 including necessary form work, moulds, etc complete all as specified and directed by the Engr-in-Charge. (Note : Reinforcement shall be measured and paid separately)

M & L for 75mm thick Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub-base of floor, etc complete all as specified and directed.

M & L for 40mm thick Plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in sub-base/ level course in floor, etc complete all as specified and directed.

M & L for terrazo tiles with bullnosed edge 30cmX20cmX40mm thick, with grey cement anf pigment, set, jointed and pointed in grey neat cement slurry as in floors, treads, cuts/grinding, polished including providing 20mm thick screed bed in cement mortar 1:4 complete all as directed.

M & L for precast chequered cement concrete tiles with grey cement and pigment of size 30cm x 30cm x 25mm thick, as in floors etc, including 15 mm thick screed bed in cement mortar 1:4 and set & jointed in neat cement slurry and pointed in grey cement and pigments to match with the shade of tiles complete all as specified and directed.

S & F box type powder coated steel windows/ventilators double side shutters ie glass and wire mesh shutter, including pressed steel frames made out of CRCA sheet of 80X60X1.25mm thick double rebated, shutters box type made out of CRCA sheet of 40X20X1.0mm thick, 12mm square guard bar/grill welded to steel frame, window shutters side hung, ventilator shutters top hung, box type hinges, aluminium die cast handles for glass shutters, iron flat type handles for mesh shutters, telescopic stays etc complete all as specified in TD drawing No TD/539 dated 09.02.2004 of Chief Engineer Chennai Zone and as directed. NOTE:- (i) Qouted rate under this item shall deemed to be inclusive of steel frame, both side steel shutters, guard bars/grills, handles, stays, beading/fillets for fixing glass/wire mesh including cost elements for fixing of glass & wire mesh and mearurement/ pament shall be considered as one unit by comprising all these elements. (ii) Glass and wire mesh shall be measured and paid as supply only underseparately under respective item.

Supply only stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and fillets complete all as directed.

Supply only 4 mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

M & L for moorum/sand/red bajri filling under floors or in foundations laid in layers n exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M & L for Reinforced Cement Concrete M-25 design mix as in foundation, footings foundation beams, plinth beams etc complete all as specified and directed.

M & L for Reinforced Cement Concrete M-25 design mix as in columns, pillars, piers, post and struts etc complete all as specified and directed.

M & L for Reinforced Cement Concrete M-25 design mix as in beams, cantilevers, lintel beam etc complete all as specified and directed.

M & L for Reinforced Cement Concrete M-25 design mix as in slabs supported on walls, beams and column in floors, roofs, landings, balconies and in shelves and the like complete all as specified and directed.

M & L for use & waste Form work to sides of concrete foundations, footings, raft beams, sides and soffits of plinth beams and the similar works for flat rough finished surfaces of concrete complete all as specified and directed.

M & L for use & waste Form work to sides of concrete columns, pillars, piers, post and struts and the similar works for flat rough finished surfaces of concrete complete all as specified and directed.

M & L for use & waste Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings, balconies and in shelves and the like for flat rough finished surfaces of concrete complete all as specified and directed.

M & L for use & waste Form work to soffits and sides of beams, lintel beam for flat rough finished surfaces of concrete complete all as specified and directed.

M & L for use & waste Form work to sides/edges of concrete flats, floor and roofs, in walls, horizontal or slopeing and the similar work, 10cm to 20cm wide for rough finished surfaces of concrete complete all as specified and directed.

S & F TMT steel bars 10mm dia and over, cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S & F TMT steel bars 6 to 8mm dia, cut to length, bend to shape required, including cranking, bending spirally as in tie/stirrups of columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S & F TMT steel bars 6 to 8mm dia, cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S & F Rolled mild steel work as in trusses,purlins, posts etc using Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc including cutting, welding complete. Steel section conforming to Fe-410-W (Gde-E-250) quality-B complete all as specified and directed.

M & L for Mild steel framed work such as grills, gratings, door, gates etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M & L for mild steel plain black sheet 1.25 mm thick as in wall cladding, steel gates and the similar works, cut to size, punched, making holes, including round headed screws, clout nails or revets, fixed to wooden frame or welded to steel frame with 40mm lap joints, bending, turning up, mitred angles etc as required complete all as directed.

S & F aluminium anodised coloured powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows and ventilators with one or more rebates including jointing cleats for fixing etc including taking down old unserviceable frame.

S&F aluminium anodised coloured powder coated (minimum thickness of powder coating 50 micron) fixed/sliding type window/ventilators, aluminium sections weighing not less than 0.50kg per metre, all are made of from aluminium anodised section including necessary track, jointing cleat, glazing clips, rubber packing anodised aluminium snap beading, screws of suitable size and stainless steel wire cloth, locking arrangement, etc complete all as specified and directed by the Engr-in-Charge including taking down existing unserviceable shutters.

S & F 4.8 mm thick, sheet glass, ordinary quality and glazing with oil putty/timber beads in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F for aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed

S & F second class hard wood fillets, wrought, square rectangular or triangular in section secured with nails, cross sectional area exc 6 and not exc 13 sqcm etc including two coat of painting using synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & Fin repair 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work, complete, as specified and directed

M & L for Plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in benching including finished the top surfaces even and smooth using extra cement complete all as specified and directed.

M & L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection laid in proper slope/gradient etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed.

S & F continuous (Piano) hinges, mild steel bright finished or electro galvanised, width of flaps 30mm when open complete all as directed.

S & F 40mm dia MS cupboard knobs, brass polished, bright finish, fixed with nut, screws and washer complete all as directed.

S & F magnetic catch for drawer of suitable size comlete all as directed by the Eng-in-charge.

S&F rotational moulded polyethylene water storage tanks 2000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm dia brass ball/float valve high pressure with polythene float and flynut, 20 mm water tank nipple suitable for HDPE water tank, 20mm bore gun metal gate/globe valve with iron wheel head complete all as specified and directed.

M & L for rendering 10 mm thick in cement mortar 1:6 on other than fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick in two layer (10mm + 5mm thick) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with water proofing compound at top 5mm thick layer by weight of cement as per manufacturer's instructions and finished the surface even and smooth without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

M & L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

"Supply only" liquid water proofing compound complete all as specified and directed. (Make : Dr FIXIT/Fosroc/choksey)

M & L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

Supply, laying, connection and testing, 15mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixtures complete to walls and ceilings or laid in floors, etc complete all as specified and directed.

Supply, laying, connection and testing, 20mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixtures complete to walls and ceilings or laid in floors, etc complete all as specified and directed.

Supply, laying, connection and testing, 25mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixtures complete to walls and ceilings or laid in floors, etc complete all as specified and directed.

Supply and fixing RCC pipe, 300mm bore, class NP-3, laid and jointed with collar complete all as directed.

M & L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggragate) as in bed to drain pipes including packing under and against the sides of pipes after they are laid and tested complete for 150 mm bore RCC drain pipes complete all as specified and directed.

S & F precast RCC collar rings, class NP- 3, 1.20 metre dia of 50mm wall thickness, each ring of height minimum 30cm and maximum 45cm having weep holes from the sides of the ring, set and jointed in cement mortar 1:1, laying vertically, in trenches of any depth all as directed.

S&F in repair 110 mm dia UPVC (SWR) pipes single socketed,in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed.

S&F in repair 110 mm dia UPVC (SWR) pipes single socketed,in any length with rubber ring jointsfixed to walls complete all as specified and directed.

S&F in repair 75 mm dia UPVC (SWR) pipes single socketed,in any length with rubber ring jointsfixed to walls complete all as specified and directed.

S&F UPVC (SWR) bends 75 mm with access door complete all as specified and directed.

S&F UPVC (SWR) bends 110 mm with access door complete all as specified and directed.

S&F in repair PTMT gratings, circular type, 140mm dia fixed with white cement complete all as directed. (Minimum weight 50 gms)

S&F UPVC (SWR) junction single,(single T) 110 mm with access door complete all as specified and directed.

S&F UPVC (SWR) branch piece, single,(single Y) 110 mm with access door complete all as specified and directed.

M & L for Point wiring concealed type, with 1.5 Sqmm (nominal area), FRLS PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including providing PVC conduit 'medium grade' with all fittings and accessories (like Tee, bend etc.) complete in walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point and earth dolly including MS/PVC terminal box with 3mm thick masonite laminated sheet top cover fixed on wall with suitable sizes cadmium plated iron screws and washers etc.for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and directed. Note:- Cost elements for cutting chases to wall etc and making good using cement mortar 1:3 shall deemed to be included in quoted rate.

All as per item No 70 above but for one 3 pin socket outlet, 5 Amps on Independent board complete all as specified and directed.

All as per item No. 70 here in before but wiring with cables of size 4.0 sqmm for wiring & cables of size 4.0 sqmm both (FRLS) as continuous earth wire for one 15 Amps, 3 pin Switch/Socket outlet on Independent board complete all as specified and directed.

S & F switch piano, 5 Amp, single pole, flush type one way 230 volts complete all as specified and as directed.

S & F Ceiling rose, 3 phase/PVC/polycarbonate (bearing ISI marked), isolated body including providing PVC square/round block complete all as specified and directed.

S & F Switch socket combination, 2 in 1, 5 Amps (bearing ISI marked), flush type, 240 volts complete all as specified and directed.

S & F Stepped type(five steps) electronic fan regulator flush type complete all as specified and directed. (Make: Anchor, Model No. 14502 or equivalent make as per list of manufacturer)

Supply and Fixing exhaust fan, 300mm sweep, AC single phase 230/240 Volt including louver cut to fit with hole for exhaust fan complete all as directed.

Supply & Fixing energy saving ceiling fan 1200mm sweep (white) with all accessories and hanging the ceiling fan from fan hook with 3 core flexible copper wire 24/0.20 sqmm from ceiling rose, etc all as directed. Make : Model ES-50 of Havells or equivalent in Usha/Orient.

Supply and Fixing water heater/gyeser, storage vertical type, any colour, 25 Litre capacity, BEE 5 star rated including suitable PVC connection pipes for hot and cold water complete all as directed. Make : HAVELLS, model No: MONZA EC or equivelent of make Bajaj/

S & F Factory made distribution board (DB), Double Door in sheet steel enclosure fitted with common bus bar neutral link, earth bar and din rail, SPN, 4 way, 240 Volts IP-43, IK -09, suitable for housing MCB's complete all as specified and directed.

S & F MCB, SPN, 240 Volts, 63 Amps, 'C' Series, 10KA breaking capacity complete all as specified and directed.

S & F MCB, 'C' Series, SP, 240 Volts, 6 to 32 Amps, 'C' Series, 10KA breaking capacity complete all as specified and directed.

M & L concealed sub main wiring with two runs of 4 sqmm (Nominal area) single core cable FRLSH PVC insulated, multistranded, unsheathed, copper conductor cables 1100 Volts grade drawn through PVC conduits of suitable size, fixed to wall/ceiling etc including 2.5 sqmm (nominal area) single core, FRLSH PVC insulated, multistranded, unsheathed, copper conductor as earth wire and duly connected to common earth point including cutting chases to wall surfaces and making good using cement mortar 1:4 finished the surfaces to match with existing complete all as specified and as directed by Engineer-in-charge. (Note : PVC Conduits, two run cables and one run of earth wire will be measured as one length.)

S&F LED tube light fitting of 20 watts 6000K , 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. Make : Shakti/Crompton Greaves/Bajaj

S&F energy saving environmental friendly long life, with high power LED building security light 1x 40 Watt LED pressure die-cast aluminium, heat resistant, toughened glass diffuser, IP65/66 and wired with all accessories and including bracket made out of 40 mm bore GI pipe 'Light grade', 1.50 M long made to required shape, fixed to wall and connection up with 3 core flexible copper conductor cable 4/20 mm size, 1.5m long and testing on installation all as specified and directed. Make: - Havells Endura pearl Noe Model No Or equivelent of make Shakti/Bajaj/phillips/CG

S & F 15 mm bore, bib taps, cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F 15 mm bore, stop/angle valves, cast copper alloy with crutch or butterfly handle , screwed down, screwed both ends for iron pipe or for union/brass ferrule complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm

S&F Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified & directed by Engineer-in-charge.

S & F 20 mm bore, gun metal gate valve, with iron wheel head, screwed both ends, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F 25 mm bore, gun metal gate valve, with iron wheel head, screwed both ends, screwed for iron pipe or for brass ferrule complete all as specified and directed.

M & L for cutting existing GI pipe distribution for branch connection, threading, inserting GI fittings ie socket, nipple, union, Tee etc of 25/20mm bore pipe complete including all fittings/specials as required and directed.

Supply and laying cable UG XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10.00 Sqmm 2 core including alumunium lugs etc for connecting and taking out old one complete all as specified and directed. (Note: Excvation and earth work shall be measured and paid seperately)

Supply and laying well burnt bricks, sub class 'B' bricks laid breath wise across the length of cable in trenches for protection of UG cables complete all as specified and directed.

M & L for Sand cushioning and covering with clean dry sand in trenches for protection of under ground cables (below, above and around the cable laid in trenches) complete all as specified and directed. (Note: Thickness after punning down shall be measured for payment)

M & L for providing trenchless bore using mechanical pneumatic drilling equipment for passing electric cables through galvanised iron 50 to 80mm bore pipe under bitumenous/WBM/PCC path or hardstanding,at a depth not less than 1.0 metre and upto 1.50 metre including making good to disturbed surfaces to match with existing complete all as directed by Eng-in-charge. Note :- All the tools and equipments as necessary to drill and passing the pipe shall deemed to be inclusive in the quoted rate.

Supply, laying, 50mm bore, Steel water tubing, galvanised, light grade with all fittings and fixtures for cable protection on road/drain/floor or for hangging ceiling fan etc including providing MS clamp, bolt, nuts complete all as specified and directed.

M & L for additional or alteration to existing pannel and providing 01 MCB SPN, 63 Amp, 10 Ka capacity including sheet metal enclosure and other accessories complete.

S & F ABE plastic air curtain, 230 volts, suitable for upto 1.20 metre door size, testing on completion complete all as directed.

M & L Earthing complete with Galvanised steel earth plate electrode 600 mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers protected by 15mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, pre-cast RCC 1:2:4 type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT steel bars @15cm centre to centre in both direction and 10mm dia MS handle of suitable size, charcoal or coke and salt in alternative layers,necessary earth work in soft/loose soil all as shown in Electrical Plate No 3 of MES Schedule Part I and testing complete inclduing taking down old one as specified and as directed.

SHREE BANASHANKARI ASSOCIATES

M/S Bhagyawanticonstruction