SPECIAL REPAIR REPLACEMENT OF SEWAGE LINES IN CERTAIN SMQ, OMQ AND OTM ACCN AT AF STN NAL

Amount

Excavation in trenches, n. exc. 1.5 m wide and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Excavation over areas, not exceeding 1.5 m in depth and getting out in Soft / loose soil complete all as specified and directed.

Excavation over areas, exceeding 1.5 m but n exc 3.00 m in depth and getting out in soft/loose soil complete all as specified and directed.

Excavation over areas, exceeding 3 m but n exc 4.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Excavation over areas, exceeding 4.5 m but n exc 6 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25 cm. in soft/loose soil complete all as specified and directed.

Removing excavated soil to a distance exceeding 500 m but not exceeding 1.5 km and depoditing where directed complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.

Demolition of cement concrete unreinforced of any description and in any position complete all as specified and directed.

Material and labour for providing PCC 1:4:8 type D2 using (40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.

Demolition of Brick masonry built in cement mortar and removing debris off the land upto 50m distance complete all as specified and as directed by Engr-In-Charge .

Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

Material and labour for brickwork with subclass ‘B’ bricks in one brick thick, honey comb walling built in CM 1:4 complete all as specified and directed.

Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-2 using 20mm graded stone aggregate as in coping etc., including weathering, slightly rounded or chamfered and throating with necessary form works complete all as specified and directed.

Material and labour PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in surface channel, drains, benching and finishing the surface even and smooth using extra cement including necessry use and waste of formwork complete all as specified and directed.

Material and labour for rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement mixed with water proofing compound as per manufacturer's instructions complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.

Material and labour for rendering 10mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces finished even and fair without using extra cement mixed with water proofing compund as per manufacturer's instructions complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately.

Supply only integral water porrfing compound (ISI marked) complete all as specified and directed.

Demolition and breaking up drain pipes 200mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed by Engr-in-Charge.

Demolition and breaking up drain pipes 150mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed by Engr-in-Charge.

Demolition and breaking up drain pipes 100mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed by Engr-in-Charge.

Supply and fixing 200mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointed complete all as specified and directed by Engr-in-Charge.

Supply and fixing 150mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointed complete all as specified and directed by Engr-in-Charge.

Supply and fixing 100mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointed complete all as specified and directed by Engr-in-Charge.

Material and labour for PCC 1:4:8 type D-2 using 40mm graded stone aggregate Concrete bed to drain pipes including packing under, and haunching against the sides of 200mm dia pipes after they are laid and tested; in complete all as specified and directed.

Material and labour, PCC 1:4:8 type D-2 using 40mm graded stone aggregate Concrete bed to drain pipes including packing under, and haunching against the sides of 150mm dia pipes after they are laid and tested; in complete all as specified and directed.

Material and labour, PCC 1:4:8 type D-2 using 40mm graded stone aggregate Concrete bed to drain pipes including packing under, and haunching against the sides of 100mm dia pipes after they are laid and tested; in complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Material and labour for providing precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in CM (1:6) complete all as specified and directed. Note : Reinforcement shall be measured and paid separately.

Material and labour for Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour for Mild steel TMT bars 8mm dia and over upto and including 10mm dia as in stirrups, spacers, binders and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour for RCC 1:2:4 (type B1 using 20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for RCC 1:2:4 (type B1 using 20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

Supply and fixing 100mm dia Asbestos cement socketed rain water pipes with cement joints without ears complete all as specified and directed.

Supply and fixing 100mm dia Asbestos cement slotted vent cowl complete all as specified and directed.

Supply only Broken brick coarse aggregate/bats exc. 63 mm size complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 100 mm bore pipes, complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150 mm bore pipes, complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 200 mm bore pipes, complete all as specified and directed.

Cleaning of drain pipes upto 200 mm dia by rodding from manholes by mechanically or manually all as specified and cleaning eye incl well flushing and placing back manholes covers after cleaning complete all as specified and directed.

Desilting of manhole complete by removing all scum, sludge, silt (both organic and inorganic nature) by manual labour or mechanical scraper and disposal of the same and buried in trenches etc, as in foul condition for any depth complete all as specified and directed. Note: Net contents of sludge shall be measured at the time of removal and paid. Quoted rate of tenderer is deemed to be inclusive of deqatering as required and nothing extra shall be admissible to the contractor on this account.Sludge/ sludge water shall be diposed off in closed container at authorized dumping site delared by local administration outside MD land complete all as directed. by Engineer-in-charge.

Desilting of Septic tank etc by removing all scum, silt (both organic and inorganic nature) by mechanical / electrical power driven scraper and disposal of the same exceeding 100 m but not exceeding 250 m and buried in trenches etc, in foul condition for any depth complete all as specified and directed. Note: Net contents of sludge shall be measured at the time of removal and paid. Quoted rate of tenderer is deemed to be inclusive of deqatering as required and nothing extra shall be admissible to the contractor on this account.Sludge/ sludge water shall be diposed off in closed container authorized dumping site delared by local administration outside MD land complete all as directed. by Engineer-in-charge.

Dismantling of cast iron/AC/PVC pipes100/110mm dia, jointed in cement mortar and taking out of trenches if required complete all as specified and directed.

Dismantling of cast iron/AC/PVC pipes 75 mm dia, jointed in cement mortar and taking out of trenches if required complete all as specified and directed.

Supply and fix PVC(SWR) 110 mm bore pipe single socketed,in any length with rubber ring joints,laid or fixed to walls complete all as specified and directed by Engr-in-Charge. Make: Finolex, Superme, Prince

Supply and fix PVC(SWR) 75 mm bore pipe single socketed,in any length with rubber ring joints,laid or fixed to walls complete all as specified and directed by Engr-in-Charge. Make: Finolex, Superme, Prince.

Supply and fixing PVC(SWR) 110 mm bore pipe single socketed,in any length with rubber ring joints, laid in trenches or floors complete all as specified and directed by Engr-in-Charge. Make: Finolex, Superme, Prince.

Supply and fix PVC(SWR) 75 mm bore pipe single socketed,in any length with rubber ring joints, laid in trenches or floors complete all as specified and directed by Engr-in-Charge. Make: Finolex, Superme, Prince.

Re-fixing only cast iron/AC/PVC soil, waste and vent pipes 100 mm dia in any length with or without ears with cement joints fixed in wall complete all as specified and directed.

Re-fixing only cast iron/AC/PVC soil, waste and vent pipes 75 mm dia in any length with or without ears with cement joints fixed in wall complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 110 mm dia complete all as specified and directed. Make: Finolex, Superme, Prince.

Supply and fixing PVC (SWR) bends any radius 75 mm dia complete all as specified and directed. Make : Finolex, Superme, Prince.

Supply and fixing PVC (SWR) junction single,(single T) equal or unequal with access door having bore size 110mm complete all as specified and directed. Make: Finolex, Superme, Prince.

Supply and fixing PVC (SWR) junction single,(single T) equal or unequal with access door having bore size 75mm complete all as specified and directed. Make: Finolex, Superme, Prince.

Supply and fixing PVC (SWR) vent cowl 100 mm bore complete all as specified and directed.

Supply and fixing PVC (SWR) gully trap 125/110mm, setting & jointing with solvent cement fixed in repairs complete all as specified and directed by Engr-in-Charge. Make: Finolex, Superme, Prince.

M/S BUDHRAM BISHNOI

SHREE GURU NANAK CONSTRUCTION COMPANY