GE ELECT/D-11/2025-26

Amount

Dismantling/Taking down broken concrete/steel poles of any size complete all as specified and directed by the Engr-in-charge.

Taking down of existing street light from item No 1 above and fixing on new poles complete all as specified and directed by the Engr-in-charge.

Material and labour for excavation in trenches not exceeding 1.5 metre wide & not exceeding 1.5 meter in depth for foundation, laying of cable or pipe (where provided for protection of cable or fixing with poles and stays) and getting out in any type of soil including trimming the sides and forming bottom surfaces to required levels complete all as specified and directed by the Engg-in-Charge.

Material and labour for returning filling in, Including spreading, levelling, Watering and well ramming soil in layers not exceeding 25 cm thick complete all as specified and directed by the Engg-in-Charge.

Material and labour for removing excavated material (ie soil) from site to a distance n. exc 50 mtrs away and depositing where directed at a level n. exc. 1.5 mtr above the starting point complete all as specified and directed by Engr-in-Charge.

Material and labour for river washed and screened, dry sand for filling in trenches below and around underground cables for cushioning of cables etc complete all as specified and directed by Engr-in-Charge.

Supply & fixing of sub class B bricks of size 230mmx115mmx75mm having minimum compressive strength 75 Kg/ Sqcm laid in trenches for cable protection etc complete all as specified and directed by the Engg-in-Charge.

All as per srl item No 7 here-in-before but using old bricks complete all as specified and directed by the Engg-in-Charge.

Demolition of road, path, drain and concrete in ground floors, RCC/Brick wall (below or above ground level) complete all as specified and directed by the Engg-in-Charge.

Material and labour for PCC 1:3:6 type C-2 (using 40 mm graded aggregate) for foundation, filling and mass concrete or similar works complete all as specified and directed by the Engg-in-Charge.

Material and labour for cement concrete type B-1, 1:2:4, 20 mm thick (using 40 mm graded aggregate) for floors and paving or similar works complete all as specified and directed by the Engg-in-Charge.

Material and labour for cement concrete type D-2, 1:4:8 , 40 mm thick (using 40 mm graded aggregate) for floors and paving or similar works complete all as specified and directed by the Engg-in-Charge.

Supplying, laying, jointing testing and connecting in replacement XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armored, electric power cable (heavy duty) with multistranded aluminum conductors, IS 7098 marked, suitable for LT 1100 Volt system, laid in trenches fixed to pole, including jointing & testing complete all as specified and directed of following sizes:- Note:- Excavation, earth work ,cable protection , sand fillings , cable joint shall be measured and paid separately under respective items of schedule.

16 Sqmm 4 core

25 Sqmm 4 core

Material and labour for boring of hole under road/pavement/hard standing or any other situation by manual means and suitable for passing of GI pipe 40 to 100 mm bore and making good both ends complete all as specified and directed by the Engg-in-Charge.

Supply & Fixing in replacement GI Pipe (light grade) bore sizes 40 mm with necessary accessories/ fittings for cable protections/pole for crossing of culverts/nallah complete all as specified and directed by the Engg-in-Charge.

Supply & installing in in replacement of steel tubular swaged poles type 410 SP-31 (9 mtr long) of approx wt.147 kg conforming to IS 2713 (Part-II) including excavation, earth work, PCC foundation, base plate,PCC coping,GI pipe for cable protection etc. and GI bracket for fitting mounting, complete all as per manufacturer's instructions and all as specified and directed by the Engg-in-Charge. NOTE:- 1.The unit rate in this item is deemed to be included the cost of painting the steel pole with bituminous paint total length inside and up to planting depth outside and remaining portion of pole painted with two coat of aluminum paint over a coat of red oxide complete all as specified and directed. 2. PCC 1:4:8 D-2 Concrete 15cm Depth in bottom of Pit for bed concrete, PCC 1:3: 6 C-2 Concrete 1.5 Mtr Depth of concrete, PCC 1: 2: 4 for coping of above Ground level of steel pole. 3. Excavation, eath work and GI brackets/PCC foundation work will measured and paid separately under relevant item.

Supply & fixing of bracket for street light fitting complete with 1.5 to 2.2 mtr long 32/40mm dia GI pipe medium grade and including necessary mild steel clamp, nuts, bolts and washers and painting on steel surfaces with two coats of aluminum paint complete all as specified and directed by the Engg-in-Charge.

Supplying & fixing in replacement KIOSK box weather proof including made out of one piece mounted SMC base and door pole mounted hinged door size 333x233x120mm out side and 300x200x105mm inside dimensions comprising of aluminum bus bar 4 strips for 3 phase and neutral 63 Amps including embossing/painting of danger notice of size not less than 10cm x 7.5cm with letters, figures and conventional skull and bones in signal red color on front face of KIOSK box body including MS clamp of size 25x3 mm with suitable size nut, bolts & washer complete all as specified and directed by the Engg-in-Charge.

Material and labour for earthing in replacement complete with galvanized steel earth plate electrode of size 60cmx60cmx6 mm thick, buried directly in ground (earth pit not less than 2.10 m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level, connected to galvanized iron strip 32mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel as shown in electrical plate No 3 of SSR Part I, connected to earth test point and the equipment on the other nuts and washers of galvanized ironsides complete all as specified, including testing and commissioning complete all as specified and directed by the Engg-in-Charge. Note : (a) The unit rates quoted against this item shall be deemed to include the cost of excavation and earth work in any type of soil, common salt & charcoal dust in alternate layers, PCC 1:3:6 as in pit, precast RCC 1:2:4 type B-1 with necessary reinforcement as in cover & frame for pit, funnel, watering pipe 20 mm bore GI pipe light grade, protection pipe 40 mm bore GI pipe medium grade etc. (b) The quoted rates shall also deemed to include the cost of earth test point and earth strip/GI lead wire and protection pipe upto 7.5 meter beyond the earth plates electrode.

Supply drawing, connecting and testing in replacement of 3 core, 1.5 Sqmm PVC insulated and PVC round sheathed copper conductor (flexible ) industrial cable, 1100 Volts conforming to IS 694 in steel tubular poles from KIOSK box to street light fitting including providing suitable copper lugs complete all as specified and directed by the Engg-in-Charge.

Supplying & fixing in replacement of integral LED light fitting 72 watts comprising pressure die cast housing with power coated aluminum housing working as a heat shrink and toughened glass suitable for 32/40 mm OD pipe bracket IP-65 protection complete all as specified and directed by the Engg-in-Charge.

Note : Contractor should procure and provide 50 % of the material as listed above within 15 days of the placing of work order and shall be verified by the Engr-in-charge

Vijay Electricals (BID ID -3320354)

mayur enterprises (BID ID -3321226)

Rajindera Enterprises (BID ID -3319769)

M P TYAGI ENGINEERS AND CONTRACTORS (BID ID -3321292)

Commercial Traders (BID ID -3317132)

MV Engineers And Contractors (BID ID -3315266)