OUTSOURCING MANNING INCLUDING REPAIR AND MAINT TO ELECTRICALLY OPERATED LIFTS INSTALLED AT RHQ WORLI CORA WORLI MUMBAI UNDER GE DAMAN

Amount

Outsourcing of services for Manning and operation of electrically operated lifts (G + 10) of capacity 08 Passengers & 13 Passengers at CORA Worli including of lift car, machine room, control panel. Taking care of entire lift from any pilferage theft and damage maintaining of daily records of lift. In case of emergency or failure of power supply the attendant will carry out rescue operations by adopting necessary safety precuations by deploying lift attandant - 01 No in each shift of 08 hours duration required in 02 shifts in a day in all days including Sundays & Holidays comprising of the following shifts complete all as specified and directed Shift Timings:- (a) First Shift : 0600 hrs to 1400 hrs. (b) Second Shift : 1400 hrs to 2200 hrs.

Outsourcing of services for Manning and operation of electrically operated lifts (G + 3) of capacity 08 Passengers at RHQ Worli including of lift car, machine room, control panel. Taking care of entire lift from any pilferage theft and damage maintaining of daily records of lift. In case of emergency or failure of power supply the attendant will carry out rescue operations by adopting necessary safety precuations by deploying lift attandant - 01 No in each shift of 08 hours duration required in 02 shifts in a day in all days including Sundays & Holidays comprising of the following shifts complete all as specified and directed Shift Timings:- (a) First Shift : 0600 hrs to 1400 hrs. (b) Second Shift : 1400 hrs to 2200 hrs. Note for item No's 1 to 2. (a) In case of requirement Lift Attended / Electrician provided for one area shall be utilised in other areas at the descretion of department without any extra cost to the department (b) Uniform, expendable stores like cotton waste, greasing, cleaning, materials, tools, insulation tapes, stationery, safety devices, transportation etc shall be provided by the contractor and same is deemed to be included in contractor's quoted rates. (c) Rate quoted shall include for reliever duty/ leave/ reserve OFF for the personal employed. (d) The tradesmen provided by the Contractor shall have minimum ITI qualification from the state/central Govt recognised institute with 4 years experience. (e) The contractor shall submit ID Proof, residential proof, bank account details to department and obtain approval of GE before employing a person as Electrician/FGM/Pipe Fitter etc. (f) Payment to lift operator/rescue operator shall be done by crossed cheque only duly ensuring the minimum fare wages Act in vogue. (g) In case the rate quoted is less than the minimum fair wages as fixed by state Govt and central Govt, the Acceptaing officer shall reserve the rights to accept / reject the offer. (h) The contractor shall obtain and submit insurance policy of each trademen employeed by him. (j) Contractor shall install and maintain digital Bio- Metric attendence system at the installation as required to record the attendence of the personal and authorised admin for Bio matric machine will be the concern JE E/M Incharge of the installation all as directed by Engineer in Charge . Expenditure to this effect shall be included in quoted rate. (k) Incase of non deployement of operator on duty , non rectification of defects / cleaning of installation , non maintenence of log sheet and other record in the installation on particular day , it shall be considered that operator are absent on duty and recovery at double cost of rate quated by contractor shall be deducted by the Engineer in Charge from the dues without any notice to the firm . (l) The contractor shall obtain and submit lift safety inspection report for each lift from Govt lift inspector / any third party Govt accredited agency of Maharastra State once in the currency of the contract period. Cost shall be deemed to be included in the quoted rate.

Repair & routine maint of lifts( G+10) including carrying out checks and periodical services ( per month for each lift) of fully automatic electrically operated lifts of any capacity having dual power operated door, automatic levelling device and microprocessor based simplex collective control system with repair and replacements of unserviceable parts also maintaining the necessary documents, Make - ESCON, complete all as specified and directed by Engineer in charge Location - CORA Worli .

Repair & routine maint of lifts( G+3) including carrying out checks and periodical services ( per month for each lift) of fully automatic electrically operated lifts of any capacity having dual power operated door, automatic levelling device and microprocessor based simplex collective control system with repair and replacements of unserviceable parts also maintaining the necessary documents, Make - THYSSEN KRRUP, complete all as specified and directed by Engineer in charge .Location - RHQ Worli . Note for item no - 03 & 04 :- Spare/Parts shall be measured and paid seperately under respective items.

Dismantling and taking out unserviceable motor encoder of any type and any capacity and supply and fix new motor encoder as specified and directed by Engineer in charage ( Location - CORA Worli & RHQ Worli).

Supply & Fixing in repair of Landing operating Push Button unit with stainless steel sheet 2mm thick ( size ; 95 mm x 300 mm ) having push button for any type of capacity of lift and floor and combined LED position indicator and arrow indicator including cutting to wall for fixing of push button unit including making good to disturbe wall surfaces for lift of make ESCON installed at CORA worli,complete all as specified and directed

Supply & Fixing in repair of Landing operating Push Button unit with stainless steel sheet 2mm thick ( size ; 95 mm x 300 mm ) having push button for any type of capacity of lift and floor and combined LED position indicator and arrow indicator including cutting to wall for fixing of push button unit including making good to disturbe wall surfaces for lift of make THYSSEN KRRUP installed at RHQ worli,complete all as specified and directed by Engineer in charge .

Supply and Fixing in replacement of existing control system to CAN BAS controller based down collective control panel operated with 110V supply including component for trouble free ,maximum efficiency and longer life to the lift for 8 passenger lift (G+3) RHQ Worli complete all as specified and directed by Engineer in charge.

Disconnecting and taking out old existing unserviceable COP assembly and supply new car operating panel (COP) assembly with and including illuminated push button for floor position,alarm, nonstop door open, door close,cabin fan,cabin light stop,attendant out key etc with direction indicator of 7 segment display with CPI card and 2mm thick stainless steel face plate duly controlled and electric connection etc suitable for ESCON make lift installed at CORA worli,complete all as specified and directed by Engineer in charge.

Taking out unserviceable travelling cable from hoist way and supply and fixing new travelling cable PVC insulated,16 core,flat type with stranded copper conductor,1100 volts grade of size 1 sqmm ,conforming 2 relavant IS standard EN 50214 or IS 694 with the including crimping with lugs of appropriate thimbles ,suspended type , freely movabale with car cabin up and down between ground and upper floors including necessary proper connection etc with mid way junction and other connections required in circuit , complete all as specified and directed by Engineer in Charge Make: Rolliflex/ Flexon/ Altocab or equivalant.

Disconnecting and Taking out old existing shaft wiring and Supply and Fixing of shaft wiring in hoist way upto lower limit with PVC insulated copper conductor cable single core 1100 volts grade 0.5 sqmm FRLS wire including earth wire 1.00 sqmm confirming to IS 694 for controll to all function including in built connection for controll panel PCB , Hall push button fire switch and lower limit switch and including 24BG thick GI through with cap of suitable size(Trucking) in hoist way up to lower limit switch at ground floor to control following equipments from the control panel etc complete all as specified and directed. Make:Rolliflex/ Flexon/ Altocab or equivalant. (a)Mid way junction of travelling cable (b)All limit speed conrol switches (c)All safety switches and fire man switch (d)All operating panel & display

Supply and fixing in repairs 'maintenance and junction box' in 8 passenger capacity lift suitable for any type of floors of make ESCON installed in residental complex at coast guard worli,complete all as specified and directed.

Supply and fixing in repairs 'shaft information system' complete in 8 passenger capacity lift suitable for suitable for any type of floors of make ESCON installed in residental complex at coast guard worli,complete all as specified and directed.

Disconnecting and Taking down existing old unserviceable ARD control system with 4 Nos 12 Volts,17 AH batteries from machine room and Supply & Fixing and commissioning and testing new Automatic Rescue Device (ARD) including relays, PCB cards/dioders card and 4 Nos maintenance free sealed batteries of 12 volts , 17 AH (Make Exide/Amron) suitable for 8 passenger lift suitable for any type of floors installed in residental complex at coast guard worli,complete all as specified and directed by Engineer in Charge Make of ARD :ESCON or equivalent make as approved by GE.

Taking down old existing unserviceable overload warning indicator and supply and install new overload warning indicator all as specified and directed by Engineer in Charge

Disconnecting and Taking down existing old unserviceable Emergency Alarm with complete accessories and Supply and fixing new emergency alarm with complete accessories including rechargeable batteries along with box connecting cables suitable for suitable for any all as specified and directed by Engineer in Charge .

Disconnecting and Taking down existing old unserviceable bakelite sheet and M & L only bakelite sheet 3mm thick, fixed to aluminium frame, complete all as specified and directed . Note:- Item No 3 to 17:- Repair /Maintenance of lift work shall be carried out through approved agency holding proper licence with having adequate experience of similar work.

S&F standard aluminium section powder coated (minimum thickness of powder coating shall bo 50 micron and colour shall be as approved by GE ) as in frame,shutters for doors in any pattern, cut to size, jointed with cadmium plated steel screws,including rubber beading or gaskets for fixing bakelite sheet,provision of hinges,screws, plugs, handle, lock etc complete all as specified and directed (Aluminium section shall be of make jindal/hindalco/Indalco) Note:- Weight of Aluminium sections as per actual or as per IS or as per manufacture, whichever is less, shall only be considered for payment. Cost of other items/ accessories required for entire completion of the work shall be deemed to be included in the quoted rate. However bakelite sheet , wire cloth shall be measured and paid separately as supply only under respective item. Schedule of credit : Rs. 24620.00

Monarch Enterprises

Escon Elevators Pvt Ltd