E-Quotation For the work of Upgradation of Pilot Guest house to training center and miscellaneous works at JNPA

Amount

DISMENTALING & CIVIL

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 10 metres lead of:Contractor to use support props for beam and surround area before starting any breaking activities

Removing the Existing Toilet Plumbing Concealed Piping etc as per Required and shifting the material within site permices.

Providing, supplying, mixing and applying two coats of approved ROFF HYSEAL waterproofing compound (Product Code 201), as per the directions below. Surface preparation should include cleaning the surface of all dust, oil, grease, oil or any other surface treatment agent etc. All static cracks more than 1mm in width must be chased and filled with HYSEAL MODIFIED MORTAR and cured. All surfaces should be prewetted previously and sufficiently and HYSEAL MODIFIED MORTAR to be prepared by mixing HYSEAL, Cement and Sand in the proportion 1:1:4, first dry mixed and then water added to get a normal consistency (2.5 volumes of HYSEAL to 1 volume of water) to get a creamy layer and brush apply the same. The second coat should be applied when the first coat is still green and to be cured properly.

Providing and fixing Single patti door frame in Composite marble :Providing single sills (100 mm wide), jambs and frames of black/approved colour composite slabs of mininmum 15-18mm thick of approved quality, vein and colour with machine polished surface on a bed of cement mortar 1:4 including neat cement float, with cement slurry to match the colour of the slabs, curing polishing and rounding edges, cleaning etc. complete. (Basic rate Rs. 300/sft)

Providing and fixing Single sills, jambs and frames of black/approved colour granite slabs 20 mm thick of approved quality, vein and colour with machine polished surface on a bed of cement mortar 1:4 including neat cement float, filling joints with cement slurry to match the colour of the slabs, curing polishing and rounding edges, cleaning etc. complete. (Basic rate Rs. 165/sft)

Urinal Partition-Providing & fixing 18 to 20mm thick both side mirror polished approved colour Granite Urinal partitions of 600 mm wide & 1550 mm high or as per approved size with round edges moulding and fixed in C.M. 1:2and filling joints in white cement mixed with pigment to match the colour of granite including curing, cleaning as per Architects detailed drawing & design etc complete.Basic rate of Granite-150/Sft.

Providing and fixing gutter of 22 B.W.G.(0.8mm)plain galvanised iron sheets 120 cm wide with proper suport & Joint.

CARPENTARY AND INTERIOR WORK

Traning Table type -1, providing & Fixing Training table type -1(Size:- 1800mm x 600mm ) Top in 25mm thick ply with 2mm PVC edge lipping on all exposed edges, MS podwer coated legs and supporting MS cross beams as per detailed as per architect drawing.

Traning Table type -2, providing & Fixing Training table type -2(Size:- 1200mm x 600mm ) Top in 25mm thick ply with 2mm PVC edge lipping on all exposed edges, MS podwer coated legs and supporting MS cross beams as per detailed as per architect drawing.

Podium : Providing & suppling of Podium made by using 19mm,12 thk Mr. Grade ply with Laminate of approved make and as per Architect/ Clients design.

Supply & Installation of Rockwool insulation for acoustical applications, in panelling, Ceiling etc.

Acoustic Panelling - Providing and fixing acoustical panel on existing surface with adhesive , design of the panel to be as per drwaing and details .

Carpet Flooring - Providing and laying of Carpet Tile/roll over the specified area with following specification. The floor which recieves the carpet to be thourougly cleaned as per manufacturer's specification. The carpet is to be laid over a bed of manufacturer's approved adhesive spread evenly over the entire floor. The rate shall include cutting, trimming, fixing and clearing away of residual material to a location as directed. The rate shall also include supplying and laying of a protective layer of PVC or HDPE sheet of 50 microns thickness, held together with scotch tape. The laid carpet to be vacuumed after the removal of protective cover/on commissioning. If after the protective layer is removed and stains observed in the carpet because of inadequate protection, the same shall be shampooed and made good to the satisfaction of the Site In Charge /Engineer. The measurements of carpet will be the actual laid area( (.Basic Rate - 240/Sft)

Providing & Installation Aluminium Skirting of 100 mm Height of approved make. Skirting should be fixed on the wall / partitions / paneling / counters in line and level with screw nut bolts / press & fit system as per the company standered procedure including all, machinaries, tools, tackles, material, labour etc at all levels & as per the instructions of engineer Incharge. (Basic Rate: Rs.150/- RFT)

Back Painted Glass Paneling -Providing and fixing of approved 6mm thk Glass (Make : Saint Gobain/ form 5 or equivalent ) over existing 8/12mm thk ply backing/MDF & frame work. Glass to be fixed on existing ply backing/MDF using 3M double sided tape & Silicon Adhesives, including all necessary hardware, cutouts required for it etc., complete as per the detail drawing. Cost to include providing white paint of 100mm band behind the joints to avoid any visible black area.Care has to be taken to ensure a seamless jointing with adjacent material finishes & levels.

Meeting Table - 16 Pax : Providing & suppling of Meeting table made by using 19mm,12 thk Mr. Grade ply with Laminate of approved make and as per Architect/ Clients design. Size : 6000 x 2500 x 750mm H.

Meeting Table - 10 Pax (3800mm x 2400mm):Providing & suppling of Meeting table made by using 19mm,12 thk Mr. Grade ply with Laminate of approved make and as per Architect/ Clients design. Size : 3800 x 2400 X 750MM H.

Meeting Table - 8 Pax : Providing & suppling of Meeting table made by using 19mm,12 thk Mr. Grade ply with laminate of approved make and as per Architect/ Clients design. Size : 3200 x 1200 X 750MM H.

Meeting Table - : Providing & suppling of Meeting table made by using 19mm,12 thk Mr. Grade ply with Laminate of approved make and as per Architect/ Clients design. Size : 2100 x 1200 X 750MM H.

Pelmet-Providing and fixing pelmets 150x200 mm of below sizes with verticals & horizontal made of 19mm thk. commercial Ply along walls and partitions with necessary wooden / ply support. The ply shall be finished in 0.8 mm thick Laminate of approved shade & colour as approved by the Architect. The rate to be inclusive of all accessories, such as anchor fasteners etc. complete.

Traning Room Chair - Providing & supplying Training chair as approved by the Engineer in charge etc. all complete. (Wipro, featherlite or equivalent)

PLUMBING WORK

Providing & Fixing of Brass Ball Valve For Water Supply and Irrigation System

Brass Ball Valve 20mm Dia

Providing Fixing Testing & Commissioning Of PVC 6kg Pressure Pipe With Accessorise etc. Complete 40mm dia

Providing Fixing Testing & Commissioning Of PVC 6kg Pressure Pipe With Accessorise etc. Complete 50mm Dia

Providing Fixing Testing & Commissioning Of PVC Floor Trap With Accessorise etc. Complete 50mm Dia

Providing, laying and fixing P.V.C. pipe of 200mm dia. type-B with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

ELECTRICAL WORK

25.KVAR AHF Panel (Loc: Substaion Area)

Supplying, transporting to project site, installing and commissioning of floor mounted panel dust and vermin proof incorpoMtring the details as shown in the SLD.

Supply, installation, testing, and commissioning of following double door readymade recessed type MCB, DB, fabricated out of CRCA sheet and painted with powder coating process OR made out of scratch proof polycarbonate body and concealed in wall, or on surface or on steel column with necessary mounting frame complete as required along with gland covers at both ends IP43. (Make- Legrand or equivalent )

12 Way TPN Per Phase Isolaton DB with 25A/32A/63A FP MCB as incomer, 3no. 25A/32A/63A DP RCCB, 30mA, Si for Phase segregation and 6A-32A SP MCB-36no. as outgoing as per SLD

12 Way TPN Per Phase Isolaton DB with 25A/32A/63A FP MCB as incomer, 3no. 25A/32A/63A DP RCCB, 100mA, Si for Phase segregation and 6A-32A SP MCB-36no. as outgoing as per SLD

12 Way TPN Per Phase Isolaton DB with 25A/32A/63A FP MCB as incomer, 3no. 25A/32A/63A DP RCCB, 300mA, Si for Phase segregation and 6A-32A SP MCB-36no. as outgoing as per SLD

12 Way SPN DB with 25A/32A/63A DP RCCB as 30mA incomer, and 6A-32A SP MCB 10no. as outgoing as per SLD.

4 Way VTPN DB with 63A MCB incomer, 32A TP MCB 2 nos and 6A-32A SP MCB 6no. as outgoing as per SLD.

12 Way SPN DB with 25A/32A/63A DP MCB incomer, and 6A-32A SP MCB 10no. as outgoing as per SLD.

Supply, fixing, testing, of good quality industrial sockets with MCB's or MCB isolators of different ratings in readymade IP 42/44 Polycabonate unbreakable enclosure. Box should be suitable to terminate cables / wires easily, complete as required.(Make- Legrand or equivalent )

Supplying, transporting to project site, installing and commissioning of 63A, DP, MCB,10 KA in sheet metal enclosure.(Make- Legrand or equivalent )

CABLES : Supplying and laying in ready built-up trenches / excavated trenches, through hume pipes laid by other agencies / on walls or on walls of lift shafts or on columns or on ceiling using G.I. spacers and G.I. saddles / G.I clamps made from G.I. strips, or on cable trays (cable tray supply & installation covered under item D.3) with nylon cable ties, the following XLPE insulated 1.1 KV grade, armoured and overall sheathed copper / aluminium conductor cables are made to IS:7098 (Part-l) 1988. Note: The quantity given in the quantity column is only indicative. The contractor shall bring to site cables as per actual requirement. Note: A2XFY/A2XWY stands for aluminium conductor armoured XLPE cable, 2XWY stands for Copper Conductor armoured XLPE cable.

3.5C X 120 Sqmm. A2XFY Cable

EndTermination:Supplying and making end terminal joints to the following 1.1 KV grade PVC insulated armoured overall sheathed copper / aluminium conductor XLPE cables, using nickle plated cable glands, copper compression type cable sockets , PVC insulating tapes, etc.

3.5C X 120 Sqmm. A2XFY Cable

sub main Power Point wiring from distribution board to switch board using 2Rx4Sq.M.m & 1Rx2.5Sq.M.m FRLS PVC wire 1100 V grade in 25mm PVC conduit, including cost of providing saddles.

sub main Light Point wiring from distribution board to switch board using 2Rx1.5Sq.M.m & 1Rx1Sq.M.m FRLS PVC wire 1100 V grade in 25mm PVC conduit, including cost of providing saddles.

Supply, fixing, testing of readymade modular Power sockets with switch, in readymade modular box with switch plate. Box should be suitable to terminate flexible cables / wires easily, complete as required.(Make- Legrand or Equivalent )

2 Nos of 6A 5-pin sockets and 1 Nos 16A SP switch in suitable backbox along with front plate.

2 Nos of 16A 5-pin sockets and 2 Nos 16A SP switch in suitable backbox along with front plate.

1 Nos of 6A 5-pin sockets and 1 Nos 6A SP switch in suitable backbox along with front plate.

1 Nos of 16A 5-pin sockets and 1 Nos 16A SP switch in suitable backbox along with front plate.

Supply & installation 6/16A 3 pin top for AC machine

LIGHT FIXTURE

Supply, Installation & Commissioning of following lighting fixtures with required material including necessary accessories, wiring connection, chain, down drops, supports etc.(Make - Wipro, Havells, Legero 0r Equivalent)

15 Watt Recess Mounted Downlighter

9 Watt Recess Mounted Downlighter

LED Strips 5watt/mtr with 25watt Driver.

Floor Munted Decorative Light

Providing & Fixing 2mm thick SS cover plates. Cover plates shall be champhered at all edges

450mm X 450mm X 2mm for tile mounting.

350mm X 350mm X 2mm for tile mounting.

250mm X 250mm X 2mm for tile mounting.

Providing & fixing of Readymade Polycorbonate unbreakable Junction box with 15A, 4way connectors and knowout for 4 cable entry of following size.

100 x 100 x 50mm.IP65

300 x 300 x 50mm. IP65

Supply, installation, testing of disconnecting link box for lightning down conductor at 1mtr. from GL with SMC insulator & Gunmetal disconnecting link of 50x6mm GI conductor and 250mm.long with bolting arrangement for brass bolts & nuts of 12mmØ complete as required.

Earthing using maintenance free earth electrode with chemical treatment 3mtr. Long, inner pipe dia 40mm & outer pipe dia 80mm, Including boring of hole upto 6.5 mtrs. in all types of strata as required. The electrode shall be electrolytic grade GI tube pre-filled with hygroscopic powder and low resistive backfill material. (Earth Resistance value shall be achieved to less than 2 ohm)

Earthing using Maintenance free earth electrode with chemical treatment, 3mtr long, 32mm dia. high tensile, low carbon steel circular rod with molecularly bonded Copper of thickness 250 Micron on outer surface, 50x6mm Cu earthing strip from electrode terminal upto disconnecting link in chamber at top etc. Scope includes boring hole upto 6.5 mtrs in all types of strata as required.

Supply, fixing / placing of PVC pipe of 150mm dia.as casing to the earthing pit only for filling portion to retain surrounding soil. (Casing shall remain permanent for this filling area.)

Additional cost of Concrete inspection chamber with heavy duty concrete cover in lieu of brick masonary chamber & C.I. cover. Concrete chamber & cover shall be suitable for movement area / roads.

Supply, tagging, laying or fixing, testing of GI / CU earthing strip / wire in ground at a depth of 600mm including excavation in all type of strata except hard rock or in readymade trenches with necessary clamps, revette jointing as per specification complete as required.

25mm x 6 mm thick GI strip.

25mm x 3 mm thick CU strip.

25mm x 3 mm GI Strip down conductor mounted on porcelain insulator for Lightning Arrestor.

Supply and installation of earth busbar box consisting of 50 x 6 mm, 300mm long GI. Strip with multiple tapping and nut bolt arrangements etc. mounted on SMC insulators. Box shall be fabricated from M.S. sheet including powder coated, clear acrylic hinged door etc. complete.

UPS SYSTEM

Supply,Installation, testing & commissioning of 3Phase Input & 3Phase Output UPS with 30 minutes Battery back up and sealed maintenance free lead acid maintained in battery racks complete with interconnections, Cu battery cables, Battery breakers. The rack shall be sturdy M.S. section fabricated with powder coating The scope shall include terminals & busbar shrouding for Battery terminals & connections. (Note:- Battery store shall start 150mm above FFL.)

1 No. x 15kVA UPS arrangement as per given specifications and details.

Supply, Installation of Sealed maintenance free valve regulated lead acid (VRLA) Battery (with reverse polarity protection MCCB) as per specifications complete suitable for following UPS sizes (Bidder should furnish the battery calculations for 30 minutes backup along with the BOQ). Note: The scope also includes complete SITC of cables, DCDBs, DC MCBs, required for battery interconnection as well as interconnections betwwen batteries and UPS with required all accessories.

15 KVA UPS (30 minutes).

Installation of battery rack floor mounting as per specifications with necessary fabrication complete for following sizes.

15 KVA UPS (30 minutes).

Supply, installation of material equipment required as per statutorial provision & safety.

1.1 kV class Handgloves pair.

Laminated First aid chart with frame.

First aid box.

3 Nos. of Fire buckets with stand having weather shed canopy above the buckets with duly filled coarse sand and "FIRE" wriiten in English & "AAG" written in local (devnagari) language.

4.5 Kg. Co2 fire extinguisher mounted on wall. The Co2 Cylinder should be seamless type, ISI marked with monitoring tag & certificate. Vendor to also consider required identification mark (Std color coding, the extinguisher should be visible in No lights) as per Fire / IS Norms.

High Voltage Electrical Insulation Synthetic Mats, ISI Marked,confirming to IS:15652-2006. Types: Class C; for 1100V, Flame Retardant, Shock Proof, 1000 mm in width, pastable, Acid/Alkali/Diesel/Oil Resistant, CPRI/ERDA tested & Approved, Black/Gray in color etc.

415V Dangerboards of appropriate size & marking.

Dismantling of existing Insect Catcher Machine.

Dismantling of existing Cable Tray.

Dismantling the Earthing Strip and Conductor.

NETWORKING & TELEPHONE SYSTEM

SITC of fully loaded patch panel.

Supply of Booster Amplifier for PA system with RMS output (actual) 240 W . 240W,Power reduction on backup power -1 dB,Frequency response ,60 Hz to 18 kHz (+1 / -3 dB at-10 dB ref. rated output,Distortion,<1% at rated output, 1 kHz,Max power consumption 1600 VA, Multiple outputs - 70 V / 100 V and 8/4 ohm,Temperature controlled forced front to back ventilation, directly stackable. Make BOSCH

Supply, installation, testing and commissioning of 2 loop analogue addressable fire alarm panel with battery backup, it is a 318-point addressable fire alarm control panel with optional Digital Alarm Communicator / Transmitter and expandable to 636 addressable points with an optional second Signaling Line Circuit. Each loop support 159 detector & 159 devices.

Supply, installation, Testing & commissioning of LED Fire exit sinages os per design & Drawing or as per direction by Engineer In Charge Make - Prolight or Equivalent

HVAC SYSTEM

VRF Indoor units

CEILING MOUNTED COMPACT CASSETTE with wireless remote controller

2.0TR - 4-Way Cassette

2.6TR - 4-Way Cassette

4.0 TR - 4-Way Cassette

Installation, Testing & Commissioning of inverter /Digital scroll compressor with Variable refrigerant system connectable to multiple indoor units. Outdoor unit shall be Including rubber pads for outdoor units etc.

Installation of Outdoor Unit

Fabrication and installation of MS base frame for outdoor units complete with epoxy painting, vibration isolation pads, supports, hangers, brackets etc.

MS Fabricated stand for Outdoor Unit

Gas Charging Pressure Testing, Nitrogen flushing, gas charging,& testing of the airconditionign system.

Additional Gas Charging with R-410A Gas for Outdoor Unit

Supply, installation, testing, and commissioning of in-line fans comprising of Class I construction complete with TEFC induction motor

450cfm / 10mm SP

500cfm / 10mm SP

Fresh Air line Fan cabinet / circular type with filter

1000cfm / 30mm SP

AV WORK

Supply, Installation & Commissioning of Crystal LED Display

55 inch 4K Crystal UHD LED Display

65 inch 4K Crystal UHD LED Display for Business

75 inch 4K Crystal UHD LED Display for Business

Supply, Installation & Commissioning of86 inch Interactive whiteboard 2.18 m.

Supply, Installation & Commissioning of 5 ft drop Ceiling mountTV Stand

Supply, Installation & Commissioning of 4K PTZ Camera & 4K UHD camera, 71–degree Wide–angle Lens & 12 Times Optical Zoom Make - Kramer & Equivalent

Supply, Installation & Commissioning of Adjustable sound bar bracket

Supply, Installation & Commissioning of Audio Bar with Extention microphones Make - Kramer & Equivalent

Supply, Installation & Commissioning of USB—C Hub Multiport Adapter, 4K@60 HDMI output, 4K@60 DisplayPort output, USB 3.2 Gen 1 data and charging ports, Ethernet port, USB—C charging pass—through, Headset+mic port. Make - Kramer & Equivalent

Supply, Installation & Commissioning of 20–Port Audio Matrix with DSP, AEC and Interchangeable Inputs & Outputs,includes multi−channel DSP, AEC (Acoustic Echo Cancellation), mini USB, built−in 2x60W @ 8Ω and 1x120W @ 70V / 100V power amplifier, 4x4 Dante interface, HDMI embedding and de−embedding, USB, and S/PDIF.

Supply, Installation & Commissioning of 6.5–Inch, 2–Way Closed–Back Ceiling Speakers,Power Handling — 30W RMS, 80W Continuous, Impedance — 8Ω. UL 1480 & 2043 Listed Make - Kramer & Equivalent

Supply, Installation & Commissioning of Gooseneck Microphone with Base & Programmable Mute switch - Supply, Installation, Testing & Commissioning of metal Gooseneck with base ( ON/OFF button needed) and integrated Sennheiser KE10 microphone capsule,RF shielding against intermodulation from wireless devices, Streamlined design for seamless integration, Impedance < 100 Ω ,Frequency response (Microphone) 50 Hz - 20 kHz ,transducer principle (Microphone) pre polarized condenser microphone with Solid Microphone Standby-coloured light ring for clear visual feedback, Logical function for easy control, Phantom powering P 24 - P 48 ,Connector Logic: clip contact for logic, Pin assignment: trigger signal at the logic connector: Logic in (external LED control), GND, Logic out (switch signal)

Supply, Installation & Commissioning of Speaker bulk Cable Make - Kramer & Equivalent

Supply, Installation & Commissioning of Audio Cable Make - Kramer & Equivalent

Supply, Installation & Commissioning of Microphone cables Make - Kramer & Equivalent

Supply, Installation & Commissioning of USB Extender Cable 15 MtrMake - Kramer & Equivalent

Supply, Installation & Commissioning of High–Speed HDMI Cable. Kramer & Equivalent

High–Speed HDMI Cable 5 Mtrs

High–Speed HDMI Cable 7.5 Mtrs

High–Speed HDMI Cable 10 Mtrs

High–Speed HDMI Cable 15 Mtrs

High–Speed HDMI Cable 20 Mtrs

Design Edge Studio (BID ID -3147359)

Shandar Interior Pvt. Ltd. (BID ID -3147371)