Const of 45 MLD MPS, RCC Receiving Chamber, Screening Chamber, Collection tank etc. P and L of 600 mm id D.I. pipe raising main to MPS to existing pipe line , main sewer line to NP3 pipe 400 mm to 800 mm crossing of drin by

Amount

Design, drawing, construction of Main Sewage Pumping stations as detailed below consisting of , inlet chamber with sluice gate, screening chamber with screens made of SS- 316 , collecting tanks, CI/DI double flanged delivery pipe , NRVs, dismantling pieces, gate valves, header pipe , specials, lifting arrangement with RS joist & chain pullet block (2T) along with, installation, testing & commissioning of non- clog sewage submersible pumping sets all other Gaurd Room, electrical, mechanical, civil works complete in all respect as per scope of work & specification

Providing and fixing compact Non-Clog Sewerage submersible pumps for suitable rating, with non-clog free flow open impeller, minimum solid handling capacity of 28mm suitable for operation on 415 volts + 10% -10%, 50 C/s A.C single/3 phase supply, speed 960/1450 RPM including oil chamber, SS-304 guide Pipe - 15 mtr for lifting & lowering of pump, S.S.-304 lifting chain-10 mtr with following specifications: Automatic built-up water level controller with necessary length of cable upto control panel. Make KSB/KIRLSOKAR/AQUA/KISHORE Model SUITABLE (No. of Pumps : 3 no working)Electrical switch panel having all necessary accessories & safety devices of standard specifications. (1 Junction box alongwith necessary fittings for each pump). --1 No.

Discharge 7600 LPM. Head 20 m

Junction box near sump

Autocoupling for pump

Submersible Cable for above pumping set size of cable as per requirement from pump set to Junction box near sump (Maximum Length = 15 Mtr.).

Providing and fixing compact Non-Clog Sewerage submersible pumps for suitable rating, with non-clog free flow open impeller, minimum solid handling capacity of 28mm suitable for operation on 415 volts + 10% -10%, 50 C/s A.C single/3 phase supply, speed 960/1450 RPM including oil chamber, SS-304 guide Pipe - 15 mtr for lifting & lowering of pump, S.S.-304 lifting chain-10 mtr with following specifications:Automatic built-up water level controller with necessary length of cable upto control panel. ( Pumps : 2 no)(1 working + 1 Standby) Make KIRLSOKAR/AQUA/KISHORE, Model SUITABLE (Complete set as above with 1 no. pump. No extra payment shall be made for valves) Electrical switch panel having all necessary accessories & safety devices of standard specifications. (Panels with sump pumps near each sump as per site conditions). --1 No.

Discharge 235 cum/hr 4000 LPM head 20 m

Junction box near sump

Autocoupling for pump

Submersible Cable for above pumping set size of cable as per requirement from pump set to Junction box near sump (Maximum Length = 15 Mtr.).

Supply and fixing of SS 304 manual screens of size 900mm x 900 mm with 20mm opening Center to Center and size of each bar 10mm x 20mm thick including cost of fitting complete

Supply and fixing of sluice gates of size 900 mm x 900 mm in the opening of screen channel complete in all respects as per specification IS:3042 Make IVC NASIK, KIRLOSKAR

Supply, installation, testing and commissioning of following Drainage pumps Electrical control panel suitable for 415 V, 3 phase, 4 wires, 50 Hz power distribution system. The panel shall be free standing floor mounting sheet metal

Bus bars shall be provided with heat shrinkable sleeves and shall be colour coded. The panels shall be suitable for cable entry from top. The panels shall be fabricated after the approval of fabrication drawings.

All wires and cables used shall be FRLS. 2 Nos. earthing terminals shall be provided for 3 phase, 415 V, 50 HZ supply system. M Lifting hooks shall also be provided in case of large panels. Cadmium plated hardware shall be used in fabrication of Panels.

Incoming :

One (1) No. 200 A TPN 70KA MCCB with microprocessor overload and short circuit release load

C. T. operated / Direct Digital voltmeter/Ampere Meter.

1 Set (3 Nos) of phase indication lamps with 2 Amp SP MCB.

Electrolytic high conductivity aluminium three phase and neutral busbars rated at 120 amps having a maximum current density of 0.8 amp per sq mm suitable to with stand symmetrical fault level of 25 MVA at 415 volts. The neutral busbar is to be of 100% ca

OUT GOING

2 nos 63 Amp, 415 Volts TPN MPCB 15 KA having overload and short circuit protection with DOL Starter

Spare Feeder 20 H.P - 1 Nos. Fully automatic DOL starter

Each DOL Starter shall have

On-OFF Push Button / ON -OFF Indication Lamp, thermal O/L Type Relay, Contactor etc. as required.

Single Phase Preventor MPR D-2 current operated.

C. T. operated / Direct Digital Ampere Meter.

Spare NO-NC contacts for each starter

Each O/G feeder shall have

ON -OFF Indication Lamp

D.G. SET (300KVA) (WITH CANOPY)

Supply,installation, testing & commissioning of 300 KVA DG Set as per specification coupled with engine of Kirloskar make or equivalent from approved makes, 4/6 cylinder four stroke, heat exchanger water cooled developing suitable BHP(As per Faridab altitude) at 1500 RPM under NTP condition of BS 5514. The DG set shall be installed in accoustical room. The engine shall be complete with starting system with 24 volt DC supply having sealed maintenance free batteries of 180 AH, charger, inbuilt regulator, flywheel, coupling with guard, instrument panel, the engine shall be with exhaust mainfold, residential type silencer, electronic digital governor and safety system such as low lube pressure, high water temperature, over speed, low coolant level alarm etc. AVM pads, special tools operation manual, including first fill of lube oil with accoustic enclosure as per particular specifications.The engine & alternator shall be mounted on common base frame and shall be finally placed on RCC foundation of suitable size with anti vibration aggrangement..D.G Sets shall be with PCC for synchronising/ parallel operation and for protection/ metering.Water entering in DG Set Heat Exchanger should not be lower than 24 degree C due to Faridabad cold climatic conditions.D.G Sets

Prov. & installing transformer of 350 K.V.A 11/0.433 , 3 Phase 50 cycles coper wound, oil immered naturally cooled core type transformer confirming to IS 2026 Contained in mild steel radiator cooled tank with first filling of oil as per 335 complete to the satisfication of Engineer in charge .(Kirloskar ) including required Nos & height of polls and other material .

Supplying and fixing following DI/C.I. D/F pipe, CI Fitting & specials such as sluice valves with wheel, non return valves with G.M. Flap including cost of jointing materials, including making adequate supports of masonry / concrete / steel for delivery pipe from submersible pump set to valve chamber as per plan shown in the drawing

A) DI/CI D/F pipes

a) 150 mm i/d

b) 200 mm i/d

d) 300 mm i/d

B) DI/CI Fitting & Specials

a) DI/CI D/F Pipe bends, Y-Tee, reducers, tees, tail piece, blank flange, dismentling joints etc. up to 600 mm i/d

Provision for Double Flanged Swing Check Type Reflux (Non Return) Valves PN -1.6 Marked with IS: 5312 Part-1, ISI Marked including nuts & bolts marked with IS: 1363 , Ruber sheet marked with IS: 638 etc.carriage , loading unloading, stacking handling, Re- handling etc. Complete in all respect to the satisfaction of Engineer - in - Charge (Makes Kirloskar,IVC Nasik)

Providing and fixing cast iron double flanged sluice valves PN-1.6 Marked with IS: marked with IS:14846 ISI Marked including nuts & bolts marked with IS:1363 etc. Rubber sheet marked with IS:638 etc. carriage loading unloading, stacking handling, re-handling etc. complete in all respect. (Makes Kirloskar,IVCNasik)

Providing, and fixing of insulated rubber matting suitable for 11 KV installation 1 metre x 2 metre x 12 mm for site as per specifications given in .

Supply and Fixing of Gantry with chain pully for lowering and lifting of Submersible Pump at MPS including providing Girders, rails., Chainpully and their fixing with ancillary civil and machanical works complete in all respects (2MT Capacity) etc.

Supply and fixing of GI Class B medium duty hand railing on all structures of along all the stairs and walk ways and all process units, 90 cm height verticle member 50 mm dia 2 mm thick steel with spacing @1.2 mtr centre to centre and 2 nos horizontle members 1 no at top 40 mmd dia 2 mm thick sheet and 1 no at middle of 25 mm dia of 2 mm thick sheet.

Prov. & fixing of exhaust fans each having a capacity of 45 cubic meters per minutes complete with suitable GI sheet ducting in pump chamber if required ( Bajaj & crompton make)

Prov. & fixing of ceiling lans 48" i/d ( 1200 mm) with suitable GI pipe complete in all respect ( Bajaj & crompton make)

Supply and fixing of streets lights having height of 4 m with LED of 100 W including cost of cabling all other accessories complete in all respects.(Make: Bajaj, Philips, Havells, Cromption)

Construction of RCC foundation for D.G.Set including excavation, Fundation of Cement Concreate with base PCC of 1:4:8 of thickness 150mm and slab of RCC 1:2:4 of 300mm thickness

Construction of RCC foundation for Transformer including excavation, Fundation of Cement Concreate with base PCC of 1:4:8 of thickness 150mm and slab of RCC 1:2:4 of 300mm thickness

Providing and Fixing of Fire Fighting System including 5 Nos. sand backets with installation arregement on wall, 5 Nos. ABC Type Fire Extinguisher of capacity 5KG Each of reputed make

Providing, laying, jointing, fixing and testing G.I.Pipe line and specials,tee bends, sockets, elbove etc including making good the walls etc concealed pipe, including painting with anti corrsive bituministic paint, cutting cheases and making good the walls.

40 mm G.I.Pipe Medium class

15 mm G.I.Pipe Medium class

20 mm G.I.Pipe Medium class

Supply and installation of CCTV camers complete in all respect as per specification

Extra provision for making connection with the existing main 54'' Sewer line complete in all respects

Making connection to existing M.H.at Main Road including pluging of running swer line, all material and T& P complete in all respects.

Laying of Sewer Line By Tranchless Technology. in normal soil condition but not rock/bolder/any undergound utilities like foundation water supply line coming in alingment or other underground obstruction suitable for MS casing pipe of size complete for 1400 mm OD MS Pipe 12mm thick casing pipe. consisting with:- 1.Machinery on hire basis, Labour Heavy Hydraulic Crane, Jacking Machine & other necessary equipment HorizontalBoring/ Excavation. 2.Providing & Inserting of 1400 mm i/d M.S. casing pipe 12 mm thick(Fe-330 grade)Fabricated as per IS 3589 of 1991 from steel plates confirming to IS:-2062 including cutting, beveling, grinding & jointing with radiographically welding of pipe as per IS- 1182 and testing complete in all respect. 3.Inserting of 1000 mm & 900 mm OD HDPE-PE6 PN100 Sewer Pipe and testing complete in all respect. 4.Providing and Fixing of MS Spacer at a distnce of 2 Mtrs apart to avoid contract of casing pipe and carrier pipes complete - For 1000 mm OD MS casing pipe of size complete for 1400 mm OD .5.Excavation for receiving pit of size 4m x 4 m x 7 m normal excavation for laying of casing pipe and laying of sewer pipe complete to satisfaction of Engineer-in-change. 6.Both side Plugs :-Concrete block 1:1.5:3 on both ends to plug the angular space between casing and carrier pipe complete in all respects

Supplying, laying, jointing using heat fusion/electro fusion, cutting and testing of HDPE pipes dully ISI marked for sewer for sewer for at an average depth of 7.00 mtr and ancillary works by trenchless technology including civil and structural work required for laying in position as per given specifications all items of work i.e. soil investigation and excavation all works in or under water liquid mud and required, dewatering of sub soil water, road cutting, neccessary barricding, including of flickering lights etc, disposal of surplus earth as per direction of Engineer-in-charge. Submission of 3 sets of completion drawing showing completion of alignment, levels of the work etc. required for the successful completion of the work on turn key basis as per IS code 14333-1996 as amended upto date. Make:- Time Techno Plast, Duraline, Jain Irrigation. DN folowing O/D grade PE 100 PN-6 H.D.P.E.Pipe

a) 1000 mm O/D PE 100 PN 6 grade HDPE Pipe(ISO 4427)with wall thickness maximum 56.5 mm & minimum 38.4 mm .

a) 900 mm O/D PE 100 PN 6 grade HDPE Pipe(ISO 4427)with wall thickness maximum 56.5 mm & minimum 38.4 mm .

Operation & Mtc. of the complete scope of work mentioned in the DPR as per schedule-IV for a period of 5 yrs. (60 months) after three months of trial run

Operation & Mtc. during the defect liability period (Operation only)

1st year Operation & Mtc. after defect liability period

2nd year O & M

3rd Year O & M

4th Year O & M

5th Year O & M

Bidder Name

Amount

Brij Gopal Construction Co. Pvt. Ltd.

INTEGRAL SCREW INDUSTRIES

INTEGRAL SCREW INDUSTRIES

INTEGRAL SCREW INDUSTRIES