145-1 Financial year 2025-26 due to flood and heavy rain under special repair and improvement work of Sahaspur to Rajepur Khaddar Marg

Construction of sub grade and earthern shoulders with approved material obtained from borrow pits with all lifts and leads transporting to sites, spreading, grading to required slope and compacted to meet requirement of table 300.2 including all material, labour, T&P etc complete but excluding GST.

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method, with rotavator at O.M.C. and compacting with smooth wheeld roller to achieve the desired density, complete as per Technical Specification clause 401. including all material, labour, T&P etc complete but excluding GST.

Providing laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-10 Kn in stages to proper grade and camber applying and brooming crushable screening to fill-up the interstices of coarse aggregate watering and compacting to the required dencity grade 2 as per tech.spec.Clause 405 including all material, labour, T&P etc complete but excluding GST.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeld roller 80-100 kN in stages to proper grade and camber, applying and brooming stone screening / binding material to fill-up the interstics of coarse aggregate, watering and compacting to the required density.Grading 3 as per Technical Specification clause 405 .

Providing and applying Tack coat with bitumen VG-10 using Bitumen pressure distributer @ 0.30 kg. per sqm on the prepared dry and hungry bitumenious surface cleaned with Hydraulic broom as per Technical specification Clause 503. including all material, labour, T&P etc complete but excluding GST.

Providing, laying and rolling of open graded P.C. of 20mm thickness composed of 13.2mm to 5.6mm aggregates eigher using penetration grade bitumen or emulsion to required line grade and level to serve as wearing course on a previously prepared base i/c mixing in a suitable plant, laying and rolling with a three wheeld 80-100 kN static roller capacity, finished to required level and gredes to be followed by seal coat of eigher Type C as per Technical Specification Clause 508 including all material, labour, T&P etc complete but excluding GST.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 including all material, labour, T&P etc complete but excluding GST.

Please Enable Macros to View BoQ information