Installation of High mast light in front of Circus ground at Mankundu Station road UnderAPAS Scheme Booth 121 WARD18

Supply of 12.0 / 12.50 meter High mast lighting system with its accessories. Mast shaft shall be in two sections with steel material confirming to BSEN 10025 and material shall be high tensile steel, grade S355, hot dip galvanised confirming to BSEN ISO 1461 and suitable for wind velocity as per IS 875. It shall also include accessories for high mast including head frame, 2 continues steel wire rope 6 mm dia (7/19 construction),trailing cable, double drum winch, Galvanised Lantern carriage arrangement suitable for up to 9 luminaires symmetrically & its control gear( Make of Gear Box : New Allen Berry works /Chandra Gear / Elecon Engineering / Shanti Engineering) boxes and lightning finial. The mast shall have an integral power tool installed inside the base compartment for its operation along with Supply & Fixing of Cu Cable of Power Tool motor, Wiring for Luminaries, Anchor Plate, Foundation Bolt, Nut, Washer, and common Template all complete. Luminaire wiring materials not included in this item

Erection of high Mast (12.0 / 12.50 M) on RCC foundation with cement concrete considering actual SBC of soil, with the help of suitable modern engg. tools and Plants, wiring of luminaries with all wiring materials like PVC insulated flexible cable of suitable copper conductor core of 1.5 mm² lugs, up to 10 nos. 6A MCB along with construction of shallow foundation with cement concrete for high Mast considering the safe soil bearing capacity as per site condition, as per drawing and design of manufacturer of the mast. The soil test and submission of its report is within the scope of the work.

Supply and delivery of 120 watt LED Flood Light with pressure die cast aluminium housing, IP66 protection, road way luminarie with high power LED

Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting

Dual Channel Digital 24 hr & twilight DIN Ch. Timer System inside of a 16SWG MS sheet panel box as per suitable dimension with GL above 1 Mtr. (For Energy Saving Special Cut-off system as ref. on Comment Section ### : Supply, Fitting, Fixing & connection of following materials Switch gear list:(a) MNX12 contractor=2No., (b) DPMCB Standard Rating & Make apvd by EIC,=2Nos, (c) Time Switch (Digital)=2 Nos (accesories make: L&T/Legrand/Crabtree) etc connections incl chair 3 pole connector as I/C etc all complete as per modern engineering practice

Supplying & Erection of mini size feeder pillar box of Size (918 x 561 x 382 mm) made up of 2 mm thick MS Plate along with suitable M.S. Angle. The P.B. have double hinge door at the front & back with suitable locking arrangement. The box will be painted by 2 cores of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35 x 35 x 3 mm MS Angle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C

Installation the feeder pillar box only on cement brick foundation including plastering and neat cementing as per specification and direction of E.I.C

Supplying of Aluminium armoured cables:4 core 10 sqmm

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish -- From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc.

Supplying and fixing compression type gland complete with brass gland, brass ring, rubber ring for dust and moisture proof entry of XLPE/PVC armoured cables as below 4 core 10 sqmm

Finishing of the XLPE/PVC insulated armoured cable ends by crimping method incl supplying and fixing solderless socket(Dowels) type anticorrosive paste and jointing materials 4 core 10 sqmm

Earthing Installation - with Pipe Electrode: Earthing with 50mm(ISI-M) dia GI pipe 3.64mm thick x 3.04 Mtrs. Long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13mm dia x 80 mm long GI Bolts, double nuts, double washers incl. S&F 15mm dia GI pipe protection ( 1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 mtr below the ground level

S&F Lightning conductor Air-terminals made of 15mm dia 1500mm long GI pipe (ISI Medium) having five prongs of 4SWG GI (Hot Dip) wire at top with 85mm dia 6mm thick GI base plate at bottom incl. necessary holes etc. duly grouted on the parapet etc. in CC mortar (4:2:1)

Erection, testing & commissioning of up to 12.0 / 12.5 / 16.0 meter high mast on the existing civil foundation by bolts with suitable tools, tackles, machines etc, all complete, as per direction of the EIC.

Aviation Warning Light: SITC integral LED aviation light comprising of aluminium housing with polycarbonate enclosure on the top of the pole by suitable means with necy. Connections etc. complete [ Make: Bajaj, Model: BGAV 302 LED or similar eqlv. As per EIC ]

Add 18% SGST

Add 1% cess