Aluminium Chequered Sheet 2.03x813x2960mm.

Special Eligibility Criteria

1. 1

   a)The tenderer with past performance of satisfactory execution of contracts to SC Railway, or Other Zonal Railways/PUs for supply of the same / similar items (any aluminium grade/ designation of Aluminium Alloy Sheet and Strip as per IS:737 or Chequered/Tread Sheets of aluminium or its alloy as per IS:14712 or any aluminium sheet / angle/ channel as per relevant IS specification) for a quantity of 20 percent or more of tendered quantity against a single contract during last three years prior to, and excluding three years prior to, and excluding tender opening date may be considered as responsive to SC Railways requirements for placement of bulk/regular order. Tenderers are requested to submit the past performance report viz Copies of R Notes/CRAC/Proof of acceptance of material by consignee along with their offer. However, in cases where the tenderers are having satisfactory past supply performances of tendered items for stock items with SCR in PL 91012430, the supply performance data available in iMMIS with SCR shall be taken into consideration while evaluating the offers of the tenderers. b) If such past performance level is lower, then the offer may be considered as responsive to SC Railways requirements for placement of developmental order not exceeding 20 percent of the net procurable quantity. The tenderers, who have no past performance as above, may also be considered for such developmental orders, but for consideration of such developmental orders, they shall submit details of M & P, testing facilities, STR & QAP, technical manpower available, UDYAM Registration Certificate for same/similar items etc., along with their offer. c) Only OEMs or their authorized dealers are eligible to participate in the tender. In case, the tenderer participates as an authorized dealer, then the performance as required above shall be that of Principal (OEM) authorizing the agent or bidder for the same OEM. It may so happen that the agent/dealer has credentials of past supply for a different Principal/OEM, then it will not be Considered as performance. For Authorised dealers, tender specific authorization from OEM has to be uploaded with bid. d) For detailed instructions refer, GENERAL TENDER CONDITIONS attached with NIT and/or available as Public Document on IREPS website Goods and Services/South Central Railway.

   Document requiredConfirmation required
2. 2

   A) In Keeping with the Public Procurement (Preference to Make in India) Order, 2017, as amended, it has been found that there is sufficient local capacity and competition in supply of the tendered item of required quality and therefore public procurement of the item is restricted to Class I local suppliers only and the vendors who do not qualify to be Class I local suppliers should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a Class I local supplier for the tendered item participates in the tender it does so at its own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor. B) Provisions of latest Rly Bd letter regarding Public Procurement (Preference to Make in India), Order 2017 - Revision vide Lr. No. 2020/RS(G)/779/2/Pt.1(E3322671) dt 20.08.2024 are applicable.

   Confirmation required

Check List

1. 1

   Please go through Tender eligibility criteria before submission of offer.
2. 2

   Please go through Instructions to tenderers and General tender conditions of Tender before submission of offer. Having participated in the tender, it will be considered that you have gone through all the conditions and the same are accepted by you.
3. 3

   Please check that the offered description is exactly as per tendered description.
4. 4

   Have you ensured that while quoting the rates, you have clearly indicated the rate of applicable duties and taxes included in the prices quoted by you. Any variation in tax structure/rate due to introduction of GST, shall be dealt with under statutory Variation Clause.
5. 5

   Please check whether you have enclosed relevant document for MSEs to get benefit or preference under public procurement policy.

Commercial-Compliance

1. 1

   PVC CLAUSE : PVC is based with respect to NALCO INGOT price of Gr..IE07 with base price Rs.363350/- [base price] per MT as on 01.08.2026 [base date]. The quoted prices will vary in ratio 1:1. Any increase/decrease in the price of the above Raw material during the currency of the contract, the price of the finished product will be increased/ decreased on the ratio Of 1:1. The New Updated Basic Price for Payment will be calculated based on NALCO aluminium INGOT (IE-07) Price, ruling 30 days prior to date of Inspection. Firm to quote their offer with above PVC formula along with base date. Offers quoted with different base date or without PVC formula will be summarily rejected.

   Confirmation required
2. 2

   [a] All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per the GST Law. Firms must indicate its GST registration number along with their offer. [b] In case the successful tenderer is not liable to be registered under CGST/IGST /UTGST/SGST Act, The Railway shall deduct the applicable GST from his/their bills under Reverse Charge Mechanism (RCM) and deposit the same to the concerned tax authority. [c] The firm should indicate the tariff code (HSN Code) for claiming GST for the tendered item. [d] The offer shall be evaluated based on the GST rate as quoted by each bidder and same will be used for determining the inter-se ranking. While submitting offer, it shall be the responsibility of the bidder to ensure that they quote correct GST rate and HSN number.[e] It shall be the responsibility of the bidders to quote correct HSN number and corresponding GST rate. The Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate, if quoted by the bidder. [f] Wherever, the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the Purchase order or billed. [g] Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher taxbill as per invoice to match the All inclusive Price as mentioned in the Purchase order. [h] Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC.

   Document optionalConfirmation required
3. 3

   In case of road delivery, the date of delivery at destination [consignee's end] shall only be treated delivery date irrespective of FOR/F.O.T condition mentioned elsewhere in the contract/tender.

   Confirmation required
4. 4

   EARNEST MONEY DEPOSIT (EMD) shall be deposited by all vendors for tenders with estimated value above Rs. 10 Lakhs subject to the applicable exemptions: (a) EMD shall normally not be called against Limited tenders with estimated value up to Rs. 25 lakhs (including single tenders, global limited tenders) and Open Tenders with estimated value upto Rs. 10 lakhs. If considered necessary, authority competent to issue tender may incorporate the condition to call for EMD even in such limited tenders, on a case to case basis. (b) MSEs irrespective of relevance of product category registered with the UDYAM (UDYAM Registration Certificate) will be exempted from payment of earnest money in terms of Rly Bd Lr. No. 2022/RS(G)/363/1 dated 21.09.2022. (c) Other Railways and Government departments in terms of Rly Bd Lr. No. 2004/RS(G)/779/11 dated 24.07.2007. (d) Indian Ordnance Factories in terms of Rly Bd. Lr. No. 92/RS(G)363/1 dated 08.04.1993. (e) PSUs owned by the Ministry of Railways and PSUs for the group of items that are manufactured by them in terms of Rly Bd. Lr. No. 2003/RS(G)779/5 dated 10.09.2004. (f) Vendors registered with South Central Railway for the trade group of the item tendered upto their monetary limit of registration. (g) Vendors appearing on the approved vendors list of RDSO/PUs/CORE (As available on IREPS/UVAM), subject to approval status being valid on the date of tender closing. (h) Vendors registered with Railway Board/SCR for supply of medicine, medical equipment and consumables shall be exempted from submission of EMD for these items. (i) In the tenders issued against PAC, EMD shall be mentioned in tenders as the EMD exemption is applicable for OEMs in whose favor PAC is issued but not to the authorized agent. KVIC shall be exempted from EMD for items supplied by them.

   Document optionalConfirmation required
5. 5

   Note: (i) There shall be no exemption to such bidders from submitting EMD and SD for all tenders published during the period of time they are disqualified as per declaration signed by them. (ii) If authorized agents participate on behalf of OEM/vendors appearing on the approved vendor list of RDSO/PUs/CORE, such authorized agents can not claim EMD exemption based on its own or its OEM/Approved vendors MSE certificate. (iii) OEMs are not exempted from payment of EMD where the OEM has participated in the tender and requests to place order on their authorized agent. (iv) Others submitted without EMD will be summarily rejected. Firm agrees to pass on such additional set off / input tax credit as may become available in future under the GST provisions in respect of all the inputs used in the manufacture of the tendered item on the date of supply, by way of reduction in price and advise the purchaser accordingly.

   Document optionalConfirmation required
6. 6

   Offer should be kept valid for 120 days.
7. 7

   Firm willing to avail benefits of Micro and Small Enterprises, must submit documentary evidence of being Micro or Small Enterprises for tendered item in the certificate issued by nodal agencies as per Public Procurement Policy (i.e., UDYAM REGISTRATION CERTIFICATE), failing which firms offers will be treated as Non-MSE firm. For detailed instructions refer Para 15 of General Tender Conditions attached with NIT and/or available as Public Document on IREPS website Goods and Services/SCR. Failing which such benefit will not be extended to them.

   Document optionalConfirmation required
8. 8

   The bidders should quote the applicable HSN codes and it is the responsibility of the tenderer to quote the correct HSN code and upload the document.

   Confirmation required
9. 9

   PPP-MSE benefits are not applicable to authorized dealers or traders.
10. 10

    Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

    Document optional

1. 1

   Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted. Validity will be reckoned from the closing date of tender.

2. 2

   Firms are expected to quote for a quantity not less than 50% of the tendered quantity. Offers received for quantity less than 50% of tendered quantity will be considered unresponsive and will be summarily rejected.

3. 3

   The tender is floated with Price Variation Clause. Offers without PVC formula or with different PVC formula or with different base price or different base date compared to tendered PVC formula, base price and base date will be summarily rejected.