Repair/Maint of pipe lines, control valves, pumping system, LT switchgear and allied works at JNE, MAP Accns and STPs area under GE (Utilities) Udhampur.

Amount

M&L for replacement of unserviceable Air Grid of equalisation tank of size(5.7m x 5.7m x3.0m) at Sansar Chand STP of capacity 400 KLD complete all as specified and directed by Engr-in- Charge.

M&L for fixing of non-clog Submersible pump of equalisation tank of capacity 3 HP 3 Phase 415 volt, discharge cap 16 Cum/Hr at 400 KLD STP complete wiring connections with starters all as specified and directed by Engr-in- Charge.

Repair, maint / replacement of parts of air blower of capacity 180 Cum/Hr as follows :- (a) Replacement of Pully V Belt SPB-1800 (b) Ball Bearing 6311/C3 Make-SKF/ZKL (c) Roller bearing 3213A (d) Piston ring (e) Oil seal (f) Oil level glass (g) Suction air filter (h) Air compressor shaft welding, turning , grinding (j) Outer distance bush (k) Pressure ring (l) Asbestos graphite packing(casing cover) (m) Compressor Oil in air blower at STPs as directed by Engr-in-Charge.

Repair, winding, servicing , greasing, replacement of motor parts of capacity 15 HP of air blower at 400 KLD STP complete all as specified and directed by Engr-in- Charge.

Supply and fixing of Air Flow Meter / Rotameter 50 mm dia having range 250 - 500 Cum/Hr at 400 KLD STP complete all as specified and directed by Engr-in- Charge.

M&L for filling of filter media of MBBR I & II at 400 KLD STP complete all as specified and directed by Engr-in- Charge.

M&L for replacement of unserviceable Air Grid of MBBR Tank I & II of size(2.2 m x 2.2 m) at 400 KLD STP complete all as specified and directed by Engr-in- Charge.

M&L for fixing of media of Tube Settler (3.1m x4.7m x2.7m) tank at 400 KLD STP complete all as specified and directed by Engr-in- Charge.

M&L for replacement of unserviceable Hypo dosing pump of discharge capacity 0-6 LPH at 400 KLD STP complete all as specified and directed by Engr-in- Charge.

M&L for Rotational moulded polyethylene water storage tank of capacity 100 ltr for mixing of hypochlorite at 400 KLD STP complete all as specified and directed by Engr-in- Charge.

S&F of auto air release valve of capacity 3 hp, discharge 17.3 Cum/hr at 400 KLD STP complete all as specified and directed by Engr-in- Charge.

Repair/ replacement of Filter feed pump of capacity 3 HP, discharge 17.3 Cum/Hr at 400 KLD STP complete all as specified and directed by Engr-in- Charge.

M&L for replacement of coarse sand for SDB of size (5.9m x 5.9m x3m) at 400 KLD STP complete all as specified and directed by Engr-in- Charge.

S&F of Pressure Gauge with needle valve & bush of 100 mm dia having pressure range 0-7 Kg/Cm² at 400 KLD STP complete all as specified and directed by Engr-in- Charge.

S&F of NRV (Sandwich type) of size 65 mm dia at 400 KLD STP complete all as specified and directed by Engr-in- Charge.

S&F of level Control Switch (Float Type) at 400 KLD STP complete all as specified and directed by Engr-in- Charge.

M & L for cleaning of all STP Structure including MBBR, Sludge drying bed, tube settler, chlorine contact tank, treated water tank, filter feed tank, ACF DMF, etc at 400 KLD STP complete all as specified and directed by Engr-in- Charge.

Repair/ maint LT control panel and starter of Non clogging submersible pump set including wiring fault, thimbling, MCB, relay repair,etc at 400 KLD STP complete all as specified and directed by Engr-in- Charge.

M&L for replacement of unserviceable of Air Grid of equalisation tank of size(2.9m x 4.6 m x4.6 m) at AEE STP of capacity 250 KLD complete all as specified and directed by Engr-in- Charge.

M&L for fixing of non- clog Submersible pump of equalisation tank of capacity 2 HP, having discharge cap 12 Cum/Hr at 250 KLD STP complete wiring connections with starters all as specified and directed by Engr-in- Charge.

Repair, maint / replacement of parts of air blower of capacity 180 Cum/Hr as follows :- (a) Replacement of Pully V Belt SPB-1800 (b) Ball Bearing 6311/C3 Make-SKF/ZKL (c) Roller bearing 3213A (d) Piston ring (e) Oil seal (f) Oil level glass (g) Suction air filter (h) Air compressor shaft welding, turning , grinding (j) Outer distance bush (k) Pressure ring (l) Asbestos graphite packing(casing cover) (m) Compressor Oil in air blower at STPs as directed by Engr-in-Charge.

Repair, winding, servicing , greasing, replacement of motor parts of capacity 10 HP of air blower at 400 KLD STP complete all as specified and directed by Engr-in- Charge.

Supply and fixing of Air Flow Meter / Rotameter 50 mm dia having range 200-450 Cum/Hr at 250 KLD STP complete all as specified and directed by Engr-in- Charge.

M&L for filling of filter media of MBBR I & II at 250 KLD STP complete all as specified and directed by Engr-in- Charge.

M&L for replacement of unserviceable Air Grid of MBBR Tank I & II of size(2.0 m x 1.5 m) at 250 KLD STP complete all as specified and directed by Engr-in- Charge.

M&L for filling of filter media of Tube Settler (3.1m x2.1m x2.7m) tank at 250 KLD STP complete all as specified and directed by Engr-in- Charge.

M&L for replacement of unserviceable Hypo dosing pump of discharge capacity 0-6 LPH at 250 KLD STP complete all as specified and directed by Engr-in- Charge.

M&L for Rotational moulded polyethylene water storage tank of capacity 100 ltr for mixing of hypochlorite at 250 KLD STP complete all as specified and directed by Engr-in- Charge.

S&F auto air release valve of capacity 3 hp, discharge 17.3 Cum/hr at 250 KLD STP complete all as specified and directed by Engr-in- Charge.

Repair/ replacement of Filter feed pump of capacity 3 HP, discharge 17.3 Cum/Hr at 400 KLD STP complete all as specified and directed by Engr-in- Charge.

M&L for replacement of coarse sand for SDB of size (4.2 m x 4.2 m x3m) at 250 KLD STP complete all as specified and directed by Engr-in- Charge.

S&F of Pressure Gauge with needle valve & bush of 100 mm dia having pressure range 0-7 Kg/Cm² at 250 KLD STP complete all as specified and directed by Engr-in- Charge.

S&F of NRV (Sandwich type) of size 50 mm dia at 250 KLD STP complete all as specified and directed by Engr-in- Charge.

S&F of level Control Switch (Float Type) at 250 KLD STP complete all as specified and directed by Engr-in- Charge.

M & L for cleaning of all STP Structure including MBBR, Sludge drying bed, tube settler, chlorine contact tank, treated water tank, filter feed tank, ACF DMF, etc at 250 KLD STP complete all as specified and directed by Engr-in- Charge.

Repair/ maint LT control panel and starter of Non clogging submersible pump set including wiring fault, thimbling, etc at 250 KLD STP complete all as specified and directed by Engr-in- Charge.

Supply & Fixing in replacement of butterfly valve of size 100mm bore conforming to IS 13095 complete all as specified and directed by Engineer-in-Charge. Make :- ADVANCE / KARTAR/ JOHNSON/ Zoloto

All as per serial item No 37.00 here-in-before but of size 80mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 37.00 here-in-before but of size 65mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 37.00 here-in-before but of size 50mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 37.00 here-in-before but of size 40mm dia complete all as specified and directed by Engr-in-Charge.

Repair to old sluice valve of sizes 150 mm dia for check nut, refacing, regrinding & refixing at its original location including cleaning, repacking stuffing box of sluice valve & spindle including fixing & testing complete all as specified and directed by Engr-in-Charge.

S&F Cast Iron sluice valve of following size 150 mm dia (PN 1.6) ISI Marked with iron wheel head both end flanged, CI /steel spindle, non rising type complete with Neoprene rubber gasket, nuts, bolts and washers etc, complete all as specified and directed by Engr-in-Charge.

M&L for cutting of existing road for crossing of MS/DI/CI/GI pipes for laying of any size pipes including necessary exacavation and earth work including repairing the same as per existing complete all as specified and directed by Engr-in-Charge.

M&L for run lead joints for CI/DI of spigot socketed ends pipes of size 150mm bore in position providing new lead using good quality spun yarn complete all as specified and directed by Engr-in Charge .

Supply and fixing GI fittings medium grade ISI marked including complete all as required at site and as directed by Engr-in-Charge.

Elbow 65mm.

Socket 65mm.

Union 65mm.

Supply and mixing of Di Amonium Phospate fertilizer for developed bacteria in equilisation tank, MBBR 1 and MBBR 2 tanks of STP chamber complete all as specified and directed by Engr-in-Charge. Make: IFFCO or equivalent make as specified by E-In-C Branch.

Carrying samples for testing of treated water of STP and submission of detailed test report to the office of the Engr-in-charge and testing in NABL approved laboratory as approved by GE (a) Carrying out minimum essential testing of water as per IS 10500-1991 mandatory for chemical, odour, PH Value TSS, BOD COD residual chlorine total nitogen, sulphate, oil and grease ammonical Nitrogen (NH3-N) and Bacteriological total collifrom organisms per 100 Ml (MPN) and E colilie in 100 ml Note - rate quoted shall deemed to be included for :- (i) Cost of sterilised bottle as required (ii) To and from transportation charges for collection of sample (iii) testing to be done every 3 months or as and when directed by Engr-in-Charge.

Supply & pouring Bio-Culture in aeration tank/MBBR tank at STPs complete all as specified and directed by Engr-in-Charge.

Decoupling, disconnecting suction line and discharge line taking down from foundation, dismounting from base channels strip opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of pump sets and taking to workshop (if reqd) for repairs. Reassembling of pump set mounting and fixing on base channel, recoupling of suction & discharge line realignment commissioning and testing in respect of centrifugal/multistage pump of capacity 30 HP complete all as specified and directed by Engr-in-Charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of parts shall be measured and paid separately under respective item of sch 'A'.

All as per serial item No 46.00 here-in-before but capacity 10 HP complete all as specified and directed by Engr-in-Charge.

S&F new parts for single/multistage pump of capacity 30HP as per manufacturer's composition of existing make of pump as below complete all as specified and directed by Engr-in-Charge.

Pump impeller made out of stainless steel complete all as specified and directed by Engr-in-Charge.

Pump shaft stainless steel shaft complete with check nut and keys complete all as specified and directed by Engr-in-Charge.

Shaft sleeves complete all as specified and directed by Engr-in-Charge.

Casing bearing complete all as specified and directed by Engr-in-Charge.

Bearing housing complete all as specified and directed by Engr-in-Charge.

Tyre coupling/star coupling complete all as specified and directed by Engr-in-Charge.

Gland cup complete all as specified and directed by Engr-in-Charge.

S&F new parts for single/double stage pump of capacity 10HP as per manufacturer's composition of existing make of pump as below complete all as specified and directed by Engr-in-Charge.

Pump impeller made out of Bronze complete all as specified and directed by Engr-in-Charge.

Pump shaft stainless steel shaft complete with check nut and keys complete all as specified and directed by Engr-in-Charge.

Shaft sleeves complete all as specified and directed by Engr-in-Charge.

Casing bearing complete all as specified and directed by Engr-in-Charge.

Bearing housing complete all as specified and directed by Engr-in-Charge.

Tyre coupling/star coupling complete all as specified and directed by Engr-in-Charge.

Gland cup complete all as specified and directed by Engr-in-Charge.

Disconnecting electric connection of 30 HP motor, removing the UNSV motor from existing place by unscrewing the foundation bolts and nuts decoupling from the pump, setting aside and transporting to workshop for repairs including dismantling the motor,cutting/taking out burnt winding of stator, rotor, cleaning the slots, transporting back after repair/winding & re-assembling the same complete all as directed by Engr-in-Charge. Note: (a) Rewinding of motor will be measured and paid separately under relevent item. (b) The rates quoted shall be deemed to include the cost of loading/unloading, transportation, grease, nuts, bolts and washers of any size and shape as required at site and refixing of serviceable motor duly functional and testing complete at its existing location/position complete all as specified and directed by Engr-in-Charge.

All as per serial item No. 50.00 here-in-before but capacity of 10HP motor complete all as specified and directed by Engr-in-Charge.

Removing the burnt out winding from the rotor and stator, cleaning the slots, providing high quality of class'B' paper insulation inside the slots, rewinding the motor of capacity 10/30 HP as per existing with super enamel copper wire of same size and guage as per existing rapping up with high quality cotton tape and varnising with super quality oil including drying upto desired temperature and desired time. complete all as specified and directed by Engr-in-Charge. Note:- Cost of labour for winding deemed to be included in the rate quoted.

Supply and fixing of Pump bearing No. 6307 C3 complete all as specified and directed by Engr-in-Charge.

Supply and fixing of Pump bearing No. 7310 BECBJ complete all as specified and directed by Engr-in-Charge.

Supply and fixing of Motor bearing No. 7311 BECBJ complete all as specified and directed by Engr-in-Charge.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth,foundation etc. or for shafts, wells, cesspits, maneholes, pier holes etc. and taking out/laying of pipe lines of hard/dense soil. Complete all as specified and directed by Engr-in-Charge.

Returning, filling, levelling, spreading, watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed by Engr-in-Charge.

Removing surplus soil not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.

Taking up or down CI/DI/MS water mains pipe 200 mm bore (including all fittings), with flanged/welded butt joint/ spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed by Engr-in-Charge. Note : (i) Unserviceable items retrieved from site should be deposited in MES store by the contractor. (ii) Unserviceable items retrieved from site should be deposited in MES store by the contractor. (iii) cost of transportation of unsv materials from site to MES store deemed to be included in the quoted rates.

Refixing MS/DI/CI pipe obtained from item No. 59.00 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 200 mm bore complete inlcuding main / branch connections complete all as specified and directed by Engr-in-Charge.

Supply, laying, jointing and testing MS ERW pipe class 'B' of bore 200 mm having wall thickness 6 mm with permissible tolerance + 10% conforming to IS-3589, ISI marked alongwith circular welding joints laid in trenches/ along road/ on surface/ slopes/pillars/ culverts/ causeways etc, complete all as specified directed by Engr-in-Charge.

Taking up or down old unseviceable GI pipe of size 150 mm dia including all fittings complete all as specified and directed by Engr-in-Charge. Note : (i) Unserviceable items retrieved from site should be deposited in MES store by the contractor. (ii) cost of transportation of unsv materials from site to MES store deemed to be included in the quoted rates.

Refixing GI/CI pipe obtained from Item No.62.00 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 150 mm dia complete including main branch connections complete all as specified and directed by Engr-in-Charge.

Supply & fixing GI pipes of size 150 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge.

Taking up or down old unseviceable GI/CI pipe of size 100 mm dia including all fittings complete all as specified and directed by Engr-in-Charge. Note : (i) Unserviceable items retrieved from site should be deposited in MES store by the contractor. (ii) cost of transportation of unsv materials from site to MES store deemed to be included in the quoted rates.

Refixing GI/CI pipe obtained from Item No. 65.00 above and connections in new or old position (walls, trenches, ceiling and floors etc) of size 100 mm dia complete including main branch connections complete all as specified and directed by Engr-in-Charge.

Supply & fixing GI pipes of size 100 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge.

Taking up or down GI pipe bore of size 80mm dia including all fittings complete all as specified and directed by Engr-in-Charge.

All as per serial item No 68.00 here-in-before but of size 50mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 68.00 here-in-before but of size 40mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 68.00 here-in-before but of size 25mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 68.00 here-in-before but of size20mm dia complete all as specified and directed by Engr-in-Charge.

Refixing GI/CI pipe obtained from Item No. 68.00 above and connections in new or old position (walls, trenches, ceiling and floors etc.) of sizes 80 mm dia, complete including main/branch connections complete all as specified and directed by Engr-in-Charge.

All as per serial item No 69.00 here-in-before but of size 50mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 69.00 here-in-before but of size 40mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 69.00 here-in-before but of size 25mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 69.00 here-in-before but of size 20mm dia complete all as specified and directed by Engr-in-Charge.

Supply & fixing only GI pipes in repair of size 80 mm dia , medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge.

All as per serial item No 70.00 here-in-before but of size 50 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 70.00 here-in-before but of size 40 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 78.00 here-in-before but of size 25 mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 70.00 here-in-before but of size 20 mm dia complete all as specified and directed by Engr-in-Charge.

Decoupling, disconnecting sluice valve of size 300 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position complete all as specified and directed by Engr-in-Charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item.

Stem bush bronze complete all as specified and directed by Engr-in-Charge.

Gland flange cast iron complete all as specified and directed by Engr-in-Charge.

Stud/Bolt carbon steel complete all as specified and directed by Engr-in-Charge.

Stem nut/chaknut complete all as specified and directed by Engr-in-Charge.

Stem Stain less steel complete all as specified and directed by Engr-in-Charge.

Decoupling, disconnecting sluice valve of size 250 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position. complete all as specified and directed by Engr-in-Charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item.

Stem bush bronze complete all as specified and directed by Engr-in-Charge.

Gland flange cast iron complete all as specified and directed by Engr-in-Charge.

Stud/Bolt carbon steel complete all as specified and directed by Engr-in-Charge.

Stem nut/chaknut complete all as specified and directed by Engr-in-Charge.

Stem Stain less steel complete all as specified and directed by Engr-in-Charge.

Decoupling, disconnecting sluice valve of size 200 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position complete all as specified and directed by Engr-in-Charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item.

Stem bush bronze complete all as specified and directed by Engr-in-Charge.

Gland flange cast iron complete all as specified and directed by Engr-in-Charge.

Stud/Bolt carbon steel complete all as specified and directed by Engr-in-Charge.

Stem nut/chaknut complete all as specified and directed by Engr-in-Charge.

Stem Stain less steel complete all as specified and directed by Engr-in-Charge.

Decoupling, disconnecting sluice valve of size 150 mm taking down from pipe line opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of sluice valve and taking to workshop (if reqd) for repairs. Reassembling of sluice valve and fixing on its original position complete all as specified and directed by Engr-in-Charge. Note :(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates. (ii) S&F of spare parts shall be measured and paid separately under respective item.

Stem bush bronze complete all as specified and directed by Engr-in-Charge.

Gland flange cast iron complete all as specified and directed by Engr-in-Charge.

Stud/Bolt carbon steel complete all as specified and directed by Engr-in-Charge.

Stem nut/chaknut complete all as specified and directed by Engr-in-Charge.

Stem Stain less steel complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement cast iron sluice valve of sizes 200mm dia (PN 1.6) ISI Marked with iron wheel head both end flanged, steel spindle, non rising type complete with neoprene rubber gasket, nuts, bolts and washers etc, including taking down the old existing complete all as specified and directed by Engr-in-Charge. Note : (i) Unserviceable items retrieved from site should be deposited in MES store by the contractor. (ii) cost of transportation of unsv materials from site to MES store deemed to be included in the quoted rates.

All as per serial item No 75.00 here-in-before but of size 150mm dia complete all as specified and directed by Engr-in-Charge.

All as per serial item No 75.00 here-in-before but of size 100mm dia complete all as specified and directed by Engr-in-Charge.

Supply fabrication and fixing MS joints like bends Tee, tapers, collars, elbow, tail piece (any type) caps, plugs up to 100 mm to 150 mm bore complete all as specified and directed by Engr-in-Charge.

Supply and fixing leather gasket including replacement old UNSV gasket for 300/250 mm complete all as specified and directed by Engr-in-Charge. Note:- (i) Contractor fully responsible for necessory excavation for replacement of gaskit work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate.

Supply and fixing leather gasket including replacement old UNSV gasket for 200/150 mm complete all as specified and directed by Engr-in-Charge. Note:- (i) Contractor fully responsible for necessory excavation fo rreplacement of gaskit work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate.

Supply and fix in replacement of cast iron air release valve with two air outlets of size 100 mm dia including all jointing materials like high pressure rubber gasket nuts, bolts, washers with arrangement for fixing, including taking down complete.Item Code No/ Size CI 026/N complete all as specified and directed by Engr-in-Charge. Note : (i) Unserviceable items retrieved from site should be deposited in MES store by the contractor. (ii) cost of transportation of unsv materials from site to MES store deemed to be included in the quoted rates.

All as per serial item No 81.00 here-in-before but of size 80 mm dia and Item code No/ Size CI 026/L complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of cast iron non return valve suitable for 250 mm bore pipe heavy duty both end flanged of pressure rating PN 1.6 and jointing with the rubber or fibre board gasket complete with and including required nos size of nuts, bolts and washers including taking down the old existing. Item Art No : 1083C complete all as specified and directed by Engr-in-Charge. Note : (i) Unserviceable items retrieved from site should be deposited in MES store by the contractor. (ii) cost of transportation of unsv materials from site to MES store deemed to be included in the quoted rates.

All as per serial item No 83.00 here-in-before but of size 200 mm dia and Item code No/ Size CI 026/L complete all as specified and directed by Engr-in-Charge.

All as per serial item No 83.00 here-in-before but of size 150 mm dia and Item code No/ Size CI 026/L complete all as specified and directed by Engr-in-Charge.

M&L for repair to leaking run lead joints in CI/DI spigot and socket end pipe line of 300 mm bore by providing new lead ,using good quality spun yarn, including necessary excavation, returning filling in trenches in any type of soil,bailing out water, and at any depth complete all as specified and directed by Engr-in-Charge. Note:- (i) Contractor fully responsible for necessory excavation for jointing work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate. (ii) Required extra fittings/pipe will be measured and paid separately.

All as per serial item No 86.00 here-in-before but of dia 250 mm bore pipe complete all as specified and directed by Engr-in-Charge.

All as per serial item No 86.00 here-in-before but of dia 200 mm bore pipe complete all as specified and directed by Engr-in-Charge.

All as per serial item No 86.00 here-in-before but of dia 150 mm bore pipe complete all as specified and directed by Engr-in-Charge.

Material and labour for repair to leaking flanged/circular welding joints of 100 to 200 mm bore MS/GI pipe line by providing rubber or fiber board gasket, new flanges if required at site, nut bolts, washers and welding works where required etc, including necessary excavation, returning filling in trenches in any type of soil, bailing out water, and any depth complete all as specified and directed by Engr-in-Charge. Note:- (i) Contractor fully responsible for necessory excavation for jointing work required T&P equipment, mechanical excavation work and man power at site requirement with making good disturbed surfaces of road/wall/floor etc and matching with existing surface included quoted rate. (ii) Required extra pipe will be measured and paid separately.

All as per serial item No 90.00 here-in-before but of dia 250 to 300 mm bore pipe complete all as specified and directed by Engr-in-Charge.

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) cement concrete in as in foundation filling of pole & stay complete all as specified and directed by Engr-in-Charge.

M&L for Premix ready mix road repair patching compound for instant road repair manufactured with a blend of bitumen, aggregates and high grade polymer to ensure immediate bonding with existing surface available in bag of 25 Kg complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of gun-metal, globe or gate valves, 50mm dia , heavy duty, with iron wheel head, screwed both ends (ISI marked), including taking down the old existing complete all as specified & directed by Engr-in-Charge.

All as per serial item No 94.00 here-in-before but of dia 40 mm gate valve complete all as specified and directed by Engr-in-Charge.

All as per serial item No 94.00 here-in-before but of dia 25 mm gate valve complete all as specified and directed by Engr-in-Charge.

All as per serial item No 94.00 here-in-before but of dia 20 mm gate valve complete all as specified and directed by Engr-in-Charge.

All as per serial item No 94.00 here-in-before but of dia 15 mm gate valve complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of terminal box suitable for 30 HP motor as per existing specification including taking down the old existing terminal box complete all as specified and directed by Engr-in-Charge.

All as per serial item No 99.00 here-in-before but of for 10 HP MOTOR complete all as specified and directed by Engr-in-Charge.

M&L for spray painting of pump and motor, frame including surface preparation by scrapping with emery paper or grinder with two coat of synthethic enamel paint over one coat of red oxide primer of existing colour complete all as specified and directed by Engr-in-Charge.

M&L for writing the with brush about the machinery installed in different instalations eg Cap, discharge,MES No,Year of installation and head of the machinery on the wall in front of the pump motor with black paint including removing the existing paint with help of grinder complete all as specified and directed by Engr-in-Charge.

M&L in replacement of aluminium lugs suitable for 185 Sqmm aluminium cable including taking down the existing unserviceable one complete all as specified and directed by Engr-in-Charge.

M&L in replacement of aluminium lugs suitable for 95 Sqmm aluminium cable including taking down the existing unserviceable one complete all as specified and directed by Engr-in-Charge.

Supply and laying in replacement of synthetic rubber insulated mats 10 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006,( superseding IS 5424) suitable for electrical shock safety of sizes 2mx1m complete all as specified and directed by Engr-in-Charge.

Supply and fix Gland packing type 3 of size 12 mm made of asbestos grip with silicon complete all as specified and as directed by Engr-in-Charge.

Supply and lay DWC (Double wall corruguated) pipe 77/63 mm conforming to IS: 14930/IS 16205 for protection of earth strip/cable including necessary snap-fit coupler reqd for fixing complete all as specified and as directed by Engr-in-Charge.

Supply and lay DWC (Double wall corruguated) pipe 90/63 mm conforming to IS: 14930/IS 16205 for protection of earth strip/cable including necessary snap-fit coupler reqd for fixing complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in repair to GI fittings medium grade ISI marked including cutting, screwing etc including taking down complete all as specified and directed by Engr-in-Charge.

Elbow 15mm.

Elbow 20mm.

Elbow 25mm.

Elbow 40mm.

Elbow 50mm.

Elbow 80mm.

Socket 15mm.

Socket 20mm.

Socket 25mm.

Socket 40mm.

Socket 50mm.

Socket 80mm.

Union 15mm.

Union 20mm.

Union 25mm.

Union 40mm.

Union 50mm.

Union 80mm.

Elbow reducer 20 x 15mm.

Elbow reducer 25 x 20mm.

Elbow reducer 40 x 25mm.

Socket reducer 25x20mm.

Socket reducer 40x25mm.

Socket reducer 40x20mm.

Socket reducer 50x25mm.

Nipple 15 x50mm.

Nipple 15 x100mm.

Nipple 20 x50mm.

Nipple 20 x 100mm.

Nipple 25 x 50mm.

Nipple 25 x 100mm.

Nipple 40 x 50mm.

Nipple 40 x 100mm.

Nipple 50 x 50mm.

Nipple 50 x 100mm.

Tee 15mm.

Tee 20mm.

Tee 25mm.

Tee 20x15mm.

Tee 25x20mm.

Tee 40x15mm.

Tee 40x20mm.

Tee 40x25mm.

Tee 50x25mm.

Dead plug 15mm.

Dead plug 20mm.

Dead plug 25mm.

Dead plug 40mm.

Dead plug 50mm.

Lead wool.

PAUL TRADERS

BARU ENTERPRISES

PREM NATH KHAJURIA AND SONS