MISC REPAIRS TO PLASTERING TILING FLOORING JOINERY PLUMBING WORKS INCLUDING PETTY REPAIR AND WELCOME MAINT OF OFFRs TMQ AND MD ACCNS ETC IN OLD CAMP AREA AT AFSSR UNDER GE AF GURGAON

Amount

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc. complete all as specified and as directed.

Demolition reinforced cement concrete in roofs, floors (other than ground floors), beams staircases, landing, chajjas, Shelves and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

Demolition of Cement Concrete in sunken floors and pavings exc 15 cm thickness above ground level and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and as directed.

Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitions etc complete all as specified and as directed.

Dismantling Floor, Paver Tiles, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and as directed.

Taking down Chowkats or frames from the opening of size exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr each with shutters ( without taking off shutters from the frames) complete all as specified and as directed.

Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and as directed.

Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete and refixing in the same opening after easing and adjustment complete all as specified and as directed.

Hacking out old brocken glass ( any thickness , size , quality or description ) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads and removal for site complete all as specified and as directed.

Taking down cast iron soil waste and vent pipes of any description with fitting and making good to disterbed surfaces complete all as specified and as directed.

Taking down or up galvanised steel tubing 15mm bore medium grade and connection and cleaning the same and refixing the same in the same position/other position with all new fittings complete fixed to walls/ceiling or laid in floors complete all as specified and as directed.

Taking down or up galvanised steel tubing 20mm bore medium grade and connection and cleaning the same and refixing the same in the same position/other position with all new fittings complete fixed to walls/ceiling or laid in floors complete all as specified and as directed.

Dismantling damaged/unserviceable GI Snap Grid Ceiling Frame Work with Ceiling Boards of any description, complete all as specified and as directed.

Dismantling damaged/unserviceable Galvalume, AC and Fiber Sheeting of any gauge and thickness, complete all as specified and as directed.

Dismantling Structural Steel or Mild Steel Work of any description including Framed Truss, etc., complete all as specified and as directed.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and as directed.

M&L for Rendering (External) 15mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces, mixing WPC as per manufacturers instructions, Plastered Surfaces finished Fair and Even, complete all as specified and as directed. NOTE: WPC will be Measured and Paid under appropriate Item. Area includes in this items upto 4 stories of building.

M&L for rendering 15 mm thick on brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling/ struts in patches in CM 1:3. finishing even and smooth without using extra cement complete all as specified and as directed.

M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed of size 6mm with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed.

M&L for preparing newly wall / Rough Cast plastered surfaces of Walls and applying Two Coats of acrylic Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for three coats of white wash on New plaster surface of ceiling including prepration of surface complete all as specified and as directed.

M&L for One coats of white wash on old plaster surface of ceiling including prepration of surface complete all as specified and as directed.

M&L for preparation of old surfaces of walls by washing rubbing down and stopping of surface and applying one coats of cement base paint complete all as specified and as directed.

M&L for preparing Old plastered surface of walls and applying two coat of oil emulsion distemper white or any tint etc complete as specified and as directed .

M&L for preparing Old plastered surface of walls and applying one coat of oil emulsion distemper white or any tint etc complete as specified and as directed.

M&L for preparing old Decorated/Treated Plastered surfaces of Walls upto four storey by brooming down or steel wire brushing and scraping down and repair with putty wherever required and applying Two Coats of Acrylic Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for preparing newly Plastered surfaces of Walls upto four storey by applying 1 mm Wall Putty, cutting/rubbing to obtained a Smooth Surface and applying Two Coats of Acrylic Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparing old Treated/Painted Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L for Finishing walls with textured interior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sq complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm wood grain printed PVC sheet reinforced with MS Squre Tube in opening etc complete all as specified and as directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side Prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement including rawl plugs etc in the frame at site as per specification & drawing etc complete all as specified as directed.

S&F 2nd class hard wood 35mm thick Plain framed, factory made, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply on both faces. (The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated) complete all as specified and as directed.

S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.

S&F 2nd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed.

S&F pressed steel frames 1.25mm thick for door size of frame 105 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and as directed.

S&F pressed steel frames 1.25mm thick for door size of frame125 X 60mm with double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and as directed.

M&L for preparation of new wooden surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed.

S&F Mild steel sliding door bolts 300mm long with hasp, staple (bolt type) , stove enameled black with bolt not less than 12mm dia with and including a minimum of 6 bolt and nut complete all as specified and as directed.

S&F Mild steel barrel tower bolts, 150mm size, stove enamelled black, with bolt complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt of extruded section 200mm size, stove enamelled black, with bolt complete all as specified and as directed.

S&F Aluminium handles, 150mm size cast type anodised complete all as specified and as directed.

S&F Double legged Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm complete all as specified and as directed.

S&F stainless steel 100 mm long butt hinges for PVC door shutters and frames complete all as specified and as directed.

S&F Butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 150mm long ordinary rat tail rod pattern spring, including roller and roller plate complete all as specified and as directed.

M&L for Steel Work in Tubular Trusses including Special shaped Washer etc. complete using ERW or Induction Butt Welded Tubes, confirming to IS-1161-1979 Grade-240, complete all as specified and as directed.

S&F in repair Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in Roof Covering/ Cladding to Wall, fixed with self-tapping Screws, complete all as specified and as directed.

S&F Godrej pattern mild steel cup board with shutter made out of 1.2mm M.S. sheet 60cm depth sides incl with back & 3 shelves & vertical partition & mild steel door shutter two leaves with frame, incl necessary fittings with locking arrangement and handle etc all as per Godrej Pattern with duplicate keys including necessary fittings & two coats of spray painting over a coat of red oxide zinc chromate primer complete. The cupboard to be fixed to wall with 6 Nos of hold fasts of 25 x 3mm flat iron, 15cm long. The cost of hold fasts & grouting them in CM (1:3) is deemed to be included in unit rates (Only front face of cupboard to be measured), including taking down old unserviceable cupboards complete all as specified and as directed.

M&L for Vitirified Ceramic Tiles 10mm thick (Square/Rectangular), Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Floors, etc. set and jointed in Neat Cement Slurry and pointed in White or Coloured Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed.

M&L for Vitirified Ceramic Tiles 10mm thick (Square/ Rectangular) Light shade, Polished, area of each Tile not exc. 0.36 Square Metre in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed.

M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed.

M&L for non-skid tiles ceramic coloured tiles 7 to 8 mm thick of size 300mmx300 mm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) complete all as specified and as directed.

M&L for Coloured Glazed Ceramic Tiles 300x450x7mm thick in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:4, complete all as specified and as directed.

M&L for Floor (Paver) Tiles 300x300x9.0 to 10mm, highly abrasive, Anti-skid, Impact Resistance, laid over and including 20mm thick Screed or Screed Bed in Cement Mortar 1:6, complete all as specified and as directed.

M&L for Exterior (Matte Finish) Coloured Ceramic Tile 300x450x7.0 to 8.0mm thick in Vertical Surface i.e on exterior wall, facade, outer gate etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed.

M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick ( as approved by GE) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc laid over including 15 mm thick cement screed bed in CM 1:6 . complete all as specifed and as directed.

M&L for granite (Black) stone slab 18-20mm thick machine cut and machine polised, in skirting, Kitchen platform /dado etc laid over cement screed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including pinning in brick/concrete wall to hold & support the vertical surfaces to granite work including drilling to wall & including screed bed 15 mm thick in cement mortar 1:4 complete all as specified and as directed by Engineer-In- Charge.

S&F 15 mm bore dia galvanized steel tubes medium grade with all fittings laid concealed in walls including cutting through wall, floors, etc and their making good, incl Taking down or up steel tubing 15mm bore and connections complete all as specified and as direced.

S&F 20 mm bore dia galvanized steel tubes medium grade with all fittings laid concealed in walls including cutting through wall, floors, etc and their making good, incl Taking down or up steel tubing 20mm bore and connections complete all as specified and as direced.

S&F rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position incl S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed incl Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr complete all as specified and as directed.

Disconnecting existing tanks 500 ltr capacity, setting aside (or lowering of required) for repairs , cleaning, etc. and hoisting if required reconnecting and refixing in position incl Cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc and write date of cleaning on tank in format of DD.MM.YYYY complete all as specified and as directed.

S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore complete all as specified and as directed .

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 15 mm bore complete all as specified and as directed .

S&F in repair angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore dia pipe complete all as specified and as directed .

S&F in repair Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed 15 mm dia bore dia pipe complete all as specified and as directed.

S&F in repair Bib taps, cast copper alloy chromium plated, fancy type with crutch or butterfly handle , screwed down , scrwed for iron pipe or for brass ferrule and fixed for 15 mm dia bore dia pipe complete all as specified and as directed.

S&F in repair 15mm bore Pillar taps fancy type, cast copper alloy, with long swan neck, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed

Supply and fix in repairs chromium plated brass central hole WHB mixer 15 mm bore chromium plated, fancy type including joints to hot and cold , including taking down complete all as specified and as directed.

S&F Brass Chromium Plated Mixture Unit Hot and Cold for Shower suitable for fixing 15mm bore (dia) Pipe including Flange, suitable for bath mixture including taking down complete all as specified and as directed.

S&F Brass Chromium Plated Sink Mixer 15mm bore (dia), Wall mounted with 122mm (5") Swivel Spout, Connecting Legs including Wall Flanges ,including taking down complete all as specified and as directed.

S&F Door Closer Aluminium (Die Cast) Body, hydraulically regulated, Designation No. 3, Universal type, suitable for Door Shutters of 851mm to 1000mm in width and of weight between 61.00 to 80.00 Kilogram and fixed-in-repairs, complete all as specified and as directed.

S&F Glass corner self chromium plated fancy type cast copper alloy complete all as specified and as directed. Cat Part No ACN-CHR-1173 of Make : JAQUAR or equivalent out of makes specified in list of makes.

S&F glass self 600mm long complete all as specified and as directed. Cat Part No ACN-CHR-1171N of Make : JAQUAR, or equivalent out of makes specified in list of makes.

S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back type) / oval in shape with Waste Fitting Brass Chromium plated 32mm dia, PVC Waste Pipe 32mm bore (dia) of suitable Length, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed surfaces in Cement Mortar 1:3 and fixed-in-repairs, complete all as specified and as directed.

S&F Sink without Drainage Board made of Stainless Steel l.0mm thick Kitchen or Laboratory overall size 810x510x205mm having Bowl size 405x354x203 mm with Plugs, Washers and Wastes, PVC Waste Pipe 40mm bore (dia) of suitable Length, etc. including bedding in Cement Mortar to Dwarf Wall or including fixing Cantilever Brackets and connecting Union to Pipe and fixed-in-repairs, complete all as specified and as complete all as specified and as directed.

S&F Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces and Fixed-in-repairs, complete all as specified and as directed.

S&F Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts and Making Good to Floor/ distrubed surfaces and fixed-in-repairs, complete all as specified and as directed. MAKE : HINDUSTAN SANITARYWARE 21027/ JAQUAR CNS-WHT553SN/ PARRYWARE C-0252(S) or eqivalent out of makes specified in list of makes.

S&F Plastic Water Closet Seat Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device and fixed-in-repairs, complete all as specified and as directed. MAKE : JAQUAR CNS-WHT-111N or eqivalent in CERA/ HINDUSTAN SANITARYWARE/ PARRYWARE or eqivalent out of makes specified in list of makes.

S&F One Piece Euorpen Water Closet Concealed of size 790x360x650mm Snow White, Soft Close Seat Cover having Twin Flush Fittings and Making Good to Floor/ distrubed Surfaces and fixed-in-repairs, complete all as specified and as directed. MAKE : JAQUAR SLS-WHT-6851S (WC), or eqivalent in CERA/ HINDUSTAN SANITARYWARE/ PARRYWARE or eqivalent out of makes specified in list of makes.

S&F Health Faucet with Wall Hook, Chromium Plated having 1.00 Metre long with PVC Hose Pipe and fixed in repairs, complete all as specified and as directed. MAKE : JAQUAR ALD-CHR-585 or equivalent in GEM/ MARC or eqivalent out of makes specified in list of makes.

M&L for PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and Handle, PVC Waste Pipe 32mm bore (dia) of suitable Length, a pair of Cast Iron Bracket/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F Brass Chromium Plated Tubular Towel Rail 20mm dia ‘D’ type 60 Cm long with Brackets and Fixed-in-repairs, complete all as specified and as directed.

S&F in repair chromium plated shower roses 125 mm with or without swivel joints,any size including fixing to steel pipe or union for 15mm bore of pipe complete all as specified and as directed.

S&F alive maze over head shower with shower arms complete all as specified and directed of Cat Part No OHS-CHR-85859M of Make : JAQUAR, or equivalent out of makes specified in list of makes.

S&F in repair Stainless Steel Plate Rack 75x75x25 Cm in size (weight not less than 8 Kg), made out of Stainless Steel 1.0mm thick with all Internal Fittings and fixing with Brass Chomium Plated Mild Steel Screws and fixed to wall , complete all as specified and as directed.

S&F in repair Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw including taking down old curtain rod of any description, complete all as specified and as directed.

S & F for 100 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls with GI stack clamps complete all as specified and as directed.

S & F for 75 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls with GI stack clamps complete all as specified and as directed.

S & F for 50 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls including necessry GI stack clamps complete all as specified and as directed.

S & F for 100 mm bore cast iron bends of (any radius), dimnishing piecs or taper (larger bore measured) fitted with oval access door complete all as specified and as directed.

S & F for 75 mm bore cast iron bends of (any radius), dimnishing piecs or taper (larger bore measured) fitted with oval access door complete all as specified and as directed.

S & F for 75 mm bore out let cast floor trap with gratings including jointing to waste pipe fixed in cement concrete type (B-1) 1:2:4 etc complete all as specified and as directed.

S & F cast iron cowls of 50 mm size complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/fixed to wall complete all as specified and as directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F powder coated (min thickness of powder coating 50 micron) aluminium three track window shutter (size 45x15mm) i.e two shutter with 4.8mm thick tinted glass and one with stainless steel wire cloth of 0.36mm dia and average width of apprature 1.40mm and sliding section confirming section cat No 20814 (from jindal) and frame (chowkat) of size 101.60x44.45x1.90mm thick etc including locking arrangement including Aluminium Grill from outside complete all as specified and as directed. NOTE : Cost of Black/Tinted Sheet Glass, Stainless Steel Wire Cloth, Jointing & Packing Materials, anodized Aluminium Fittings, etc. shall deem to be include in the Quoted Unit Rate.

S&F window or ventilators section of frame 72x55mm fixed to wall or concrete surface with rowl plugs made of galvanised steel powder coated and section of shutter 47x20mm mulion section 72x50mm (Based steel as per IS 513 "D" quality galanised as per IS 277 with zinc of 120 gms/sqm) glazed or gauged and wire gauge shutter prepare to receive wire mesh to the shutter (Double door shutter) with total coated thickness of 0.6mm including grills/guard bars made of square bars powder coated fixed to window frame with screws including necessary fittings and all builders hardware such as handles, tower bolts and stays etc complete all as specified and as directed. Make : NCL type-4000 Series or equivalent out of makes specified in list of makes. (Note : Glass and wiremesh shall be measured and paid separately under respective items)

S&F in repair Coloured PVC Board 18 mm thick weight not less than 10kg/Sqm as required in Door, Shelves for Cup Boards or Kitchen Cabinets, one side laminated, one side plain , jointed by means of PVC Adhesive Solvent and fixed using Self-tapping Aluminium Screws,including Locking Arrangements, complete all as specified and as directed.

S&F in repair Frog hinges/slip on cabinet hinges by making adequate hole in 18 mm board from inside and fixed to cupoard shutter and frame by screw, complete all as specified and as directed.

S&F Stainless Steel Silver chrome Door Handle 100mm long, suitable for fixing of Brass screws inside of the board etc, and Fixed-in-repairs,complete all as specified and as directed.

M&L for 15 mm thick plaster in CM (1:4) mixed with water proofing compound on roof slabs finished even and smooth without using extra cement after cleaning of roof surfaces with wire brushes complete all as specified and as directed. Notes : WPC shall be measured and paid seperately

M&L for applying evenly 3 coat of elastomeric liquid applied membrane of Home Shield PU roofkoat of Berger or equalvent out of makes specified in list of makes as in Roof portion where leakage and seepage are noticed and as directed by approved applicater. Note :- Authorised applicater is approved by GE.

S&F GI Powder coated GI Snap Grid Frame Work of size 605x605mm as in False Ceiling with supported hanging of Mild Steel Rod of 'J' Bolt, complete all as specified and as directed.

S & F in repairs 4 mm thick designer Fibre cement board ( E-board) Tile of size 595x595 mm of approved texture, blossom, fixture and primer finished complete , complete all as specified and as directed. Note : Weight not less than 4.84 Kg /m2.

M&L for 12 mm thick perforated particle board/ tiles for insulation and accoustic purposes, 60x60 cm in size,fixed with nails or with staple in ceiling/ timber frame complete all as specified and as directed.

M&L for preparation of new steel surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed .

S & F in repairs 6mm Non asbestos fibre cement building boards fixed to walls or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed .

M&L for Running welding in repairs Exc 6 mm but n exc 9mm complete all as specified and as directed .

M&L for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, roof padding, Rounded & chamferd on edges, staging of water tank, benching etc and similar nature of works mixed with water liquid proofing admixture as per manufacturer's instruction including finishing even and smooth using extra cement and rounded or chamfered on edges and necessary foamwork complete all as specified and as directed. Note :- (i) WPC shall be measured and paid separately. (ii) Rates include to carried out the work on roof slab upto 4th stories building & nothing extra shall be admissible on this account).

S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty or fixing in NCL windows with rubber beading in square n exc 0.5 sq.m. in each pane complete all as specified and as directed.

M&L for dismantling of existing Rubber Pressed, Glossy finsh Pre-Cast concrete interlocking tiles any shape and size of 60/80mm thickness and refixing the same after excavating/levelling the ground surface etc complete all as specified and as directed. Note : If any PCC required for subbase and sand cushion shall be paid seperately in appropriate item.

M&L for Rubber Pressed, Glossy finsh Pre-Cast concrete interlocking coloured paving block of glass fibre reinforced vibro compacted any shape and size conforming to IS-15658:2006 of 60mm thickness made with M-35 grade concrete match with grey cement and pigment etc complete all as specified and as directed.

M&L for 25mm thick sand cushioning including watering and consolidations etc complete all as specified and as directed.

M&L for 50 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor complete all as specified and as directed .

M&L for Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 25mm thick in Sub-base (Levelling course for laying Tiles in Flooring), complete all as specified and as directed.

M&L for Cement Concrete 1:2:4 (20mm graded stone aggregate) 40mm thick as in Flooring, finishing Cement Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L for Fibre Glass Reinforced Translucent Plain Sheeting 2.0mm thick with 20 Cm Side Lap and 15 Cm End Lap, fixed with Coach Screw and Washer in Roof, Walls, MS Gates etc., complete all as specified and as directed.

M/S Rohit Enterprises

shiv shanker enterprises

SHAKSHI ENTERPRISES

kalakriti enterprises

Chaudhary Constructions

Orbital Infra Power

akhil enterprises

k k enterprises

M/s GANJOO AND CO

M/S ujjwal associates